| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142 |
- ;
- ; MGCP Configuration for Asterisk
- ;
- [general]
- ;port = 2427
- ;bindaddr = 0.0.0.0
- ; See https://wiki.asterisk.org/wiki/display/AST/IP+Quality+of+Service for a description of these parameters.
- ;tos=cs3 ; Sets TOS for signaling packets.
- ;tos_audio=ef ; Sets TOS for RTP audio packets.
- ;cos=3 ; Sets 802.1p priority for signaling packets.
- ;cos_audio=5 ; Sets 802.1p priority for RTP audio packets.
- ; --------------------- DIGIT TIMEOUTS ----------------------------
- firstdigittimeout = 30000 ; default 16000 = 16s
- gendigittimeout = 10000 ; default 8000 = 8s
- matchdigittimeout = 5000 ; defaults 3000 = 3s
- ; ----------------------------- JITTER BUFFER CONFIGURATION --------------------------
- ; jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of a
- ; MGCP channel. Defaults to "no". An enabled jitterbuffer will
- ; be used only if the sending side can create and the receiving
- ; side can not accept jitter. The MGCP channel can accept jitter,
- ; thus an enabled jitterbuffer on the receive MGCP side will only
- ; be used if the sending side can create jitter and jbforce is
- ; also set to yes.
- ; jbforce = no ; Forces the use of a jitterbuffer on the receive side of a MGCP
- ; channel. Defaults to "no".
- ; jbmaxsize = 200 ; Max length of the jitterbuffer in milliseconds.
- ; jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is
- ; resynchronized. Useful to improve the quality of the voice, with
- ; big jumps in/broken timestamps, usually sent from exotic devices
- ; and programs. Defaults to 1000.
- ; jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of a MGCP
- ; channel. Two implementations are currently available - "fixed"
- ; (with size always equals to jbmax-size) and "adaptive" (with
- ; variable size, actually the new jb of IAX2). Defaults to fixed.
- ; jbtargetextra = 40 ; This option only affects the jb when 'jbimpl = adaptive' is set.
- ; The option represents the number of milliseconds by which the new
- ; jitter buffer will pad its size. the default is 40, so without
- ; modification, the new jitter buffer will set its size to the jitter
- ; value plus 40 milliseconds. increasing this value may help if your
- ; network normally has low jitter, but occasionally has spikes.
- ; jblog = no ; Enables jitterbuffer frame logging. Defaults to "no".
- ; ----------------------------------------------------------------------------------
- ;[dlinkgw]
- ;host = 192.168.0.64
- ;context = default
- ;directmedia = no
- ;line => aaln/2
- ;line => aaln/1
- ;; The MGCP channel supports the following service codes:
- ;; # - Transfer
- ;; *67 - Calling Number Delivery Blocking
- ;; *70 - Cancel Call Waiting
- ;; *72 - Call Forwarding Activation
- ;; *73 - Call Forwarding Deactivation
- ;; *78 - Do Not Disturb Activation
- ;; *79 - Do Not Disturb Deactivation
- ;; *8 - Call pick-up
- ;
- ; known to work with Swissvoice IP10s
- ;[192.168.1.20]
- ;context=local
- ;host=192.168.1.20
- ;callerid = "John Doe" <123>
- ;callgroup=0 ; in the range from 0 to 63
- ;pickupgroup=0 ; in the range from 0 to 63
- ;nat=no
- ;threewaycalling=yes
- ;transfer=yes ; transfer requires threewaycalling=yes. Use FLASH to transfer
- ;callwaiting=yes ; this might be a cause of trouble for ip10s
- ;cancallforward=yes
- ;line => aaln/1
- ;
- ;[dph100]
- ;
- ; Supporting the DPH100M requires defining DLINK_BUGGY_FIRMWARE in
- ; chan_mgcp.c in addition to enabling the slowsequence mode due to
- ; bugs in the D-Link firmware
- ;
- ;context=local
- ;host=dynamic
- ;dtmfmode=none ; DTMF Mode can be 'none', 'rfc2833', or 'inband' or
- ; 'hybrid' which starts in none and moves to inband. Default is none.
- ;slowsequence=yes ; The DPH100M does not follow MGCP standards for sequencing
- ;line => aaln/1
- ; known to work with wave7optics FTTH LMGs
- ;[192.168.1.20]
- ;accountcode = 1000 ; record this in cdr as account identification for billing
- ;amaflags = billing ; record this in cdr as flagged for 'billing',
- ; 'documentation', or 'omit'
- ;context = local
- ;host = 192.168.1.20
- ;wcardep = aaln/* ; enables wildcard endpoint and sets it to 'aaln/*'
- ; another common format is '*'
- ;callerid = "Duane Cox" <123> ; now lets setup line 1 using per endpoint configuration...
- ;callwaiting = no
- ;callreturn = yes
- ;cancallforward = yes
- ;directmedia = no
- ;transfer = no
- ;dtmfmode = inband
- ;setvar=one=1 ; Set channel variables associated with this incoming line
- ;setvar=two=2
- ;line => aaln/1 ; now lets save this config to line1 aka aaln/1
- ;clearvars=all ; Reset list of variables back to none
- ;callerid = "Duane Cox" <456> ; now lets setup line 2
- ;callwaiting = no
- ;callreturn = yes
- ;cancallforward = yes
- ;directmedia = no
- ;transfer = no
- ;dtmfmode = inband
- ;line => aaln/2 ; now lets save this config to line2 aka aaln/2
- ; PacketCable
- ;[sbv5121e-mta.test.local]
- ;host = 10.0.1.3
- ;callwaiting = 1
- ;canreinvite = 1
- ;dtmfmode = rfc2833
- ;amaflags = BILLING
- ;ncs = yes ; Use NCS 1.0 signalling
- ;pktcgatealloc = yes ; Allocate DQOS gate on CMTS
- ;hangupongateremove = yes ; Hangup the channel if the CMTS close the gate
- ;callerid = 3622622225
- ;accountcode = test-3622622225
- ;line = aaln/1
- ;callerid = 3622622226
- ;accountcode = test-3622622226
- ;line = aaln/2
|
