| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207 |
- ;
- ; Skinny Configuration for Asterisk
- ;
- [general]
- bindaddr=0.0.0.0 ; Address to bind to
- bindport=2000 ; Port to bind to, default tcp/2000
- dateformat=M-D-Y ; M,D,Y in any order (6 chars max)
- ; "A" may also be used, but it must be at the end.
- ; Use M for month, D for day, Y for year, A for 12-hour time.
- keepalive=120
- ;authtimeout = 30 ; authtimeout specifies the maximum number of seconds a
- ; client has to authenticate. If the client does not
- ; authenticate beofre this timeout expires, the client
- ; will be disconnected. (default: 30 seconds)
- ;authlimit = 50 ; authlimit specifies the maximum number of
- ; unauthenticated sessions that will be allowed to
- ; connect at any given time. (default: 50)
- ;vmexten=8500 ; Systemwide voicemailmain pilot number
- ; It must be in the same context as the calling
- ; device/line
- ; If regcontext is specified, Asterisk will dynamically create and destroy a
- ; NoOp priority 1 extension for a given line which registers or unregisters with
- ; us and have a "regexten=" configuration item.
- ; Multiple contexts may be specified by separating them with '&'. The
- ; actual extension is the 'regexten' parameter of the registering line or its
- ; name if 'regexten' is not provided. If more than one context is provided,
- ; the context must be specified within regexten by appending the desired
- ; context after '@'. More than one regexten may be supplied if they are
- ; separated by '&'. Patterns may be used in regexten.
- ;
- ;regcontext=skinnyregistrations
- ;allow=all ; see https://wiki.asterisk.org/wiki/display/AST/RTP+Packetization
- ; for framing options
- ;disallow=
- ; The imeddialkey option allows for a key to be used to immediately dial the already
- ; entered number. This is useful where the dialplan includes variable length pattern
- ; matching. Valid options are '#' and '*'. On devices with soft buttons, a button will
- ; be available to immediately dial when a pattern than can be dialed has been entered.
- ; Default is unset, that is no immediated dial key (softbutton still exists).
- ;
- ;immeddialkey=#
- ; See https://wiki.asterisk.org/wiki/display/AST/IP+Quality+of+Service for a description of these parameters.
- ;tos=cs3 ; Sets TOS for signaling packets.
- ;tos_audio=ef ; Sets TOS for RTP audio packets.
- ;tos_video=af41 ; Sets TOS for RTP video packets.
- ;cos=3 ; Sets 802.1p priority for signaling packets.
- ;cos_audio=5 ; Sets 802.1p priority for RTP audio packets.
- ;cos_video=4 ; Sets 802.1p priority for RTP video packets.
- ; ----------------------------- JITTER BUFFER CONFIGURATION --------------------------
- ;jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of a
- ; skinny channel. Defaults to "no". An enabled jitterbuffer will
- ; be used only if the sending side can create and the receiving
- ; side can not accept jitter. The skinny channel can accept
- ; jitter, thus a jitterbuffer on the receive skinny side will be
- ; used only if it is forced and enabled.
- ;jbforce = no ; Forces the use of a jitterbuffer on the receive side of a skinny
- ; channel. Defaults to "no".
- ;jbmaxsize = 200 ; Max length of the jitterbuffer in milliseconds.
- ;jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is
- ; resynchronized. Useful to improve the quality of the voice, with
- ; big jumps in/broken timestamps, usually sent from exotic devices
- ; and programs. Defaults to 1000.
- ;jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of a
- ; skinny channel. Two implementations are currently available
- ; - "fixed" (with size always equals to jbmaxsize)
- ; - "adaptive" (with variable size, actually the new jb of IAX2).
- ; Defaults to fixed.
- ;jblog = no ; Enables jitterbuffer frame logging. Defaults to "no".
- ; ----------------------------------------------------------------------------------
- [lines]
- ; ---------------------------------- LINES SECTION --------------------------------
- ; Options set under [lines] apply to all lines unless explicitly set for a particular
- ; device. The options that can be set under lines are specified in GENERAL LINE OPTIONS.
- ; These options can also be set for each individual device as well as those under SPECIFIC
- ; LINE OPTIONS.
- ;
- ; Each label below [lines] in [] is a new line with the specific options specified below
- ; it. Config stops reading new lines when one of the following is found: [general], [devices]
- ; or the end of skinny.conf.
- ;
- ; Where options are common to both lines and devices, the results typically take that of
- ; the least permission. ie if a no is set for either line or device, the call will not be
- ; able to use that permission
- ; ------------------------------- GENERAL LINE OPTIONS -----------------------------
- ;earlyrtp=1 ; whether audio signalling should be provided by asterisk
- ; ; (earlyrtp=1) or device generated (earlyrtp=0). default=yes
- ;transfer=1 ; whether the device is allowed to transfer. default=yes
- ;context=default ; context to use for this line.
- ;callfwdtimeout=20000 ; ms before cfwd_noans occurs (default 20 secs)
- ; ------------------------------ SPECIFIC LINE OPTIONS -----------------------------
- ;setvar= ; allows for the setting of chanvars.
- ; ----------------------------------------------------------------------------------
- ;[100]
- ;nat=yes
- ;callerid="Customer Support" <810-234-1212>
- ; Note: app_voicemail mailboxes must be in the form of mailbox@context.
- ;mailbox=100
- ;vmexten=8500 ; Device level voicemailmain pilot number
- ;regexten=100
- ;context=inbound
- ;linelabel="Support Line" ; Displays next to the line
- ; button on 7940's and 7960s
- ;[110]
- ;callerid="John Chambers" <408-526-4000>
- ;context=did
- ;regexten=110
- ;linelabel="John"
- ;mailbox=110
- ;[120]
- ;Nothing set, so all the defaults are used
- ;[500]
- ;nat=yes
- ;callerid="George W. Bush" <202-456-1414>
- ;setvar=CUSTID=5678 ; Channel variable to be set for all calls from this device
- ;setvar=ATTENDED_TRANSFER_COMPLETE_SOUND=beep ; This channel variable will
- ; cause the given audio file to
- ; be played upon completion of
- ; an attended transfer to the
- ; target of the transfer.
- ;mailbox=500
- ;callwaiting=yes
- ;transfer=yes
- ;threewaycalling=yes
- ;context=default
- ;mohinterpret=default ; This option specifies a default music on hold class to
- ; use when put on hold if the channel's moh class was not
- ; explicitly set with Set(CHANNEL(musicclass)=whatever) and
- ; the peer channel did not suggest a class to use.
- ;mohsuggest=default ; This option specifies which music on hold class to suggest to the peer channel
- ; when this channel places the peer on hold. It may be specified globally or on
- ; a per-user or per-peer basis.
- [devices]
- ; --------------------------------- DEVICES SECTION -------------------------------
- ; Options set under [devices] apply to all devices unless explicitly set for a particular
- ; device. The options that can be set under devices are specified in GENERAL DEVICE OPTIONS.
- ; These options can also be set for each individual device as well as those under SPECIFIC
- ; DEVICE OPTIONS.
- ;
- ; Each label below [devices] in [] is a new device with the specific options specified below
- ; it. Config stop reading new devices when one of the following is found: [general], [lines]
- ; or the end of skinny.conf.
- ;
- ; Where options are common to both lines and devices, the results typically take that of
- ; the least permission. ie if a no is set for either line or device, the call will not be
- ; able to use that permission
- ; ------------------------------ GENERAL DEVICE OPTIONS ----------------------------
- ;earlyrtp=1 ; whether audio signalling should be provided by asterisk
- ; ; (earlyrtp=1) or device generated (earlyrtp=0). default=yes
- ;transfer=1 ; whether the device is allowed to transfer. default=yes
- ; ----------------------------- SPECIFIC DEVICE OPTIONS ----------------------------
- ;device="SEPxxxxxxxxxxxx ; id of the device. Must be set.
- ;version=P002G204 ; firmware version to be loaded. If this version is different
- ; ; to the one on the device, the device will try to load this
- ; ; version from the tftp server. Set to device firmware version.
- ; ----------------------------------------------------------------------------------
- ; Typical config for 12SP+
- ;[florian]
- ;device=SEP00D0BA847E6B
- ;version=P002G204 ; Thanks critch
- ;context=did
- ;directmedia=yes ; Allow media to go directly between two RTP endpoints.
- ;line=120 ; Dial(Skinny/120@florian)
- ; Service URLs attached to line buttons (eg phone directory)
- ; See http://www.voip-info.org/wiki/view/Asterisk+Cisco+79XX+XML+Services
- ; for intro to xml structure.
- ;serviceurl=Directory,http://host/file.xml
- ; Typical config for a 7910
- ;[duba] ; Device name
- ;device=SEP0007EB463101 ; Official identifier
- ;version=P002F202 ; Firmware version identifier
- ;host=192.168.1.144
- ;permit=192.168.0/24 ; Optional, used for authentication
- ;line=500
- ; Typical config for a 7940 with dual 7914s
- ;[support]
- ;device=SEP0007EB463121
- ;line=100
- ;line=110
- ;speeddial => 111,Jack Smith ; Adds a speeddial button to a device.
- ;speeddial => 112@hints,Bob Peterson ; When a context is specified, the speeddial watches a dialplan hint.
- ;addon => 7914
- ;addon => 7914
|
