| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152 |
- ;
- ; Automatically generated from ../channels/chan_oss.c
- ;
- [general]
- ; General config options, with default values shown.
- ; You should use one section per device, with [general] being used
- ; for the first device and also as a template for other devices.
- ;
- ; All but 'debug' can go also in the device-specific sections.
- ;
- ; debug = 0x0 ; misc debug flags, default is 0
- ; Set the device to use for I/O
- ; device = /dev/dsp
- ; Optional mixer command to run upon startup (e.g. to set
- ; volume levels, mutes, etc.
- ; mixer =
- ; Software mic volume booster (or attenuator), useful for sound
- ; cards or microphones with poor sensitivity. The volume level
- ; is in dB, ranging from -20.0 to +20.0
- ; boost = n ; mic volume boost in dB
- ; Set the callerid for outgoing calls
- ; callerid = John Doe <555-1234>
- ; autoanswer = no ; no autoanswer on call
- ; autohangup = yes ; hangup when other party closes
- ; extension = s ; default extension to call
- ; context = default ; default context for outgoing calls
- ; language = "" ; default language
- ; If you set overridecontext to 'yes', then the whole dial string
- ; will be interpreted as an extension, which is extremely useful
- ; to dial SIP, IAX and other extensions which use the '@' character.
- ; The default is 'no' just for backward compatibility, but the
- ; suggestion is to change it.
- ; overridecontext = no ; if 'no', the last @ will start the context
- ; if 'yes' the whole string is an extension.
- ; low level device parameters in case you have problems with the
- ; device driver on your operating system. You should not touch these
- ; unless you know what you are doing.
- ; queuesize = 10 ; frames in device driver
- ; frags = 8 ; argument to SETFRAGMENT
- ; ----------------------------- JITTER BUFFER CONFIGURATION --------------------------
- ; jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of an
- ; OSS channel. Defaults to "no". An enabled jitterbuffer will
- ; be used only if the sending side can create and the receiving
- ; side can not accept jitter. The OSS channel can't accept jitter,
- ; thus an enabled jitterbuffer on the receive OSS side will always
- ; be used if the sending side can create jitter.
- ; jbmaxsize = 200 ; Max length of the jitterbuffer in milliseconds.
- ; jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is
- ; resynchronized. Useful to improve the quality of the voice, with
- ; big jumps in/broken timestamps, usually sent from exotic devices
- ; and programs. Defaults to 1000.
- ; jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of an OSS
- ; channel. Two implementations are currently available - "fixed"
- ; (with size always equals to jbmax-size) and "adaptive" (with
- ; variable size, actually the new jb of IAX2). Defaults to fixed.
- ; jbtargetextra = 40 ; This option only affects the jb when 'jbimpl = adaptive' is set.
- ; The option represents the number of milliseconds by which the new
- ; jitter buffer will pad its size. the default is 40, so without
- ; modification, the new jitter buffer will set its size to the jitter
- ; value plus 40 milliseconds. increasing this value may help if your
- ; network normally has low jitter, but occasionally has spikes.
- ; jblog = no ; Enables jitterbuffer frame logging. Defaults to "no".
- ; ----------------------------------------------------------------------------------
- ; below is an entry for a second console channel
- ; [card1]
- ; device = /dev/dsp1 ; alternate device
- ; Below are the settings to support video. You can include them
- ; in your general configuration as [general](+,video)
- ; The parameters are all available through the CLI as "console name value"
- ; Section names used here are only examples.
- [my_video](!) ; you can just include in your config
- videodevice = /dev/video0 ; uses your V4L webcam as video source
- videodevice = X11 ; X11 grabber. Dragging on the local display moves the origin.
- videocodec = h263 ; also h261, h263p, h264, mpeg4, ...
- ; video_size is the geometry used by the encoder.
- ; Depending on the codec your choice is restricted.
- video_size = 352x288 ; the format WIDTHxHEIGHT is also ok
- video_size = cif ; sqcif, qcif, cif, qvga, vga, ...
- ; You can also set the geometry used for the camera, local display and remote display.
- ; The local window is on the right, the remote window is on the left.
- ; Right clicking with the mouse on a video window increases the size,
- ; center-clicking reduces the size.
- camera_size = cif
- remote_size = cif
- local_size = qcif
- bitrate = 60000 ; rate told to ffmpeg.
- fps = 5 ; frames per second from the source.
- ; qmin = 3 ; quantizer value passed to the encoder.
- ; The keypad is made of an image (in any format supported by SDL_image)
- ; and some configuration entries indicating the location and function of buttons.
- ; These entries can also be contained in the comment field of the image,
- ; which is a lot more convenient to manage.
- ; E.g. for jpeg you can write them with wrjpgcom (part of libjpeg).
- ; The format to define keys is
- ; region = <event> <shape> x0 y0 x1 y1 h
- ; where <event> is the event to be generated (a digit, pickup, hangup,...)
- ; <shape> is the shape of the region (currently 'rect' and 'circle' are
- ; supported, the latter is really an ellipse), x0 y0 x1 y1 are the
- ; coordinates of the base of the rectangle or main diameter of the ellipse,
- ; (they can be rotated) while h is the height of the rectangle or the other
- ; diameter of the ellipse.
- ;
- [my_skin](!)
- keypad = /tmp/keypad.jpg
- region = 1 rect 19 18 67 18 28
- region = 2 rect 84 18 133 18 28
- region = 3 rect 152 18 201 18 28
- region = 4 rect 19 60 67 60 28
- region = 5 rect 84 60 133 60 28
- region = 6 rect 152 60 201 60 28
- region = 7 rect 19 103 67 103 28
- region = 8 rect 84 103 133 103 28
- region = 9 rect 152 103 201 103 28
- region = * rect 19 146 67 146 28
- region = 0 rect 84 146 133 146 28
- region = # rect 152 146 201 146 28
- region = pickup rect 229 15 267 15 40
- region = hangup rect 230 66 270 64 40
- region = mute circle 232 141 264 141 33
- region = sendvideo circle 235 185 266 185 33
- region = autoanswer rect 228 212 275 212 50
- ; another skin with entries for the keypad and a small font
- ; to write to the message boards in the skin.
- [skin2](!)
- keypad = /tmp/kpad2.jpg
- keypad_font = /tmp/font.png
- ; to add video support, uncomment this and remember to install
- ; the keypad and keypad_font files to the right place
- ; [general](+,my_video,skin2)
|
