| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758 |
- Simtec Electronics EB2410ITX (BAST)
- ===================================
- http://www.simtec.co.uk/products/EB2410ITX/
- Introduction
- ------------
- The EB2410ITX is a S3C2410 based development board with a variety of
- peripherals and expansion connectors. This board is also known by
- the shortened name of Bast.
- Configuration
- -------------
- To set the default configuration, use `make bast_defconfig` which
- supports the commonly used features of this board.
- Support
- -------
- Official support information can be found on the Simtec Electronics
- website, at the product page http://www.simtec.co.uk/products/EB2410ITX/
- Useful links:
- - Resources Page http://www.simtec.co.uk/products/EB2410ITX/resources.html
- - Board FAQ at http://www.simtec.co.uk/products/EB2410ITX/faq.html
- - Bootloader info http://www.simtec.co.uk/products/SWABLE/resources.html
- and FAQ http://www.simtec.co.uk/products/SWABLE/faq.html
- MTD
- ---
- The NAND and NOR support has been merged from the linux-mtd project.
- Any problems, see http://www.linux-mtd.infradead.org/ for more
- information or up-to-date versions of linux-mtd.
- IDE
- ---
- Both onboard IDE ports are supported, however there is no support for
- changing speed of devices, PIO Mode 4 capable drives should be used.
- Maintainers
- -----------
- This board is maintained by Simtec Electronics.
- Copyright 2004 Ben Dooks, Simtec Electronics
|
