| 12345678910111213141516171819202122232425 |
- IPMI device
- Required properties:
- - compatible: should be one of ipmi-kcs, ipmi-smic, or ipmi-bt
- - device_type: should be ipmi
- - reg: Address and length of the register set for the device
- Optional properties:
- - interrupts: The interrupt for the device. Without this the interface
- is polled.
- - reg-size - The size of the register. Defaults to 1
- - reg-spacing - The number of bytes between register starts. Defaults to 1
- - reg-shift - The amount to shift the registers to the right to get the data
- into bit zero.
- Example:
- smic@fff3a000 {
- compatible = "ipmi-smic";
- device_type = "ipmi";
- reg = <0xfff3a000 0x1000>;
- interrupts = <0 24 4>;
- reg-size = <4>;
- reg-spacing = <4>;
- };
|
