| 1234567891011121314151617181920212223242526272829303132333435363738 |
- Anatop Voltage regulators
- Required properties:
- - compatible: Must be "fsl,anatop-regulator"
- - anatop-reg-offset: Anatop MFD register offset
- - anatop-vol-bit-shift: Bit shift for the register
- - anatop-vol-bit-width: Number of bits used in the register
- - anatop-min-bit-val: Minimum value of this register
- - anatop-min-voltage: Minimum voltage of this regulator
- - anatop-max-voltage: Maximum voltage of this regulator
- Optional properties:
- - anatop-delay-reg-offset: Anatop MFD step time register offset
- - anatop-delay-bit-shift: Bit shift for the step time register
- - anatop-delay-bit-width: Number of bits used in the step time register
- - vin-supply: The supply for this regulator
- Any property defined as part of the core regulator
- binding, defined in regulator.txt, can also be used.
- Example:
- regulator-vddpu {
- compatible = "fsl,anatop-regulator";
- regulator-name = "vddpu";
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- anatop-reg-offset = <0x140>;
- anatop-vol-bit-shift = <9>;
- anatop-vol-bit-width = <5>;
- anatop-delay-reg-offset = <0x170>;
- anatop-delay-bit-shift = <24>;
- anatop-delay-bit-width = <2>;
- anatop-min-bit-val = <1>;
- anatop-min-voltage = <725000>;
- anatop-max-voltage = <1300000>;
- };
|
