| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172 |
- Options for the ipv6 module are supplied as parameters at load time.
- Module options may be given as command line arguments to the insmod
- or modprobe command, but are usually specified in either
- /etc/modules.d/*.conf configuration files, or in a distro-specific
- configuration file.
- The available ipv6 module parameters are listed below. If a parameter
- is not specified the default value is used.
- The parameters are as follows:
- disable
- Specifies whether to load the IPv6 module, but disable all
- its functionality. This might be used when another module
- has a dependency on the IPv6 module being loaded, but no
- IPv6 addresses or operations are desired.
- The possible values and their effects are:
- 0
- IPv6 is enabled.
- This is the default value.
- 1
- IPv6 is disabled.
- No IPv6 addresses will be added to interfaces, and
- it will not be possible to open an IPv6 socket.
- A reboot is required to enable IPv6.
- autoconf
- Specifies whether to enable IPv6 address autoconfiguration
- on all interfaces. This might be used when one does not wish
- for addresses to be automatically generated from prefixes
- received in Router Advertisements.
- The possible values and their effects are:
- 0
- IPv6 address autoconfiguration is disabled on all interfaces.
- Only the IPv6 loopback address (::1) and link-local addresses
- will be added to interfaces.
- 1
- IPv6 address autoconfiguration is enabled on all interfaces.
- This is the default value.
- disable_ipv6
- Specifies whether to disable IPv6 on all interfaces.
- This might be used when no IPv6 addresses are desired.
- The possible values and their effects are:
- 0
- IPv6 is enabled on all interfaces.
- This is the default value.
- 1
- IPv6 is disabled on all interfaces.
- No IPv6 addresses will be added to interfaces.
|
