123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371 |
- /*
- * Simulated SCSI driver.
- *
- * Copyright (C) 1999, 2001-2003 Hewlett-Packard Co
- * David Mosberger-Tang <davidm@hpl.hp.com>
- * Stephane Eranian <eranian@hpl.hp.com>
- *
- * 02/01/15 David Mosberger Updated for v2.5.1
- * 99/12/18 David Mosberger Added support for READ10/WRITE10 needed by linux v2.3.33
- */
- #include <linux/blkdev.h>
- #include <linux/init.h>
- #include <linux/interrupt.h>
- #include <linux/kernel.h>
- #include <linux/timer.h>
- #include <asm/irq.h>
- #include "hpsim_ssc.h"
- #include <scsi/scsi.h>
- #include <scsi/scsi_cmnd.h>
- #include <scsi/scsi_device.h>
- #include <scsi/scsi_host.h>
- #define DEBUG_SIMSCSI 0
- #define SIMSCSI_REQ_QUEUE_LEN 64
- #define DEFAULT_SIMSCSI_ROOT "/var/ski-disks/sd"
- /* Simulator system calls: */
- #define SSC_OPEN 50
- #define SSC_CLOSE 51
- #define SSC_READ 52
- #define SSC_WRITE 53
- #define SSC_GET_COMPLETION 54
- #define SSC_WAIT_COMPLETION 55
- #define SSC_WRITE_ACCESS 2
- #define SSC_READ_ACCESS 1
- #if DEBUG_SIMSCSI
- int simscsi_debug;
- # define DBG simscsi_debug
- #else
- # define DBG 0
- #endif
- static struct Scsi_Host *host;
- static void simscsi_interrupt (unsigned long val);
- static DECLARE_TASKLET(simscsi_tasklet, simscsi_interrupt, 0);
- struct disk_req {
- unsigned long addr;
- unsigned len;
- };
- struct disk_stat {
- int fd;
- unsigned count;
- };
- static int desc[16] = {
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
- };
- static struct queue_entry {
- struct scsi_cmnd *sc;
- } queue[SIMSCSI_REQ_QUEUE_LEN];
- static int rd, wr;
- static atomic_t num_reqs = ATOMIC_INIT(0);
- /* base name for default disks */
- static char *simscsi_root = DEFAULT_SIMSCSI_ROOT;
- #define MAX_ROOT_LEN 128
- /*
- * used to setup a new base for disk images
- * to use /foo/bar/disk[a-z] as disk images
- * you have to specify simscsi=/foo/bar/disk on the command line
- */
- static int __init
- simscsi_setup (char *s)
- {
- /* XXX Fix me we may need to strcpy() ? */
- if (strlen(s) > MAX_ROOT_LEN) {
- printk(KERN_ERR "simscsi_setup: prefix too long---using default %s\n",
- simscsi_root);
- } else
- simscsi_root = s;
- return 1;
- }
- __setup("simscsi=", simscsi_setup);
- static void
- simscsi_interrupt (unsigned long val)
- {
- struct scsi_cmnd *sc;
- while ((sc = queue[rd].sc) != NULL) {
- atomic_dec(&num_reqs);
- queue[rd].sc = NULL;
- if (DBG)
- printk("simscsi_interrupt: done with %ld\n", sc->serial_number);
- (*sc->scsi_done)(sc);
- rd = (rd + 1) % SIMSCSI_REQ_QUEUE_LEN;
- }
- }
- static int
- simscsi_biosparam (struct scsi_device *sdev, struct block_device *n,
- sector_t capacity, int ip[])
- {
- ip[0] = 64; /* heads */
- ip[1] = 32; /* sectors */
- ip[2] = capacity >> 11; /* cylinders */
- return 0;
- }
- static void
- simscsi_sg_readwrite (struct scsi_cmnd *sc, int mode, unsigned long offset)
- {
- int i;
- struct scatterlist *sl;
- struct disk_stat stat;
- struct disk_req req;
- stat.fd = desc[sc->device->id];
- scsi_for_each_sg(sc, sl, scsi_sg_count(sc), i) {
- req.addr = __pa(sg_virt(sl));
- req.len = sl->length;
- if (DBG)
- printk("simscsi_sg_%s @ %lx (off %lx) use_sg=%d len=%d\n",
- mode == SSC_READ ? "read":"write", req.addr, offset,
- scsi_sg_count(sc) - i, sl->length);
- ia64_ssc(stat.fd, 1, __pa(&req), offset, mode);
- ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION);
- /* should not happen in our case */
- if (stat.count != req.len) {
- sc->result = DID_ERROR << 16;
- return;
- }
- offset += sl->length;
- }
- sc->result = GOOD;
- }
- /*
- * function handling both READ_6/WRITE_6 (non-scatter/gather mode)
- * commands.
- * Added 02/26/99 S.Eranian
- */
- static void
- simscsi_readwrite6 (struct scsi_cmnd *sc, int mode)
- {
- unsigned long offset;
- offset = (((sc->cmnd[1] & 0x1f) << 16) | (sc->cmnd[2] << 8) | sc->cmnd[3])*512;
- simscsi_sg_readwrite(sc, mode, offset);
- }
- static size_t
- simscsi_get_disk_size (int fd)
- {
- struct disk_stat stat;
- size_t bit, sectors = 0;
- struct disk_req req;
- char buf[512];
- /*
- * This is a bit kludgey: the simulator doesn't provide a
- * direct way of determining the disk size, so we do a binary
- * search, assuming a maximum disk size of 128GB.
- */
- for (bit = (128UL << 30)/512; bit != 0; bit >>= 1) {
- req.addr = __pa(&buf);
- req.len = sizeof(buf);
- ia64_ssc(fd, 1, __pa(&req), ((sectors | bit) - 1)*512, SSC_READ);
- stat.fd = fd;
- ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION);
- if (stat.count == sizeof(buf))
- sectors |= bit;
- }
- return sectors - 1; /* return last valid sector number */
- }
- static void
- simscsi_readwrite10 (struct scsi_cmnd *sc, int mode)
- {
- unsigned long offset;
- offset = (((unsigned long)sc->cmnd[2] << 24)
- | ((unsigned long)sc->cmnd[3] << 16)
- | ((unsigned long)sc->cmnd[4] << 8)
- | ((unsigned long)sc->cmnd[5] << 0))*512UL;
- simscsi_sg_readwrite(sc, mode, offset);
- }
- static int
- simscsi_queuecommand_lck (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
- {
- unsigned int target_id = sc->device->id;
- char fname[MAX_ROOT_LEN+16];
- size_t disk_size;
- char *buf;
- char localbuf[36];
- #if DEBUG_SIMSCSI
- register long sp asm ("sp");
- if (DBG)
- printk("simscsi_queuecommand: target=%d,cmnd=%u,sc=%lu,sp=%lx,done=%p\n",
- target_id, sc->cmnd[0], sc->serial_number, sp, done);
- #endif
- sc->result = DID_BAD_TARGET << 16;
- sc->scsi_done = done;
- if (target_id <= 15 && sc->device->lun == 0) {
- switch (sc->cmnd[0]) {
- case INQUIRY:
- if (scsi_bufflen(sc) < 35) {
- break;
- }
- sprintf (fname, "%s%c", simscsi_root, 'a' + target_id);
- desc[target_id] = ia64_ssc(__pa(fname), SSC_READ_ACCESS|SSC_WRITE_ACCESS,
- 0, 0, SSC_OPEN);
- if (desc[target_id] < 0) {
- /* disk doesn't exist... */
- break;
- }
- buf = localbuf;
- buf[0] = 0; /* magnetic disk */
- buf[1] = 0; /* not a removable medium */
- buf[2] = 2; /* SCSI-2 compliant device */
- buf[3] = 2; /* SCSI-2 response data format */
- buf[4] = 31; /* additional length (bytes) */
- buf[5] = 0; /* reserved */
- buf[6] = 0; /* reserved */
- buf[7] = 0; /* various flags */
- memcpy(buf + 8, "HP SIMULATED DISK 0.00", 28);
- scsi_sg_copy_from_buffer(sc, buf, 36);
- sc->result = GOOD;
- break;
- case TEST_UNIT_READY:
- sc->result = GOOD;
- break;
- case READ_6:
- if (desc[target_id] < 0 )
- break;
- simscsi_readwrite6(sc, SSC_READ);
- break;
- case READ_10:
- if (desc[target_id] < 0 )
- break;
- simscsi_readwrite10(sc, SSC_READ);
- break;
- case WRITE_6:
- if (desc[target_id] < 0)
- break;
- simscsi_readwrite6(sc, SSC_WRITE);
- break;
- case WRITE_10:
- if (desc[target_id] < 0)
- break;
- simscsi_readwrite10(sc, SSC_WRITE);
- break;
- case READ_CAPACITY:
- if (desc[target_id] < 0 || scsi_bufflen(sc) < 8) {
- break;
- }
- buf = localbuf;
- disk_size = simscsi_get_disk_size(desc[target_id]);
- buf[0] = (disk_size >> 24) & 0xff;
- buf[1] = (disk_size >> 16) & 0xff;
- buf[2] = (disk_size >> 8) & 0xff;
- buf[3] = (disk_size >> 0) & 0xff;
- /* set block size of 512 bytes: */
- buf[4] = 0;
- buf[5] = 0;
- buf[6] = 2;
- buf[7] = 0;
- scsi_sg_copy_from_buffer(sc, buf, 8);
- sc->result = GOOD;
- break;
- case MODE_SENSE:
- case MODE_SENSE_10:
- /* sd.c uses this to determine whether disk does write-caching. */
- scsi_sg_copy_from_buffer(sc, (char *)empty_zero_page,
- PAGE_SIZE);
- sc->result = GOOD;
- break;
- case START_STOP:
- printk(KERN_ERR "START_STOP\n");
- break;
- default:
- panic("simscsi: unknown SCSI command %u\n", sc->cmnd[0]);
- }
- }
- if (sc->result == DID_BAD_TARGET) {
- sc->result |= DRIVER_SENSE << 24;
- sc->sense_buffer[0] = 0x70;
- sc->sense_buffer[2] = 0x00;
- }
- if (atomic_read(&num_reqs) >= SIMSCSI_REQ_QUEUE_LEN) {
- panic("Attempt to queue command while command is pending!!");
- }
- atomic_inc(&num_reqs);
- queue[wr].sc = sc;
- wr = (wr + 1) % SIMSCSI_REQ_QUEUE_LEN;
- tasklet_schedule(&simscsi_tasklet);
- return 0;
- }
- static DEF_SCSI_QCMD(simscsi_queuecommand)
- static int
- simscsi_host_reset (struct scsi_cmnd *sc)
- {
- printk(KERN_ERR "simscsi_host_reset: not implemented\n");
- return 0;
- }
- static struct scsi_host_template driver_template = {
- .name = "simulated SCSI host adapter",
- .proc_name = "simscsi",
- .queuecommand = simscsi_queuecommand,
- .eh_host_reset_handler = simscsi_host_reset,
- .bios_param = simscsi_biosparam,
- .can_queue = SIMSCSI_REQ_QUEUE_LEN,
- .this_id = -1,
- .sg_tablesize = SG_ALL,
- .max_sectors = 1024,
- .cmd_per_lun = SIMSCSI_REQ_QUEUE_LEN,
- .use_clustering = DISABLE_CLUSTERING,
- };
- static int __init
- simscsi_init(void)
- {
- int error;
- host = scsi_host_alloc(&driver_template, 0);
- if (!host)
- return -ENOMEM;
- error = scsi_add_host(host, NULL);
- if (error)
- goto free_host;
- scsi_scan_host(host);
- return 0;
- free_host:
- scsi_host_put(host);
- return error;
- }
- device_initcall(simscsi_init);
|