123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405 |
- /*
- * System Abstraction Layer (SAL) interface routines.
- *
- * Copyright (C) 1998, 1999, 2001, 2003 Hewlett-Packard Co
- * David Mosberger-Tang <davidm@hpl.hp.com>
- * Copyright (C) 1999 VA Linux Systems
- * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
- */
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/module.h>
- #include <linux/spinlock.h>
- #include <linux/string.h>
- #include <asm/delay.h>
- #include <asm/page.h>
- #include <asm/sal.h>
- #include <asm/pal.h>
- __cacheline_aligned DEFINE_SPINLOCK(sal_lock);
- unsigned long sal_platform_features;
- unsigned short sal_revision;
- unsigned short sal_version;
- #define SAL_MAJOR(x) ((x) >> 8)
- #define SAL_MINOR(x) ((x) & 0xff)
- static struct {
- void *addr; /* function entry point */
- void *gpval; /* gp value to use */
- } pdesc;
- static long
- default_handler (void)
- {
- return -1;
- }
- ia64_sal_handler ia64_sal = (ia64_sal_handler) default_handler;
- ia64_sal_desc_ptc_t *ia64_ptc_domain_info;
- const char *
- ia64_sal_strerror (long status)
- {
- const char *str;
- switch (status) {
- case 0: str = "Call completed without error"; break;
- case 1: str = "Effect a warm boot of the system to complete "
- "the update"; break;
- case -1: str = "Not implemented"; break;
- case -2: str = "Invalid argument"; break;
- case -3: str = "Call completed with error"; break;
- case -4: str = "Virtual address not registered"; break;
- case -5: str = "No information available"; break;
- case -6: str = "Insufficient space to add the entry"; break;
- case -7: str = "Invalid entry_addr value"; break;
- case -8: str = "Invalid interrupt vector"; break;
- case -9: str = "Requested memory not available"; break;
- case -10: str = "Unable to write to the NVM device"; break;
- case -11: str = "Invalid partition type specified"; break;
- case -12: str = "Invalid NVM_Object id specified"; break;
- case -13: str = "NVM_Object already has the maximum number "
- "of partitions"; break;
- case -14: str = "Insufficient space in partition for the "
- "requested write sub-function"; break;
- case -15: str = "Insufficient data buffer space for the "
- "requested read record sub-function"; break;
- case -16: str = "Scratch buffer required for the write/delete "
- "sub-function"; break;
- case -17: str = "Insufficient space in the NVM_Object for the "
- "requested create sub-function"; break;
- case -18: str = "Invalid value specified in the partition_rec "
- "argument"; break;
- case -19: str = "Record oriented I/O not supported for this "
- "partition"; break;
- case -20: str = "Bad format of record to be written or "
- "required keyword variable not "
- "specified"; break;
- default: str = "Unknown SAL status code"; break;
- }
- return str;
- }
- void __init
- ia64_sal_handler_init (void *entry_point, void *gpval)
- {
- /* fill in the SAL procedure descriptor and point ia64_sal to it: */
- pdesc.addr = entry_point;
- pdesc.gpval = gpval;
- ia64_sal = (ia64_sal_handler) &pdesc;
- }
- static void __init
- check_versions (struct ia64_sal_systab *systab)
- {
- sal_revision = (systab->sal_rev_major << 8) | systab->sal_rev_minor;
- sal_version = (systab->sal_b_rev_major << 8) | systab->sal_b_rev_minor;
- /* Check for broken firmware */
- if ((sal_revision == SAL_VERSION_CODE(49, 29))
- && (sal_version == SAL_VERSION_CODE(49, 29)))
- {
- /*
- * Old firmware for zx2000 prototypes have this weird version number,
- * reset it to something sane.
- */
- sal_revision = SAL_VERSION_CODE(2, 8);
- sal_version = SAL_VERSION_CODE(0, 0);
- }
- if (ia64_platform_is("sn2") && (sal_revision == SAL_VERSION_CODE(2, 9)))
- /*
- * SGI Altix has hard-coded version 2.9 in their prom
- * but they actually implement 3.2, so let's fix it here.
- */
- sal_revision = SAL_VERSION_CODE(3, 2);
- }
- static void __init
- sal_desc_entry_point (void *p)
- {
- struct ia64_sal_desc_entry_point *ep = p;
- ia64_pal_handler_init(__va(ep->pal_proc));
- ia64_sal_handler_init(__va(ep->sal_proc), __va(ep->gp));
- }
- #ifdef CONFIG_SMP
- static void __init
- set_smp_redirect (int flag)
- {
- #ifndef CONFIG_HOTPLUG_CPU
- if (no_int_routing)
- smp_int_redirect &= ~flag;
- else
- smp_int_redirect |= flag;
- #else
- /*
- * For CPU Hotplug we dont want to do any chipset supported
- * interrupt redirection. The reason is this would require that
- * All interrupts be stopped and hard bind the irq to a cpu.
- * Later when the interrupt is fired we need to set the redir hint
- * on again in the vector. This is cumbersome for something that the
- * user mode irq balancer will solve anyways.
- */
- no_int_routing=1;
- smp_int_redirect &= ~flag;
- #endif
- }
- #else
- #define set_smp_redirect(flag) do { } while (0)
- #endif
- static void __init
- sal_desc_platform_feature (void *p)
- {
- struct ia64_sal_desc_platform_feature *pf = p;
- sal_platform_features = pf->feature_mask;
- printk(KERN_INFO "SAL Platform features:");
- if (!sal_platform_features) {
- printk(" None\n");
- return;
- }
- if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_BUS_LOCK)
- printk(" BusLock");
- if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT) {
- printk(" IRQ_Redirection");
- set_smp_redirect(SMP_IRQ_REDIRECTION);
- }
- if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT) {
- printk(" IPI_Redirection");
- set_smp_redirect(SMP_IPI_REDIRECTION);
- }
- if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT)
- printk(" ITC_Drift");
- printk("\n");
- }
- #ifdef CONFIG_SMP
- static void __init
- sal_desc_ap_wakeup (void *p)
- {
- struct ia64_sal_desc_ap_wakeup *ap = p;
- switch (ap->mechanism) {
- case IA64_SAL_AP_EXTERNAL_INT:
- ap_wakeup_vector = ap->vector;
- printk(KERN_INFO "SAL: AP wakeup using external interrupt "
- "vector 0x%lx\n", ap_wakeup_vector);
- break;
- default:
- printk(KERN_ERR "SAL: AP wakeup mechanism unsupported!\n");
- break;
- }
- }
- static void __init
- chk_nointroute_opt(void)
- {
- char *cp;
- for (cp = boot_command_line; *cp; ) {
- if (memcmp(cp, "nointroute", 10) == 0) {
- no_int_routing = 1;
- printk ("no_int_routing on\n");
- break;
- } else {
- while (*cp != ' ' && *cp)
- ++cp;
- while (*cp == ' ')
- ++cp;
- }
- }
- }
- #else
- static void __init sal_desc_ap_wakeup(void *p) { }
- #endif
- /*
- * HP rx5670 firmware polls for interrupts during SAL_CACHE_FLUSH by reading
- * cr.ivr, but it never writes cr.eoi. This leaves any interrupt marked as
- * "in-service" and masks other interrupts of equal or lower priority.
- *
- * HP internal defect reports: F1859, F2775, F3031.
- */
- static int sal_cache_flush_drops_interrupts;
- static int __init
- force_pal_cache_flush(char *str)
- {
- sal_cache_flush_drops_interrupts = 1;
- return 0;
- }
- early_param("force_pal_cache_flush", force_pal_cache_flush);
- void __init
- check_sal_cache_flush (void)
- {
- unsigned long flags;
- int cpu;
- u64 vector, cache_type = 3;
- struct ia64_sal_retval isrv;
- if (sal_cache_flush_drops_interrupts)
- return;
- cpu = get_cpu();
- local_irq_save(flags);
- /*
- * Send ourselves a timer interrupt, wait until it's reported, and see
- * if SAL_CACHE_FLUSH drops it.
- */
- platform_send_ipi(cpu, IA64_TIMER_VECTOR, IA64_IPI_DM_INT, 0);
- while (!ia64_get_irr(IA64_TIMER_VECTOR))
- cpu_relax();
- SAL_CALL(isrv, SAL_CACHE_FLUSH, cache_type, 0, 0, 0, 0, 0, 0);
- if (isrv.status)
- printk(KERN_ERR "SAL_CAL_FLUSH failed with %ld\n", isrv.status);
- if (ia64_get_irr(IA64_TIMER_VECTOR)) {
- vector = ia64_get_ivr();
- ia64_eoi();
- WARN_ON(vector != IA64_TIMER_VECTOR);
- } else {
- sal_cache_flush_drops_interrupts = 1;
- printk(KERN_ERR "SAL: SAL_CACHE_FLUSH drops interrupts; "
- "PAL_CACHE_FLUSH will be used instead\n");
- ia64_eoi();
- }
- local_irq_restore(flags);
- put_cpu();
- }
- s64
- ia64_sal_cache_flush (u64 cache_type)
- {
- struct ia64_sal_retval isrv;
- if (sal_cache_flush_drops_interrupts) {
- unsigned long flags;
- u64 progress;
- s64 rc;
- progress = 0;
- local_irq_save(flags);
- rc = ia64_pal_cache_flush(cache_type,
- PAL_CACHE_FLUSH_INVALIDATE, &progress, NULL);
- local_irq_restore(flags);
- return rc;
- }
- SAL_CALL(isrv, SAL_CACHE_FLUSH, cache_type, 0, 0, 0, 0, 0, 0);
- return isrv.status;
- }
- EXPORT_SYMBOL_GPL(ia64_sal_cache_flush);
- void __init
- ia64_sal_init (struct ia64_sal_systab *systab)
- {
- char *p;
- int i;
- if (!systab) {
- printk(KERN_WARNING "Hmm, no SAL System Table.\n");
- return;
- }
- if (strncmp(systab->signature, "SST_", 4) != 0)
- printk(KERN_ERR "bad signature in system table!");
- check_versions(systab);
- #ifdef CONFIG_SMP
- chk_nointroute_opt();
- #endif
- /* revisions are coded in BCD, so %x does the job for us */
- printk(KERN_INFO "SAL %x.%x: %.32s %.32s%sversion %x.%x\n",
- SAL_MAJOR(sal_revision), SAL_MINOR(sal_revision),
- systab->oem_id, systab->product_id,
- systab->product_id[0] ? " " : "",
- SAL_MAJOR(sal_version), SAL_MINOR(sal_version));
- p = (char *) (systab + 1);
- for (i = 0; i < systab->entry_count; i++) {
- /*
- * The first byte of each entry type contains the type
- * descriptor.
- */
- switch (*p) {
- case SAL_DESC_ENTRY_POINT:
- sal_desc_entry_point(p);
- break;
- case SAL_DESC_PLATFORM_FEATURE:
- sal_desc_platform_feature(p);
- break;
- case SAL_DESC_PTC:
- ia64_ptc_domain_info = (ia64_sal_desc_ptc_t *)p;
- break;
- case SAL_DESC_AP_WAKEUP:
- sal_desc_ap_wakeup(p);
- break;
- }
- p += SAL_DESC_SIZE(*p);
- }
- }
- int
- ia64_sal_oemcall(struct ia64_sal_retval *isrvp, u64 oemfunc, u64 arg1,
- u64 arg2, u64 arg3, u64 arg4, u64 arg5, u64 arg6, u64 arg7)
- {
- if (oemfunc < IA64_SAL_OEMFUNC_MIN || oemfunc > IA64_SAL_OEMFUNC_MAX)
- return -1;
- SAL_CALL(*isrvp, oemfunc, arg1, arg2, arg3, arg4, arg5, arg6, arg7);
- return 0;
- }
- EXPORT_SYMBOL(ia64_sal_oemcall);
- int
- ia64_sal_oemcall_nolock(struct ia64_sal_retval *isrvp, u64 oemfunc, u64 arg1,
- u64 arg2, u64 arg3, u64 arg4, u64 arg5, u64 arg6,
- u64 arg7)
- {
- if (oemfunc < IA64_SAL_OEMFUNC_MIN || oemfunc > IA64_SAL_OEMFUNC_MAX)
- return -1;
- SAL_CALL_NOLOCK(*isrvp, oemfunc, arg1, arg2, arg3, arg4, arg5, arg6,
- arg7);
- return 0;
- }
- EXPORT_SYMBOL(ia64_sal_oemcall_nolock);
- int
- ia64_sal_oemcall_reentrant(struct ia64_sal_retval *isrvp, u64 oemfunc,
- u64 arg1, u64 arg2, u64 arg3, u64 arg4, u64 arg5,
- u64 arg6, u64 arg7)
- {
- if (oemfunc < IA64_SAL_OEMFUNC_MIN || oemfunc > IA64_SAL_OEMFUNC_MAX)
- return -1;
- SAL_CALL_REENTRANT(*isrvp, oemfunc, arg1, arg2, arg3, arg4, arg5, arg6,
- arg7);
- return 0;
- }
- EXPORT_SYMBOL(ia64_sal_oemcall_reentrant);
- long
- ia64_sal_freq_base (unsigned long which, unsigned long *ticks_per_second,
- unsigned long *drift_info)
- {
- struct ia64_sal_retval isrv;
- SAL_CALL(isrv, SAL_FREQ_BASE, which, 0, 0, 0, 0, 0, 0);
- *ticks_per_second = isrv.v0;
- *drift_info = isrv.v1;
- return isrv.status;
- }
- EXPORT_SYMBOL_GPL(ia64_sal_freq_base);
|