123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104 |
- /*
- * pci.c -- basic PCI support code
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * (C) Copyright 2011, Greg Ungerer <gerg@uclinux.org>
- */
- #include <linux/kernel.h>
- #include <linux/types.h>
- #include <linux/mm.h>
- #include <linux/init.h>
- #include <linux/pci.h>
- /*
- * From arch/i386/kernel/pci-i386.c:
- *
- * We need to avoid collisions with `mirrored' VGA ports
- * and other strange ISA hardware, so we always want the
- * addresses to be allocated in the 0x000-0x0ff region
- * modulo 0x400.
- *
- * Why? Because some silly external IO cards only decode
- * the low 10 bits of the IO address. The 0x00-0xff region
- * is reserved for motherboard devices that decode all 16
- * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
- * but we want to try to avoid allocating at 0x2900-0x2bff
- * which might be mirrored at 0x0100-0x03ff..
- */
- resource_size_t pcibios_align_resource(void *data, const struct resource *res,
- resource_size_t size, resource_size_t align)
- {
- resource_size_t start = res->start;
- if ((res->flags & IORESOURCE_IO) && (start & 0x300))
- start = (start + 0x3ff) & ~0x3ff;
- start = (start + align - 1) & ~(align - 1);
- return start;
- }
- /*
- * This is taken from the ARM code for this.
- */
- int pcibios_enable_device(struct pci_dev *dev, int mask)
- {
- struct resource *r;
- u16 cmd, newcmd;
- int idx;
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- newcmd = cmd;
- for (idx = 0; idx < 6; idx++) {
- /* Only set up the requested stuff */
- if (!(mask & (1 << idx)))
- continue;
- r = dev->resource + idx;
- if (!r->start && r->end) {
- pr_err("PCI: Device %s not available because of resource collisions\n",
- pci_name(dev));
- return -EINVAL;
- }
- if (r->flags & IORESOURCE_IO)
- newcmd |= PCI_COMMAND_IO;
- if (r->flags & IORESOURCE_MEM)
- newcmd |= PCI_COMMAND_MEMORY;
- }
- /*
- * Bridges (eg, cardbus bridges) need to be fully enabled
- */
- if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
- newcmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
- if (newcmd != cmd) {
- pr_info("PCI: enabling device %s (0x%04x -> 0x%04x)\n",
- pci_name(dev), cmd, newcmd);
- pci_write_config_word(dev, PCI_COMMAND, newcmd);
- }
- return 0;
- }
- void pcibios_fixup_bus(struct pci_bus *bus)
- {
- struct pci_dev *dev;
- list_for_each_entry(dev, &bus->devices, bus_list) {
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8);
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 32);
- }
- }
- char *pcibios_setup(char *str)
- {
- return str;
- }
|