pci-lantiq.c 7.2 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255
  1. /*
  2. * This program is free software; you can redistribute it and/or modify it
  3. * under the terms of the GNU General Public License version 2 as published
  4. * by the Free Software Foundation.
  5. *
  6. * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
  7. */
  8. #include <linux/types.h>
  9. #include <linux/pci.h>
  10. #include <linux/kernel.h>
  11. #include <linux/init.h>
  12. #include <linux/delay.h>
  13. #include <linux/mm.h>
  14. #include <linux/vmalloc.h>
  15. #include <linux/module.h>
  16. #include <linux/clk.h>
  17. #include <linux/of_platform.h>
  18. #include <linux/of_gpio.h>
  19. #include <linux/of_irq.h>
  20. #include <linux/of_pci.h>
  21. #include <asm/addrspace.h>
  22. #include <lantiq_soc.h>
  23. #include <lantiq_irq.h>
  24. #include "pci-lantiq.h"
  25. #define PCI_CR_FCI_ADDR_MAP0 0x00C0
  26. #define PCI_CR_FCI_ADDR_MAP1 0x00C4
  27. #define PCI_CR_FCI_ADDR_MAP2 0x00C8
  28. #define PCI_CR_FCI_ADDR_MAP3 0x00CC
  29. #define PCI_CR_FCI_ADDR_MAP4 0x00D0
  30. #define PCI_CR_FCI_ADDR_MAP5 0x00D4
  31. #define PCI_CR_FCI_ADDR_MAP6 0x00D8
  32. #define PCI_CR_FCI_ADDR_MAP7 0x00DC
  33. #define PCI_CR_CLK_CTRL 0x0000
  34. #define PCI_CR_PCI_MOD 0x0030
  35. #define PCI_CR_PC_ARB 0x0080
  36. #define PCI_CR_FCI_ADDR_MAP11hg 0x00E4
  37. #define PCI_CR_BAR11MASK 0x0044
  38. #define PCI_CR_BAR12MASK 0x0048
  39. #define PCI_CR_BAR13MASK 0x004C
  40. #define PCI_CS_BASE_ADDR1 0x0010
  41. #define PCI_CR_PCI_ADDR_MAP11 0x0064
  42. #define PCI_CR_FCI_BURST_LENGTH 0x00E8
  43. #define PCI_CR_PCI_EOI 0x002C
  44. #define PCI_CS_STS_CMD 0x0004
  45. #define PCI_MASTER0_REQ_MASK_2BITS 8
  46. #define PCI_MASTER1_REQ_MASK_2BITS 10
  47. #define PCI_MASTER2_REQ_MASK_2BITS 12
  48. #define INTERNAL_ARB_ENABLE_BIT 0
  49. #define LTQ_CGU_IFCCR 0x0018
  50. #define LTQ_CGU_PCICR 0x0034
  51. #define ltq_pci_w32(x, y) ltq_w32((x), ltq_pci_membase + (y))
  52. #define ltq_pci_r32(x) ltq_r32(ltq_pci_membase + (x))
  53. #define ltq_pci_cfg_w32(x, y) ltq_w32((x), ltq_pci_mapped_cfg + (y))
  54. #define ltq_pci_cfg_r32(x) ltq_r32(ltq_pci_mapped_cfg + (x))
  55. __iomem void *ltq_pci_mapped_cfg;
  56. static __iomem void *ltq_pci_membase;
  57. static int reset_gpio;
  58. static struct clk *clk_pci, *clk_external;
  59. static struct resource pci_io_resource;
  60. static struct resource pci_mem_resource;
  61. static struct pci_ops pci_ops = {
  62. .read = ltq_pci_read_config_dword,
  63. .write = ltq_pci_write_config_dword
  64. };
  65. static struct pci_controller pci_controller = {
  66. .pci_ops = &pci_ops,
  67. .mem_resource = &pci_mem_resource,
  68. .mem_offset = 0x00000000UL,
  69. .io_resource = &pci_io_resource,
  70. .io_offset = 0x00000000UL,
  71. };
  72. static inline u32 ltq_calc_bar11mask(void)
  73. {
  74. u32 mem, bar11mask;
  75. /* BAR11MASK value depends on available memory on system. */
  76. mem = get_num_physpages() * PAGE_SIZE;
  77. bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) - 1)) - 1)) | 8;
  78. return bar11mask;
  79. }
  80. static int ltq_pci_startup(struct platform_device *pdev)
  81. {
  82. struct device_node *node = pdev->dev.of_node;
  83. const __be32 *req_mask, *bus_clk;
  84. u32 temp_buffer;
  85. /* get our clocks */
  86. clk_pci = clk_get(&pdev->dev, NULL);
  87. if (IS_ERR(clk_pci)) {
  88. dev_err(&pdev->dev, "failed to get pci clock\n");
  89. return PTR_ERR(clk_pci);
  90. }
  91. clk_external = clk_get(&pdev->dev, "external");
  92. if (IS_ERR(clk_external)) {
  93. clk_put(clk_pci);
  94. dev_err(&pdev->dev, "failed to get external pci clock\n");
  95. return PTR_ERR(clk_external);
  96. }
  97. /* read the bus speed that we want */
  98. bus_clk = of_get_property(node, "lantiq,bus-clock", NULL);
  99. if (bus_clk)
  100. clk_set_rate(clk_pci, *bus_clk);
  101. /* and enable the clocks */
  102. clk_enable(clk_pci);
  103. if (of_find_property(node, "lantiq,external-clock", NULL))
  104. clk_enable(clk_external);
  105. else
  106. clk_disable(clk_external);
  107. /* setup reset gpio used by pci */
  108. reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
  109. if (gpio_is_valid(reset_gpio)) {
  110. int ret = devm_gpio_request(&pdev->dev,
  111. reset_gpio, "pci-reset");
  112. if (ret) {
  113. dev_err(&pdev->dev,
  114. "failed to request gpio %d\n", reset_gpio);
  115. return ret;
  116. }
  117. gpio_direction_output(reset_gpio, 1);
  118. }
  119. /* enable auto-switching between PCI and EBU */
  120. ltq_pci_w32(0xa, PCI_CR_CLK_CTRL);
  121. /* busy, i.e. configuration is not done, PCI access has to be retried */
  122. ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD);
  123. wmb();
  124. /* BUS Master/IO/MEM access */
  125. ltq_pci_cfg_w32(ltq_pci_cfg_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD);
  126. /* enable external 2 PCI masters */
  127. temp_buffer = ltq_pci_r32(PCI_CR_PC_ARB);
  128. /* setup the request mask */
  129. req_mask = of_get_property(node, "req-mask", NULL);
  130. if (req_mask)
  131. temp_buffer &= ~((*req_mask & 0xf) << 16);
  132. else
  133. temp_buffer &= ~0xf0000;
  134. /* enable internal arbiter */
  135. temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
  136. /* enable internal PCI master reqest */
  137. temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS));
  138. /* enable EBU request */
  139. temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS));
  140. /* enable all external masters request */
  141. temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS));
  142. ltq_pci_w32(temp_buffer, PCI_CR_PC_ARB);
  143. wmb();
  144. /* setup BAR memory regions */
  145. ltq_pci_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0);
  146. ltq_pci_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1);
  147. ltq_pci_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2);
  148. ltq_pci_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3);
  149. ltq_pci_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4);
  150. ltq_pci_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5);
  151. ltq_pci_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6);
  152. ltq_pci_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7);
  153. ltq_pci_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg);
  154. ltq_pci_w32(ltq_calc_bar11mask(), PCI_CR_BAR11MASK);
  155. ltq_pci_w32(0, PCI_CR_PCI_ADDR_MAP11);
  156. ltq_pci_w32(0, PCI_CS_BASE_ADDR1);
  157. /* both TX and RX endian swap are enabled */
  158. ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI);
  159. wmb();
  160. ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR12MASK) | 0x80000000,
  161. PCI_CR_BAR12MASK);
  162. ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR13MASK) | 0x80000000,
  163. PCI_CR_BAR13MASK);
  164. /*use 8 dw burst length */
  165. ltq_pci_w32(0x303, PCI_CR_FCI_BURST_LENGTH);
  166. ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD);
  167. wmb();
  168. /* setup irq line */
  169. ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_CON) | 0xc, LTQ_EBU_PCC_CON);
  170. ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN);
  171. /* toggle reset pin */
  172. if (gpio_is_valid(reset_gpio)) {
  173. __gpio_set_value(reset_gpio, 0);
  174. wmb();
  175. mdelay(1);
  176. __gpio_set_value(reset_gpio, 1);
  177. }
  178. return 0;
  179. }
  180. static int ltq_pci_probe(struct platform_device *pdev)
  181. {
  182. struct resource *res_cfg, *res_bridge;
  183. pci_clear_flags(PCI_PROBE_ONLY);
  184. res_bridge = platform_get_resource(pdev, IORESOURCE_MEM, 1);
  185. ltq_pci_membase = devm_ioremap_resource(&pdev->dev, res_bridge);
  186. if (IS_ERR(ltq_pci_membase))
  187. return PTR_ERR(ltq_pci_membase);
  188. res_cfg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
  189. ltq_pci_mapped_cfg = devm_ioremap_resource(&pdev->dev, res_cfg);
  190. if (IS_ERR(ltq_pci_mapped_cfg))
  191. return PTR_ERR(ltq_pci_mapped_cfg);
  192. ltq_pci_startup(pdev);
  193. pci_load_of_ranges(&pci_controller, pdev->dev.of_node);
  194. register_pci_controller(&pci_controller);
  195. return 0;
  196. }
  197. static const struct of_device_id ltq_pci_match[] = {
  198. { .compatible = "lantiq,pci-xway" },
  199. {},
  200. };
  201. MODULE_DEVICE_TABLE(of, ltq_pci_match);
  202. static struct platform_driver ltq_pci_driver = {
  203. .probe = ltq_pci_probe,
  204. .driver = {
  205. .name = "pci-xway",
  206. .of_match_table = ltq_pci_match,
  207. },
  208. };
  209. int __init pcibios_init(void)
  210. {
  211. int ret = platform_driver_register(&ltq_pci_driver);
  212. if (ret)
  213. pr_info("pci-xway: Error registering platform driver!");
  214. return ret;
  215. }
  216. arch_initcall(pcibios_init);