123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107 |
- /*
- * pata_netcell.c - Netcell PATA driver
- *
- * (c) 2006 Red Hat
- */
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/pci.h>
- #include <linux/blkdev.h>
- #include <linux/delay.h>
- #include <linux/device.h>
- #include <scsi/scsi_host.h>
- #include <linux/libata.h>
- #include <linux/ata.h>
- #define DRV_NAME "pata_netcell"
- #define DRV_VERSION "0.1.7"
- /* No PIO or DMA methods needed for this device */
- static unsigned int netcell_read_id(struct ata_device *adev,
- struct ata_taskfile *tf, u16 *id)
- {
- unsigned int err_mask = ata_do_dev_read_id(adev, tf, id);
- /* Firmware forgets to mark words 85-87 valid */
- if (err_mask == 0)
- id[ATA_ID_CSF_DEFAULT] |= 0x4000;
- return err_mask;
- }
- static struct scsi_host_template netcell_sht = {
- ATA_BMDMA_SHT(DRV_NAME),
- };
- static struct ata_port_operations netcell_ops = {
- .inherits = &ata_bmdma_port_ops,
- .cable_detect = ata_cable_80wire,
- .read_id = netcell_read_id,
- };
- /**
- * netcell_init_one - Register Netcell ATA PCI device with kernel services
- * @pdev: PCI device to register
- * @ent: Entry in netcell_pci_tbl matching with @pdev
- *
- * Called from kernel PCI layer.
- *
- * LOCKING:
- * Inherited from PCI layer (may sleep).
- *
- * RETURNS:
- * Zero on success, or -ERRNO value.
- */
- static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
- {
- static const struct ata_port_info info = {
- .flags = ATA_FLAG_SLAVE_POSS,
- /* Actually we don't really care about these as the
- firmware deals with it */
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5, /* UDMA 133 */
- .port_ops = &netcell_ops,
- };
- const struct ata_port_info *port_info[] = { &info, NULL };
- int rc;
- ata_print_version_once(&pdev->dev, DRV_VERSION);
- rc = pcim_enable_device(pdev);
- if (rc)
- return rc;
- /* Any chip specific setup/optimisation/messages here */
- ata_pci_bmdma_clear_simplex(pdev);
- /* And let the library code do the work */
- return ata_pci_bmdma_init_one(pdev, port_info, &netcell_sht, NULL, 0);
- }
- static const struct pci_device_id netcell_pci_tbl[] = {
- { PCI_VDEVICE(NETCELL, PCI_DEVICE_ID_REVOLUTION), },
- { } /* terminate list */
- };
- static struct pci_driver netcell_pci_driver = {
- .name = DRV_NAME,
- .id_table = netcell_pci_tbl,
- .probe = netcell_init_one,
- .remove = ata_pci_remove_one,
- #ifdef CONFIG_PM_SLEEP
- .suspend = ata_pci_device_suspend,
- .resume = ata_pci_device_resume,
- #endif
- };
- module_pci_driver(netcell_pci_driver);
- MODULE_AUTHOR("Alan Cox");
- MODULE_DESCRIPTION("SCSI low-level driver for Netcell PATA RAID");
- MODULE_LICENSE("GPL");
- MODULE_DEVICE_TABLE(pci, netcell_pci_tbl);
- MODULE_VERSION(DRV_VERSION);
|