123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245 |
- /*
- * sata_uli.c - ULi Electronics SATA
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING. If not, write to
- * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- * libata documentation is available via 'make {ps|pdf}docs',
- * as Documentation/DocBook/libata.*
- *
- * Hardware documentation available under NDA.
- *
- */
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/gfp.h>
- #include <linux/pci.h>
- #include <linux/blkdev.h>
- #include <linux/delay.h>
- #include <linux/interrupt.h>
- #include <linux/device.h>
- #include <scsi/scsi_host.h>
- #include <linux/libata.h>
- #define DRV_NAME "sata_uli"
- #define DRV_VERSION "1.3"
- enum {
- uli_5289 = 0,
- uli_5287 = 1,
- uli_5281 = 2,
- uli_max_ports = 4,
- /* PCI configuration registers */
- ULI5287_BASE = 0x90, /* sata0 phy SCR registers */
- ULI5287_OFFS = 0x10, /* offset from sata0->sata1 phy regs */
- ULI5281_BASE = 0x60, /* sata0 phy SCR registers */
- ULI5281_OFFS = 0x60, /* offset from sata0->sata1 phy regs */
- };
- struct uli_priv {
- unsigned int scr_cfg_addr[uli_max_ports];
- };
- static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
- static int uli_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
- static int uli_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
- static const struct pci_device_id uli_pci_tbl[] = {
- { PCI_VDEVICE(AL, 0x5289), uli_5289 },
- { PCI_VDEVICE(AL, 0x5287), uli_5287 },
- { PCI_VDEVICE(AL, 0x5281), uli_5281 },
- { } /* terminate list */
- };
- static struct pci_driver uli_pci_driver = {
- .name = DRV_NAME,
- .id_table = uli_pci_tbl,
- .probe = uli_init_one,
- .remove = ata_pci_remove_one,
- };
- static struct scsi_host_template uli_sht = {
- ATA_BMDMA_SHT(DRV_NAME),
- };
- static struct ata_port_operations uli_ops = {
- .inherits = &ata_bmdma_port_ops,
- .scr_read = uli_scr_read,
- .scr_write = uli_scr_write,
- .hardreset = ATA_OP_NULL,
- };
- static const struct ata_port_info uli_port_info = {
- .flags = ATA_FLAG_SATA | ATA_FLAG_IGN_SIMPLEX,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &uli_ops,
- };
- MODULE_AUTHOR("Peer Chen");
- MODULE_DESCRIPTION("low-level driver for ULi Electronics SATA controller");
- MODULE_LICENSE("GPL");
- MODULE_DEVICE_TABLE(pci, uli_pci_tbl);
- MODULE_VERSION(DRV_VERSION);
- static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg)
- {
- struct uli_priv *hpriv = ap->host->private_data;
- return hpriv->scr_cfg_addr[ap->port_no] + (4 * sc_reg);
- }
- static u32 uli_scr_cfg_read(struct ata_link *link, unsigned int sc_reg)
- {
- struct pci_dev *pdev = to_pci_dev(link->ap->host->dev);
- unsigned int cfg_addr = get_scr_cfg_addr(link->ap, sc_reg);
- u32 val;
- pci_read_config_dword(pdev, cfg_addr, &val);
- return val;
- }
- static void uli_scr_cfg_write(struct ata_link *link, unsigned int scr, u32 val)
- {
- struct pci_dev *pdev = to_pci_dev(link->ap->host->dev);
- unsigned int cfg_addr = get_scr_cfg_addr(link->ap, scr);
- pci_write_config_dword(pdev, cfg_addr, val);
- }
- static int uli_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val)
- {
- if (sc_reg > SCR_CONTROL)
- return -EINVAL;
- *val = uli_scr_cfg_read(link, sc_reg);
- return 0;
- }
- static int uli_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
- {
- if (sc_reg > SCR_CONTROL) //SCR_CONTROL=2, SCR_ERROR=1, SCR_STATUS=0
- return -EINVAL;
- uli_scr_cfg_write(link, sc_reg, val);
- return 0;
- }
- static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
- {
- const struct ata_port_info *ppi[] = { &uli_port_info, NULL };
- unsigned int board_idx = (unsigned int) ent->driver_data;
- struct ata_host *host;
- struct uli_priv *hpriv;
- void __iomem * const *iomap;
- struct ata_ioports *ioaddr;
- int n_ports, rc;
- ata_print_version_once(&pdev->dev, DRV_VERSION);
- rc = pcim_enable_device(pdev);
- if (rc)
- return rc;
- n_ports = 2;
- if (board_idx == uli_5287)
- n_ports = 4;
- /* allocate the host */
- host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
- if (!host)
- return -ENOMEM;
- hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
- if (!hpriv)
- return -ENOMEM;
- host->private_data = hpriv;
- /* the first two ports are standard SFF */
- rc = ata_pci_sff_init_host(host);
- if (rc)
- return rc;
- ata_pci_bmdma_init(host);
- iomap = host->iomap;
- switch (board_idx) {
- case uli_5287:
- /* If there are four, the last two live right after
- * the standard SFF ports.
- */
- hpriv->scr_cfg_addr[0] = ULI5287_BASE;
- hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS;
- ioaddr = &host->ports[2]->ioaddr;
- ioaddr->cmd_addr = iomap[0] + 8;
- ioaddr->altstatus_addr =
- ioaddr->ctl_addr = (void __iomem *)
- ((unsigned long)iomap[1] | ATA_PCI_CTL_OFS) + 4;
- ioaddr->bmdma_addr = iomap[4] + 16;
- hpriv->scr_cfg_addr[2] = ULI5287_BASE + ULI5287_OFFS*4;
- ata_sff_std_ports(ioaddr);
- ata_port_desc(host->ports[2],
- "cmd 0x%llx ctl 0x%llx bmdma 0x%llx",
- (unsigned long long)pci_resource_start(pdev, 0) + 8,
- ((unsigned long long)pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS) + 4,
- (unsigned long long)pci_resource_start(pdev, 4) + 16);
- ioaddr = &host->ports[3]->ioaddr;
- ioaddr->cmd_addr = iomap[2] + 8;
- ioaddr->altstatus_addr =
- ioaddr->ctl_addr = (void __iomem *)
- ((unsigned long)iomap[3] | ATA_PCI_CTL_OFS) + 4;
- ioaddr->bmdma_addr = iomap[4] + 24;
- hpriv->scr_cfg_addr[3] = ULI5287_BASE + ULI5287_OFFS*5;
- ata_sff_std_ports(ioaddr);
- ata_port_desc(host->ports[2],
- "cmd 0x%llx ctl 0x%llx bmdma 0x%llx",
- (unsigned long long)pci_resource_start(pdev, 2) + 9,
- ((unsigned long long)pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS) + 4,
- (unsigned long long)pci_resource_start(pdev, 4) + 24);
- break;
- case uli_5289:
- hpriv->scr_cfg_addr[0] = ULI5287_BASE;
- hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS;
- break;
- case uli_5281:
- hpriv->scr_cfg_addr[0] = ULI5281_BASE;
- hpriv->scr_cfg_addr[1] = ULI5281_BASE + ULI5281_OFFS;
- break;
- default:
- BUG();
- break;
- }
- pci_set_master(pdev);
- pci_intx(pdev, 1);
- return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
- IRQF_SHARED, &uli_sht);
- }
- module_pci_driver(uli_pci_driver);
|