123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376 |
- /* drivers/atm/idt77105.c - IDT77105 (PHY) driver */
-
- /* Written 1999 by Greg Banks, NEC Australia <gnb@linuxfan.com>. Based on suni.c */
- #include <linux/module.h>
- #include <linux/kernel.h>
- #include <linux/mm.h>
- #include <linux/errno.h>
- #include <linux/atmdev.h>
- #include <linux/sonet.h>
- #include <linux/delay.h>
- #include <linux/timer.h>
- #include <linux/init.h>
- #include <linux/capability.h>
- #include <linux/atm_idt77105.h>
- #include <linux/spinlock.h>
- #include <linux/slab.h>
- #include <asm/param.h>
- #include <asm/uaccess.h>
- #include "idt77105.h"
- #undef GENERAL_DEBUG
- #ifdef GENERAL_DEBUG
- #define DPRINTK(format,args...) printk(KERN_DEBUG format,##args)
- #else
- #define DPRINTK(format,args...)
- #endif
- struct idt77105_priv {
- struct idt77105_stats stats; /* link diagnostics */
- struct atm_dev *dev; /* device back-pointer */
- struct idt77105_priv *next;
- int loop_mode;
- unsigned char old_mcr; /* storage of MCR reg while signal lost */
- };
- static DEFINE_SPINLOCK(idt77105_priv_lock);
- #define PRIV(dev) ((struct idt77105_priv *) dev->phy_data)
- #define PUT(val,reg) dev->ops->phy_put(dev,val,IDT77105_##reg)
- #define GET(reg) dev->ops->phy_get(dev,IDT77105_##reg)
- static void idt77105_stats_timer_func(unsigned long);
- static void idt77105_restart_timer_func(unsigned long);
- static DEFINE_TIMER(stats_timer, idt77105_stats_timer_func, 0, 0);
- static DEFINE_TIMER(restart_timer, idt77105_restart_timer_func, 0, 0);
- static int start_timer = 1;
- static struct idt77105_priv *idt77105_all = NULL;
- /*
- * Retrieve the value of one of the IDT77105's counters.
- * `counter' is one of the IDT77105_CTRSEL_* constants.
- */
- static u16 get_counter(struct atm_dev *dev, int counter)
- {
- u16 val;
-
- /* write the counter bit into PHY register 6 */
- PUT(counter, CTRSEL);
- /* read the low 8 bits from register 4 */
- val = GET(CTRLO);
- /* read the high 8 bits from register 5 */
- val |= GET(CTRHI)<<8;
-
- return val;
- }
- /*
- * Timer function called every second to gather statistics
- * from the 77105. This is done because the h/w registers
- * will overflow if not read at least once per second. The
- * kernel's stats are much higher precision. Also, having
- * a separate copy of the stats allows implementation of
- * an ioctl which gathers the stats *without* zero'ing them.
- */
- static void idt77105_stats_timer_func(unsigned long dummy)
- {
- struct idt77105_priv *walk;
- struct atm_dev *dev;
- struct idt77105_stats *stats;
- DPRINTK("IDT77105 gathering statistics\n");
- for (walk = idt77105_all; walk; walk = walk->next) {
- dev = walk->dev;
-
- stats = &walk->stats;
- stats->symbol_errors += get_counter(dev, IDT77105_CTRSEL_SEC);
- stats->tx_cells += get_counter(dev, IDT77105_CTRSEL_TCC);
- stats->rx_cells += get_counter(dev, IDT77105_CTRSEL_RCC);
- stats->rx_hec_errors += get_counter(dev, IDT77105_CTRSEL_RHEC);
- }
- if (!start_timer) mod_timer(&stats_timer,jiffies+IDT77105_STATS_TIMER_PERIOD);
- }
- /*
- * A separate timer func which handles restarting PHY chips which
- * have had the cable re-inserted after being pulled out. This is
- * done by polling the Good Signal Bit in the Interrupt Status
- * register every 5 seconds. The other technique (checking Good
- * Signal Bit in the interrupt handler) cannot be used because PHY
- * interrupts need to be disabled when the cable is pulled out
- * to avoid lots of spurious cell error interrupts.
- */
- static void idt77105_restart_timer_func(unsigned long dummy)
- {
- struct idt77105_priv *walk;
- struct atm_dev *dev;
- unsigned char istat;
- DPRINTK("IDT77105 checking for cable re-insertion\n");
- for (walk = idt77105_all; walk; walk = walk->next) {
- dev = walk->dev;
-
- if (dev->signal != ATM_PHY_SIG_LOST)
- continue;
-
- istat = GET(ISTAT); /* side effect: clears all interrupt status bits */
- if (istat & IDT77105_ISTAT_GOODSIG) {
- /* Found signal again */
- atm_dev_signal_change(dev, ATM_PHY_SIG_FOUND);
- printk(KERN_NOTICE "%s(itf %d): signal detected again\n",
- dev->type,dev->number);
- /* flush the receive FIFO */
- PUT( GET(DIAG) | IDT77105_DIAG_RFLUSH, DIAG);
- /* re-enable interrupts */
- PUT( walk->old_mcr ,MCR);
- }
- }
- if (!start_timer) mod_timer(&restart_timer,jiffies+IDT77105_RESTART_TIMER_PERIOD);
- }
- static int fetch_stats(struct atm_dev *dev,struct idt77105_stats __user *arg,int zero)
- {
- unsigned long flags;
- struct idt77105_stats stats;
- spin_lock_irqsave(&idt77105_priv_lock, flags);
- memcpy(&stats, &PRIV(dev)->stats, sizeof(struct idt77105_stats));
- if (zero)
- memset(&PRIV(dev)->stats, 0, sizeof(struct idt77105_stats));
- spin_unlock_irqrestore(&idt77105_priv_lock, flags);
- if (arg == NULL)
- return 0;
- return copy_to_user(arg, &stats,
- sizeof(struct idt77105_stats)) ? -EFAULT : 0;
- }
- static int set_loopback(struct atm_dev *dev,int mode)
- {
- int diag;
- diag = GET(DIAG) & ~IDT77105_DIAG_LCMASK;
- switch (mode) {
- case ATM_LM_NONE:
- break;
- case ATM_LM_LOC_ATM:
- diag |= IDT77105_DIAG_LC_PHY_LOOPBACK;
- break;
- case ATM_LM_RMT_ATM:
- diag |= IDT77105_DIAG_LC_LINE_LOOPBACK;
- break;
- default:
- return -EINVAL;
- }
- PUT(diag,DIAG);
- printk(KERN_NOTICE "%s(%d) Loopback mode is: %s\n", dev->type,
- dev->number,
- (mode == ATM_LM_NONE ? "NONE" :
- (mode == ATM_LM_LOC_ATM ? "DIAG (local)" :
- (mode == IDT77105_DIAG_LC_LINE_LOOPBACK ? "LOOP (remote)" :
- "unknown")))
- );
- PRIV(dev)->loop_mode = mode;
- return 0;
- }
- static int idt77105_ioctl(struct atm_dev *dev,unsigned int cmd,void __user *arg)
- {
- printk(KERN_NOTICE "%s(%d) idt77105_ioctl() called\n",dev->type,dev->number);
- switch (cmd) {
- case IDT77105_GETSTATZ:
- if (!capable(CAP_NET_ADMIN)) return -EPERM;
- /* fall through */
- case IDT77105_GETSTAT:
- return fetch_stats(dev, arg, cmd == IDT77105_GETSTATZ);
- case ATM_SETLOOP:
- return set_loopback(dev,(int)(unsigned long) arg);
- case ATM_GETLOOP:
- return put_user(PRIV(dev)->loop_mode,(int __user *)arg) ?
- -EFAULT : 0;
- case ATM_QUERYLOOP:
- return put_user(ATM_LM_LOC_ATM | ATM_LM_RMT_ATM,
- (int __user *) arg) ? -EFAULT : 0;
- default:
- return -ENOIOCTLCMD;
- }
- }
- static void idt77105_int(struct atm_dev *dev)
- {
- unsigned char istat;
-
- istat = GET(ISTAT); /* side effect: clears all interrupt status bits */
-
- DPRINTK("IDT77105 generated an interrupt, istat=%02x\n", (unsigned)istat);
-
- if (istat & IDT77105_ISTAT_RSCC) {
- /* Rx Signal Condition Change - line went up or down */
- if (istat & IDT77105_ISTAT_GOODSIG) { /* signal detected again */
- /* This should not happen (restart timer does it) but JIC */
- atm_dev_signal_change(dev, ATM_PHY_SIG_FOUND);
- } else { /* signal lost */
- /*
- * Disable interrupts and stop all transmission and
- * reception - the restart timer will restore these.
- */
- PRIV(dev)->old_mcr = GET(MCR);
- PUT(
- (PRIV(dev)->old_mcr|
- IDT77105_MCR_DREC|
- IDT77105_MCR_DRIC|
- IDT77105_MCR_HALTTX
- ) & ~IDT77105_MCR_EIP, MCR);
- atm_dev_signal_change(dev, ATM_PHY_SIG_LOST);
- printk(KERN_NOTICE "%s(itf %d): signal lost\n",
- dev->type,dev->number);
- }
- }
-
- if (istat & IDT77105_ISTAT_RFO) {
- /* Rx FIFO Overrun -- perform a FIFO flush */
- PUT( GET(DIAG) | IDT77105_DIAG_RFLUSH, DIAG);
- printk(KERN_NOTICE "%s(itf %d): receive FIFO overrun\n",
- dev->type,dev->number);
- }
- #ifdef GENERAL_DEBUG
- if (istat & (IDT77105_ISTAT_HECERR | IDT77105_ISTAT_SCR |
- IDT77105_ISTAT_RSE)) {
- /* normally don't care - just report in stats */
- printk(KERN_NOTICE "%s(itf %d): received cell with error\n",
- dev->type,dev->number);
- }
- #endif
- }
- static int idt77105_start(struct atm_dev *dev)
- {
- unsigned long flags;
- if (!(dev->dev_data = kmalloc(sizeof(struct idt77105_priv),GFP_KERNEL)))
- return -ENOMEM;
- PRIV(dev)->dev = dev;
- spin_lock_irqsave(&idt77105_priv_lock, flags);
- PRIV(dev)->next = idt77105_all;
- idt77105_all = PRIV(dev);
- spin_unlock_irqrestore(&idt77105_priv_lock, flags);
- memset(&PRIV(dev)->stats,0,sizeof(struct idt77105_stats));
-
- /* initialise dev->signal from Good Signal Bit */
- atm_dev_signal_change(dev,
- GET(ISTAT) & IDT77105_ISTAT_GOODSIG ?
- ATM_PHY_SIG_FOUND : ATM_PHY_SIG_LOST);
- if (dev->signal == ATM_PHY_SIG_LOST)
- printk(KERN_WARNING "%s(itf %d): no signal\n",dev->type,
- dev->number);
- /* initialise loop mode from hardware */
- switch ( GET(DIAG) & IDT77105_DIAG_LCMASK ) {
- case IDT77105_DIAG_LC_NORMAL:
- PRIV(dev)->loop_mode = ATM_LM_NONE;
- break;
- case IDT77105_DIAG_LC_PHY_LOOPBACK:
- PRIV(dev)->loop_mode = ATM_LM_LOC_ATM;
- break;
- case IDT77105_DIAG_LC_LINE_LOOPBACK:
- PRIV(dev)->loop_mode = ATM_LM_RMT_ATM;
- break;
- }
-
- /* enable interrupts, e.g. on loss of signal */
- PRIV(dev)->old_mcr = GET(MCR);
- if (dev->signal == ATM_PHY_SIG_FOUND) {
- PRIV(dev)->old_mcr |= IDT77105_MCR_EIP;
- PUT(PRIV(dev)->old_mcr, MCR);
- }
-
- idt77105_stats_timer_func(0); /* clear 77105 counters */
- (void) fetch_stats(dev,NULL,1); /* clear kernel counters */
-
- spin_lock_irqsave(&idt77105_priv_lock, flags);
- if (start_timer) {
- start_timer = 0;
-
- setup_timer(&stats_timer, idt77105_stats_timer_func, 0UL);
- stats_timer.expires = jiffies+IDT77105_STATS_TIMER_PERIOD;
- add_timer(&stats_timer);
-
- setup_timer(&restart_timer, idt77105_restart_timer_func, 0UL);
- restart_timer.expires = jiffies+IDT77105_RESTART_TIMER_PERIOD;
- add_timer(&restart_timer);
- }
- spin_unlock_irqrestore(&idt77105_priv_lock, flags);
- return 0;
- }
- static int idt77105_stop(struct atm_dev *dev)
- {
- struct idt77105_priv *walk, *prev;
- DPRINTK("%s(itf %d): stopping IDT77105\n",dev->type,dev->number);
-
- /* disable interrupts */
- PUT( GET(MCR) & ~IDT77105_MCR_EIP, MCR );
-
- /* detach private struct from atm_dev & free */
- for (prev = NULL, walk = idt77105_all ;
- walk != NULL;
- prev = walk, walk = walk->next) {
- if (walk->dev == dev) {
- if (prev != NULL)
- prev->next = walk->next;
- else
- idt77105_all = walk->next;
- dev->phy = NULL;
- dev->dev_data = NULL;
- kfree(walk);
- break;
- }
- }
- return 0;
- }
- static const struct atmphy_ops idt77105_ops = {
- .start = idt77105_start,
- .ioctl = idt77105_ioctl,
- .interrupt = idt77105_int,
- .stop = idt77105_stop,
- };
- int idt77105_init(struct atm_dev *dev)
- {
- dev->phy = &idt77105_ops;
- return 0;
- }
- EXPORT_SYMBOL(idt77105_init);
- static void __exit idt77105_exit(void)
- {
- /* turn off timers */
- del_timer_sync(&stats_timer);
- del_timer_sync(&restart_timer);
- }
- module_exit(idt77105_exit);
- MODULE_LICENSE("GPL");
|