123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266 |
- /*
- * drivers/base/power/trace.c
- *
- * Copyright (C) 2006 Linus Torvalds
- *
- * Trace facility for suspend/resume problems, when none of the
- * devices may be working.
- */
- #include <linux/pm-trace.h>
- #include <linux/export.h>
- #include <linux/rtc.h>
- #include <asm/rtc.h>
- #include "power.h"
- /*
- * Horrid, horrid, horrid.
- *
- * It turns out that the _only_ piece of hardware that actually
- * keeps its value across a hard boot (and, more importantly, the
- * POST init sequence) is literally the realtime clock.
- *
- * Never mind that an RTC chip has 114 bytes (and often a whole
- * other bank of an additional 128 bytes) of nice SRAM that is
- * _designed_ to keep data - the POST will clear it. So we literally
- * can just use the few bytes of actual time data, which means that
- * we're really limited.
- *
- * It means, for example, that we can't use the seconds at all
- * (since the time between the hang and the boot might be more
- * than a minute), and we'd better not depend on the low bits of
- * the minutes either.
- *
- * There are the wday fields etc, but I wouldn't guarantee those
- * are dependable either. And if the date isn't valid, either the
- * hw or POST will do strange things.
- *
- * So we're left with:
- * - year: 0-99
- * - month: 0-11
- * - day-of-month: 1-28
- * - hour: 0-23
- * - min: (0-30)*2
- *
- * Giving us a total range of 0-16128000 (0xf61800), ie less
- * than 24 bits of actual data we can save across reboots.
- *
- * And if your box can't boot in less than three minutes,
- * you're screwed.
- *
- * Now, almost 24 bits of data is pitifully small, so we need
- * to be pretty dense if we want to use it for anything nice.
- * What we do is that instead of saving off nice readable info,
- * we save off _hashes_ of information that we can hopefully
- * regenerate after the reboot.
- *
- * In particular, this means that we might be unlucky, and hit
- * a case where we have a hash collision, and we end up not
- * being able to tell for certain exactly which case happened.
- * But that's hopefully unlikely.
- *
- * What we do is to take the bits we can fit, and split them
- * into three parts (16*997*1009 = 16095568), and use the values
- * for:
- * - 0-15: user-settable
- * - 0-996: file + line number
- * - 0-1008: device
- */
- #define USERHASH (16)
- #define FILEHASH (997)
- #define DEVHASH (1009)
- #define DEVSEED (7919)
- static unsigned int dev_hash_value;
- static int set_magic_time(unsigned int user, unsigned int file, unsigned int device)
- {
- unsigned int n = user + USERHASH*(file + FILEHASH*device);
- // June 7th, 2006
- static struct rtc_time time = {
- .tm_sec = 0,
- .tm_min = 0,
- .tm_hour = 0,
- .tm_mday = 7,
- .tm_mon = 5, // June - counting from zero
- .tm_year = 106,
- .tm_wday = 3,
- .tm_yday = 160,
- .tm_isdst = 1
- };
- time.tm_year = (n % 100);
- n /= 100;
- time.tm_mon = (n % 12);
- n /= 12;
- time.tm_mday = (n % 28) + 1;
- n /= 28;
- time.tm_hour = (n % 24);
- n /= 24;
- time.tm_min = (n % 20) * 3;
- n /= 20;
- set_rtc_time(&time);
- return n ? -1 : 0;
- }
- static unsigned int read_magic_time(void)
- {
- struct rtc_time time;
- unsigned int val;
- get_rtc_time(&time);
- pr_info("RTC time: %2d:%02d:%02d, date: %02d/%02d/%02d\n",
- time.tm_hour, time.tm_min, time.tm_sec,
- time.tm_mon + 1, time.tm_mday, time.tm_year % 100);
- val = time.tm_year; /* 100 years */
- if (val > 100)
- val -= 100;
- val += time.tm_mon * 100; /* 12 months */
- val += (time.tm_mday-1) * 100 * 12; /* 28 month-days */
- val += time.tm_hour * 100 * 12 * 28; /* 24 hours */
- val += (time.tm_min / 3) * 100 * 12 * 28 * 24; /* 20 3-minute intervals */
- return val;
- }
- /*
- * This is just the sdbm hash function with a user-supplied
- * seed and final size parameter.
- */
- static unsigned int hash_string(unsigned int seed, const char *data, unsigned int mod)
- {
- unsigned char c;
- while ((c = *data++) != 0) {
- seed = (seed << 16) + (seed << 6) - seed + c;
- }
- return seed % mod;
- }
- void set_trace_device(struct device *dev)
- {
- dev_hash_value = hash_string(DEVSEED, dev_name(dev), DEVHASH);
- }
- EXPORT_SYMBOL(set_trace_device);
- /*
- * We could just take the "tracedata" index into the .tracedata
- * section instead. Generating a hash of the data gives us a
- * chance to work across kernel versions, and perhaps more
- * importantly it also gives us valid/invalid check (ie we will
- * likely not give totally bogus reports - if the hash matches,
- * it's not any guarantee, but it's a high _likelihood_ that
- * the match is valid).
- */
- void generate_pm_trace(const void *tracedata, unsigned int user)
- {
- unsigned short lineno = *(unsigned short *)tracedata;
- const char *file = *(const char **)(tracedata + 2);
- unsigned int user_hash_value, file_hash_value;
- user_hash_value = user % USERHASH;
- file_hash_value = hash_string(lineno, file, FILEHASH);
- set_magic_time(user_hash_value, file_hash_value, dev_hash_value);
- }
- EXPORT_SYMBOL(generate_pm_trace);
- extern char __tracedata_start[], __tracedata_end[];
- static int show_file_hash(unsigned int value)
- {
- int match;
- char *tracedata;
- match = 0;
- for (tracedata = __tracedata_start ; tracedata < __tracedata_end ;
- tracedata += 2 + sizeof(unsigned long)) {
- unsigned short lineno = *(unsigned short *)tracedata;
- const char *file = *(const char **)(tracedata + 2);
- unsigned int hash = hash_string(lineno, file, FILEHASH);
- if (hash != value)
- continue;
- pr_info(" hash matches %s:%u\n", file, lineno);
- match++;
- }
- return match;
- }
- static int show_dev_hash(unsigned int value)
- {
- int match = 0;
- struct list_head *entry;
- device_pm_lock();
- entry = dpm_list.prev;
- while (entry != &dpm_list) {
- struct device * dev = to_device(entry);
- unsigned int hash = hash_string(DEVSEED, dev_name(dev), DEVHASH);
- if (hash == value) {
- dev_info(dev, "hash matches\n");
- match++;
- }
- entry = entry->prev;
- }
- device_pm_unlock();
- return match;
- }
- static unsigned int hash_value_early_read;
- int show_trace_dev_match(char *buf, size_t size)
- {
- unsigned int value = hash_value_early_read / (USERHASH * FILEHASH);
- int ret = 0;
- struct list_head *entry;
- /*
- * It's possible that multiple devices will match the hash and we can't
- * tell which is the culprit, so it's best to output them all.
- */
- device_pm_lock();
- entry = dpm_list.prev;
- while (size && entry != &dpm_list) {
- struct device *dev = to_device(entry);
- unsigned int hash = hash_string(DEVSEED, dev_name(dev),
- DEVHASH);
- if (hash == value) {
- int len = snprintf(buf, size, "%s\n",
- dev_driver_string(dev));
- if (len > size)
- len = size;
- buf += len;
- ret += len;
- size -= len;
- }
- entry = entry->prev;
- }
- device_pm_unlock();
- return ret;
- }
- static int early_resume_init(void)
- {
- hash_value_early_read = read_magic_time();
- return 0;
- }
- static int late_resume_init(void)
- {
- unsigned int val = hash_value_early_read;
- unsigned int user, file, dev;
- user = val % USERHASH;
- val = val / USERHASH;
- file = val % FILEHASH;
- val = val / FILEHASH;
- dev = val /* % DEVHASH */;
- pr_info(" Magic number: %d:%d:%d\n", user, file, dev);
- show_file_hash(file);
- show_dev_hash(dev);
- return 0;
- }
- core_initcall(early_resume_init);
- late_initcall(late_resume_init);
|