123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613 |
- /*
- *
- * A driver for Nokia Connectivity Card DTL-1 devices
- *
- * Copyright (C) 2001-2002 Marcel Holtmann <marcel@holtmann.org>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation;
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
- *
- */
- #include <linux/module.h>
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/slab.h>
- #include <linux/types.h>
- #include <linux/delay.h>
- #include <linux/errno.h>
- #include <linux/ptrace.h>
- #include <linux/ioport.h>
- #include <linux/spinlock.h>
- #include <linux/moduleparam.h>
- #include <linux/skbuff.h>
- #include <linux/string.h>
- #include <linux/serial.h>
- #include <linux/serial_reg.h>
- #include <linux/bitops.h>
- #include <asm/io.h>
- #include <pcmcia/cistpl.h>
- #include <pcmcia/ciscode.h>
- #include <pcmcia/ds.h>
- #include <pcmcia/cisreg.h>
- #include <net/bluetooth/bluetooth.h>
- #include <net/bluetooth/hci_core.h>
- /* ======================== Module parameters ======================== */
- MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
- MODULE_DESCRIPTION("Bluetooth driver for Nokia Connectivity Card DTL-1");
- MODULE_LICENSE("GPL");
- /* ======================== Local structures ======================== */
- struct dtl1_info {
- struct pcmcia_device *p_dev;
- struct hci_dev *hdev;
- spinlock_t lock; /* For serializing operations */
- unsigned long flowmask; /* HCI flow mask */
- int ri_latch;
- struct sk_buff_head txq;
- unsigned long tx_state;
- unsigned long rx_state;
- unsigned long rx_count;
- struct sk_buff *rx_skb;
- };
- static int dtl1_config(struct pcmcia_device *link);
- /* Transmit states */
- #define XMIT_SENDING 1
- #define XMIT_WAKEUP 2
- #define XMIT_WAITING 8
- /* Receiver States */
- #define RECV_WAIT_NSH 0
- #define RECV_WAIT_DATA 1
- struct nsh {
- u8 type;
- u8 zero;
- u16 len;
- } __packed; /* Nokia Specific Header */
- #define NSHL 4 /* Nokia Specific Header Length */
- /* ======================== Interrupt handling ======================== */
- static int dtl1_write(unsigned int iobase, int fifo_size, __u8 *buf, int len)
- {
- int actual = 0;
- /* Tx FIFO should be empty */
- if (!(inb(iobase + UART_LSR) & UART_LSR_THRE))
- return 0;
- /* Fill FIFO with current frame */
- while ((fifo_size-- > 0) && (actual < len)) {
- /* Transmit next byte */
- outb(buf[actual], iobase + UART_TX);
- actual++;
- }
- return actual;
- }
- static void dtl1_write_wakeup(struct dtl1_info *info)
- {
- if (!info) {
- BT_ERR("Unknown device");
- return;
- }
- if (test_bit(XMIT_WAITING, &(info->tx_state))) {
- set_bit(XMIT_WAKEUP, &(info->tx_state));
- return;
- }
- if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) {
- set_bit(XMIT_WAKEUP, &(info->tx_state));
- return;
- }
- do {
- unsigned int iobase = info->p_dev->resource[0]->start;
- register struct sk_buff *skb;
- int len;
- clear_bit(XMIT_WAKEUP, &(info->tx_state));
- if (!pcmcia_dev_present(info->p_dev))
- return;
- skb = skb_dequeue(&(info->txq));
- if (!skb)
- break;
- /* Send frame */
- len = dtl1_write(iobase, 32, skb->data, skb->len);
- if (len == skb->len) {
- set_bit(XMIT_WAITING, &(info->tx_state));
- kfree_skb(skb);
- } else {
- skb_pull(skb, len);
- skb_queue_head(&(info->txq), skb);
- }
- info->hdev->stat.byte_tx += len;
- } while (test_bit(XMIT_WAKEUP, &(info->tx_state)));
- clear_bit(XMIT_SENDING, &(info->tx_state));
- }
- static void dtl1_control(struct dtl1_info *info, struct sk_buff *skb)
- {
- u8 flowmask = *(u8 *)skb->data;
- int i;
- printk(KERN_INFO "Bluetooth: Nokia control data =");
- for (i = 0; i < skb->len; i++)
- printk(" %02x", skb->data[i]);
- printk("\n");
- /* transition to active state */
- if (((info->flowmask & 0x07) == 0) && ((flowmask & 0x07) != 0)) {
- clear_bit(XMIT_WAITING, &(info->tx_state));
- dtl1_write_wakeup(info);
- }
- info->flowmask = flowmask;
- kfree_skb(skb);
- }
- static void dtl1_receive(struct dtl1_info *info)
- {
- unsigned int iobase;
- struct nsh *nsh;
- int boguscount = 0;
- if (!info) {
- BT_ERR("Unknown device");
- return;
- }
- iobase = info->p_dev->resource[0]->start;
- do {
- info->hdev->stat.byte_rx++;
- /* Allocate packet */
- if (info->rx_skb == NULL) {
- info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
- if (!info->rx_skb) {
- BT_ERR("Can't allocate mem for new packet");
- info->rx_state = RECV_WAIT_NSH;
- info->rx_count = NSHL;
- return;
- }
- }
- *skb_put(info->rx_skb, 1) = inb(iobase + UART_RX);
- nsh = (struct nsh *)info->rx_skb->data;
- info->rx_count--;
- if (info->rx_count == 0) {
- switch (info->rx_state) {
- case RECV_WAIT_NSH:
- info->rx_state = RECV_WAIT_DATA;
- info->rx_count = nsh->len + (nsh->len & 0x0001);
- break;
- case RECV_WAIT_DATA:
- bt_cb(info->rx_skb)->pkt_type = nsh->type;
- /* remove PAD byte if it exists */
- if (nsh->len & 0x0001) {
- info->rx_skb->tail--;
- info->rx_skb->len--;
- }
- /* remove NSH */
- skb_pull(info->rx_skb, NSHL);
- switch (bt_cb(info->rx_skb)->pkt_type) {
- case 0x80:
- /* control data for the Nokia Card */
- dtl1_control(info, info->rx_skb);
- break;
- case 0x82:
- case 0x83:
- case 0x84:
- /* send frame to the HCI layer */
- bt_cb(info->rx_skb)->pkt_type &= 0x0f;
- hci_recv_frame(info->hdev, info->rx_skb);
- break;
- default:
- /* unknown packet */
- BT_ERR("Unknown HCI packet with type 0x%02x received", bt_cb(info->rx_skb)->pkt_type);
- kfree_skb(info->rx_skb);
- break;
- }
- info->rx_state = RECV_WAIT_NSH;
- info->rx_count = NSHL;
- info->rx_skb = NULL;
- break;
- }
- }
- /* Make sure we don't stay here too long */
- if (boguscount++ > 32)
- break;
- } while (inb(iobase + UART_LSR) & UART_LSR_DR);
- }
- static irqreturn_t dtl1_interrupt(int irq, void *dev_inst)
- {
- struct dtl1_info *info = dev_inst;
- unsigned int iobase;
- unsigned char msr;
- int boguscount = 0;
- int iir, lsr;
- irqreturn_t r = IRQ_NONE;
- if (!info || !info->hdev)
- /* our irq handler is shared */
- return IRQ_NONE;
- iobase = info->p_dev->resource[0]->start;
- spin_lock(&(info->lock));
- iir = inb(iobase + UART_IIR) & UART_IIR_ID;
- while (iir) {
- r = IRQ_HANDLED;
- /* Clear interrupt */
- lsr = inb(iobase + UART_LSR);
- switch (iir) {
- case UART_IIR_RLSI:
- BT_ERR("RLSI");
- break;
- case UART_IIR_RDI:
- /* Receive interrupt */
- dtl1_receive(info);
- break;
- case UART_IIR_THRI:
- if (lsr & UART_LSR_THRE) {
- /* Transmitter ready for data */
- dtl1_write_wakeup(info);
- }
- break;
- default:
- BT_ERR("Unhandled IIR=%#x", iir);
- break;
- }
- /* Make sure we don't stay here too long */
- if (boguscount++ > 100)
- break;
- iir = inb(iobase + UART_IIR) & UART_IIR_ID;
- }
- msr = inb(iobase + UART_MSR);
- if (info->ri_latch ^ (msr & UART_MSR_RI)) {
- info->ri_latch = msr & UART_MSR_RI;
- clear_bit(XMIT_WAITING, &(info->tx_state));
- dtl1_write_wakeup(info);
- r = IRQ_HANDLED;
- }
- spin_unlock(&(info->lock));
- return r;
- }
- /* ======================== HCI interface ======================== */
- static int dtl1_hci_open(struct hci_dev *hdev)
- {
- return 0;
- }
- static int dtl1_hci_flush(struct hci_dev *hdev)
- {
- struct dtl1_info *info = hci_get_drvdata(hdev);
- /* Drop TX queue */
- skb_queue_purge(&(info->txq));
- return 0;
- }
- static int dtl1_hci_close(struct hci_dev *hdev)
- {
- dtl1_hci_flush(hdev);
- return 0;
- }
- static int dtl1_hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
- {
- struct dtl1_info *info = hci_get_drvdata(hdev);
- struct sk_buff *s;
- struct nsh nsh;
- switch (bt_cb(skb)->pkt_type) {
- case HCI_COMMAND_PKT:
- hdev->stat.cmd_tx++;
- nsh.type = 0x81;
- break;
- case HCI_ACLDATA_PKT:
- hdev->stat.acl_tx++;
- nsh.type = 0x82;
- break;
- case HCI_SCODATA_PKT:
- hdev->stat.sco_tx++;
- nsh.type = 0x83;
- break;
- default:
- return -EILSEQ;
- }
- nsh.zero = 0;
- nsh.len = skb->len;
- s = bt_skb_alloc(NSHL + skb->len + 1, GFP_ATOMIC);
- if (!s)
- return -ENOMEM;
- skb_reserve(s, NSHL);
- skb_copy_from_linear_data(skb, skb_put(s, skb->len), skb->len);
- if (skb->len & 0x0001)
- *skb_put(s, 1) = 0; /* PAD */
- /* Prepend skb with Nokia frame header and queue */
- memcpy(skb_push(s, NSHL), &nsh, NSHL);
- skb_queue_tail(&(info->txq), s);
- dtl1_write_wakeup(info);
- kfree_skb(skb);
- return 0;
- }
- /* ======================== Card services HCI interaction ======================== */
- static int dtl1_open(struct dtl1_info *info)
- {
- unsigned long flags;
- unsigned int iobase = info->p_dev->resource[0]->start;
- struct hci_dev *hdev;
- spin_lock_init(&(info->lock));
- skb_queue_head_init(&(info->txq));
- info->rx_state = RECV_WAIT_NSH;
- info->rx_count = NSHL;
- info->rx_skb = NULL;
- set_bit(XMIT_WAITING, &(info->tx_state));
- /* Initialize HCI device */
- hdev = hci_alloc_dev();
- if (!hdev) {
- BT_ERR("Can't allocate HCI device");
- return -ENOMEM;
- }
- info->hdev = hdev;
- hdev->bus = HCI_PCCARD;
- hci_set_drvdata(hdev, info);
- SET_HCIDEV_DEV(hdev, &info->p_dev->dev);
- hdev->open = dtl1_hci_open;
- hdev->close = dtl1_hci_close;
- hdev->flush = dtl1_hci_flush;
- hdev->send = dtl1_hci_send_frame;
- spin_lock_irqsave(&(info->lock), flags);
- /* Reset UART */
- outb(0, iobase + UART_MCR);
- /* Turn off interrupts */
- outb(0, iobase + UART_IER);
- /* Initialize UART */
- outb(UART_LCR_WLEN8, iobase + UART_LCR); /* Reset DLAB */
- outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase + UART_MCR);
- info->ri_latch = inb(info->p_dev->resource[0]->start + UART_MSR)
- & UART_MSR_RI;
- /* Turn on interrupts */
- outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
- spin_unlock_irqrestore(&(info->lock), flags);
- /* Timeout before it is safe to send the first HCI packet */
- msleep(2000);
- /* Register HCI device */
- if (hci_register_dev(hdev) < 0) {
- BT_ERR("Can't register HCI device");
- info->hdev = NULL;
- hci_free_dev(hdev);
- return -ENODEV;
- }
- return 0;
- }
- static int dtl1_close(struct dtl1_info *info)
- {
- unsigned long flags;
- unsigned int iobase = info->p_dev->resource[0]->start;
- struct hci_dev *hdev = info->hdev;
- if (!hdev)
- return -ENODEV;
- dtl1_hci_close(hdev);
- spin_lock_irqsave(&(info->lock), flags);
- /* Reset UART */
- outb(0, iobase + UART_MCR);
- /* Turn off interrupts */
- outb(0, iobase + UART_IER);
- spin_unlock_irqrestore(&(info->lock), flags);
- hci_unregister_dev(hdev);
- hci_free_dev(hdev);
- return 0;
- }
- static int dtl1_probe(struct pcmcia_device *link)
- {
- struct dtl1_info *info;
- /* Create new info device */
- info = devm_kzalloc(&link->dev, sizeof(*info), GFP_KERNEL);
- if (!info)
- return -ENOMEM;
- info->p_dev = link;
- link->priv = info;
- link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
- return dtl1_config(link);
- }
- static void dtl1_detach(struct pcmcia_device *link)
- {
- struct dtl1_info *info = link->priv;
- dtl1_close(info);
- pcmcia_disable_device(link);
- }
- static int dtl1_confcheck(struct pcmcia_device *p_dev, void *priv_data)
- {
- if ((p_dev->resource[1]->end) || (p_dev->resource[1]->end < 8))
- return -ENODEV;
- p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
- p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
- return pcmcia_request_io(p_dev);
- }
- static int dtl1_config(struct pcmcia_device *link)
- {
- struct dtl1_info *info = link->priv;
- int ret;
- /* Look for a generic full-sized window */
- link->resource[0]->end = 8;
- ret = pcmcia_loop_config(link, dtl1_confcheck, NULL);
- if (ret)
- goto failed;
- ret = pcmcia_request_irq(link, dtl1_interrupt);
- if (ret)
- goto failed;
- ret = pcmcia_enable_device(link);
- if (ret)
- goto failed;
- ret = dtl1_open(info);
- if (ret)
- goto failed;
- return 0;
- failed:
- dtl1_detach(link);
- return ret;
- }
- static const struct pcmcia_device_id dtl1_ids[] = {
- PCMCIA_DEVICE_PROD_ID12("Nokia Mobile Phones", "DTL-1", 0xe1bfdd64, 0xe168480d),
- PCMCIA_DEVICE_PROD_ID12("Nokia Mobile Phones", "DTL-4", 0xe1bfdd64, 0x9102bc82),
- PCMCIA_DEVICE_PROD_ID12("Socket", "CF", 0xb38bcc2e, 0x44ebf863),
- PCMCIA_DEVICE_PROD_ID12("Socket", "CF+ Personal Network Card", 0xb38bcc2e, 0xe732bae3),
- PCMCIA_DEVICE_NULL
- };
- MODULE_DEVICE_TABLE(pcmcia, dtl1_ids);
- static struct pcmcia_driver dtl1_driver = {
- .owner = THIS_MODULE,
- .name = "dtl1_cs",
- .probe = dtl1_probe,
- .remove = dtl1_detach,
- .id_table = dtl1_ids,
- };
- module_pcmcia_driver(dtl1_driver);
|