123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143 |
- #
- # Bus Devices
- #
- menu "Bus devices"
- config ARM_CCI
- bool
- config ARM_CCI_PMU
- bool
- select ARM_CCI
- config ARM_CCI400_COMMON
- bool
- select ARM_CCI
- config ARM_CCI400_PMU
- bool "ARM CCI400 PMU support"
- depends on (ARM && CPU_V7) || ARM64
- depends on PERF_EVENTS
- select ARM_CCI400_COMMON
- select ARM_CCI_PMU
- help
- Support for PMU events monitoring on the ARM CCI-400 (cache coherent
- interconnect). CCI-400 supports counting events related to the
- connected slave/master interfaces.
- config ARM_CCI400_PORT_CTRL
- bool
- depends on ARM && OF && CPU_V7
- select ARM_CCI400_COMMON
- help
- Low level power management driver for CCI400 cache coherent
- interconnect for ARM platforms.
- config ARM_CCI500_PMU
- bool "ARM CCI500 PMU support"
- depends on (ARM && CPU_V7) || ARM64
- depends on PERF_EVENTS
- select ARM_CCI_PMU
- help
- Support for PMU events monitoring on the ARM CCI-500 cache coherent
- interconnect. CCI-500 provides 8 independent event counters, which
- can count events pertaining to the slave/master interfaces as well
- as the internal events to the CCI.
- If unsure, say Y
- config ARM_CCN
- bool "ARM CCN driver support"
- depends on ARM || ARM64
- depends on PERF_EVENTS
- help
- PMU (perf) driver supporting the ARM CCN (Cache Coherent Network)
- interconnect.
- config BRCMSTB_GISB_ARB
- bool "Broadcom STB GISB bus arbiter"
- depends on ARM || MIPS
- help
- Driver for the Broadcom Set Top Box System-on-a-chip internal bus
- arbiter. This driver provides timeout and target abort error handling
- and internal bus master decoding.
- config IMX_WEIM
- bool "Freescale EIM DRIVER"
- depends on ARCH_MXC
- help
- Driver for i.MX WEIM controller.
- The WEIM(Wireless External Interface Module) works like a bus.
- You can attach many different devices on it, such as NOR, onenand.
- config MIPS_CDMM
- bool "MIPS Common Device Memory Map (CDMM) Driver"
- depends on CPU_MIPSR2
- help
- Driver needed for the MIPS Common Device Memory Map bus in MIPS
- cores. This bus is for per-CPU tightly coupled devices such as the
- Fast Debug Channel (FDC).
- For this to work, either your bootloader needs to enable the CDMM
- region at an unused physical address on the boot CPU, or else your
- platform code needs to implement mips_cdmm_phys_base() (see
- asm/cdmm.h).
- config MVEBU_MBUS
- bool
- depends on PLAT_ORION
- help
- Driver needed for the MBus configuration on Marvell EBU SoCs
- (Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP).
- config OMAP_INTERCONNECT
- tristate "OMAP INTERCONNECT DRIVER"
- depends on ARCH_OMAP2PLUS
- help
- Driver to enable OMAP interconnect error handling driver.
- config OMAP_OCP2SCP
- tristate "OMAP OCP2SCP DRIVER"
- depends on ARCH_OMAP2PLUS
- help
- Driver to enable ocp2scp module which transforms ocp interface
- protocol to scp protocol. In OMAP4, USB PHY is connected via
- OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via
- OCP2SCP.
- config SIMPLE_PM_BUS
- bool "Simple Power-Managed Bus Driver"
- depends on OF && PM
- depends on ARCH_SHMOBILE || COMPILE_TEST
- help
- Driver for transparent busses that don't need a real driver, but
- where the bus controller is part of a PM domain, or under the control
- of a functional clock, and thus relies on runtime PM for managing
- this PM domain and/or clock.
- An example of such a bus controller is the Renesas Bus State
- Controller (BSC, sometimes called "LBSC within Bus Bridge", or
- "External Bus Interface") as found on several Renesas ARM SoCs.
- config SUNXI_RSB
- tristate "Allwinner sunXi Reduced Serial Bus Driver"
- default MACH_SUN8I || MACH_SUN9I
- depends on ARCH_SUNXI
- select REGMAP
- help
- Say y here to enable support for Allwinner's Reduced Serial Bus
- (RSB) support. This controller is responsible for communicating
- with various RSB based devices, such as AXP223, AXP8XX PMICs,
- and AC100/AC200 ICs.
- config VEXPRESS_CONFIG
- bool "Versatile Express configuration bus"
- default y if ARCH_VEXPRESS
- depends on ARM || ARM64
- depends on OF
- select REGMAP
- help
- Platform configuration infrastructure for the ARM Ltd.
- Versatile Express.
- endmenu
|