CooCenter-System-kernel/drivers/char/tpm/tpm_crb.c

/*
 * Copyright (C) 2014 Intel Corporation
 *
 * Authors:
 * Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
 *
 * Maintained by: <tpmdd-devel@lists.sourceforge.net>
 *
 * This device driver implements the TPM interface as defined in
 * the TCG CRB 2.0 TPM specification.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; version 2
 * of the License.
 */

#include <linux/acpi.h>
#include <linux/highmem.h>
#include <linux/rculist.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include "tpm.h"

#define ACPI_SIG_TPM2 "TPM2"

static const u8 CRB_ACPI_START_UUID[] = {
	/* 0000 */ 0xAB, 0x6C, 0xBF, 0x6B, 0x63, 0x54, 0x14, 0x47,
	/* 0008 */ 0xB7, 0xCD, 0xF0, 0x20, 0x3C, 0x03, 0x68, 0xD4
};

enum crb_defaults {
	CRB_ACPI_START_REVISION_ID = 1,
	CRB_ACPI_START_INDEX = 1,
};

struct acpi_tpm2 {
	struct acpi_table_header hdr;
	u16 platform_class;
	u16 reserved;
	u64 control_area_pa;
	u32 start_method;
} __packed;

enum crb_ca_request {
	CRB_CA_REQ_GO_IDLE	= BIT(0),
	CRB_CA_REQ_CMD_READY	= BIT(1),
};

enum crb_ca_status {
	CRB_CA_STS_ERROR	= BIT(0),
	CRB_CA_STS_TPM_IDLE	= BIT(1),
};

enum crb_start {
	CRB_START_INVOKE	= BIT(0),
};

enum crb_cancel {
	CRB_CANCEL_INVOKE	= BIT(0),
};

struct crb_control_area {
	u32 req;
	u32 sts;
	u32 cancel;
	u32 start;
	u32 int_enable;
	u32 int_sts;
	u32 cmd_size;
	u32 cmd_pa_low;
	u32 cmd_pa_high;
	u32 rsp_size;
	u64 rsp_pa;
} __packed;

enum crb_status {
	CRB_STS_COMPLETE	= BIT(0),
};

enum crb_flags {
	CRB_FL_ACPI_START	= BIT(0),
	CRB_FL_CRB_START	= BIT(1),
};

struct crb_priv {
	unsigned int flags;
	struct crb_control_area __iomem *cca;
	u8 __iomem *cmd;
	u8 __iomem *rsp;
};

static SIMPLE_DEV_PM_OPS(crb_pm, tpm_pm_suspend, tpm_pm_resume);

static u8 crb_status(struct tpm_chip *chip)
{
	struct crb_priv *priv = chip->vendor.priv;
	u8 sts = 0;

	if ((le32_to_cpu(ioread32(&priv->cca->start)) & CRB_START_INVOKE) !=
	    CRB_START_INVOKE)
		sts |= CRB_STS_COMPLETE;

	return sts;
}

static int crb_recv(struct tpm_chip *chip, u8 *buf, size_t count)
{
	struct crb_priv *priv = chip->vendor.priv;
	unsigned int expected;

	/* A sanity check that the upper layer wants to get at least the header
	 * as that is the minimum size for any TPM response.
	 */
	if (count < TPM_HEADER_SIZE)
		return -EIO;

	/* If this bit is set, according to the spec, the TPM is in
	 * unrecoverable condition.
	 */
	if (le32_to_cpu(ioread32(&priv->cca->sts)) & CRB_CA_STS_ERROR)
		return -EIO;

	/* Read the first 8 bytes in order to get the length of the response.
	 * We read exactly a quad word in order to make sure that the remaining
	 * reads will be aligned.
	 */
	memcpy_fromio(buf, priv->rsp, 8);

	expected = be32_to_cpup((__be32 *)&buf[2]);
	if (expected > count || expected < TPM_HEADER_SIZE)
		return -EIO;

	memcpy_fromio(&buf[8], &priv->rsp[8], expected - 8);

	return expected;
}

static int crb_do_acpi_start(struct tpm_chip *chip)
{
	union acpi_object *obj;
	int rc;

	obj = acpi_evaluate_dsm(chip->acpi_dev_handle,
				CRB_ACPI_START_UUID,
				CRB_ACPI_START_REVISION_ID,
				CRB_ACPI_START_INDEX,
				NULL);
	if (!obj)
		return -ENXIO;
	rc = obj->integer.value == 0 ? 0 : -ENXIO;
	ACPI_FREE(obj);
	return rc;
}

static int crb_send(struct tpm_chip *chip, u8 *buf, size_t len)
{
	struct crb_priv *priv = chip->vendor.priv;
	int rc = 0;

	/* Zero the cancel register so that the next command will not get
	 * canceled.
	 */
	iowrite32(0, &priv->cca->cancel);

	if (len > le32_to_cpu(ioread32(&priv->cca->cmd_size))) {
		dev_err(&chip->dev,
			"invalid command count value %x %zx\n",
			(unsigned int) len,
			(size_t) le32_to_cpu(ioread32(&priv->cca->cmd_size)));
		return -E2BIG;
	}

	memcpy_toio(priv->cmd, buf, len);

	/* Make sure that cmd is populated before issuing start. */
	wmb();

	if (priv->flags & CRB_FL_CRB_START)
		iowrite32(cpu_to_le32(CRB_START_INVOKE), &priv->cca->start);

	if (priv->flags & CRB_FL_ACPI_START)
		rc = crb_do_acpi_start(chip);

	return rc;
}

static void crb_cancel(struct tpm_chip *chip)
{
	struct crb_priv *priv = chip->vendor.priv;

	iowrite32(cpu_to_le32(CRB_CANCEL_INVOKE), &priv->cca->cancel);

	/* Make sure that cmd is populated before issuing cancel. */
	wmb();

	if ((priv->flags & CRB_FL_ACPI_START) && crb_do_acpi_start(chip))
		dev_err(&chip->dev, "ACPI Start failed\n");
}

static bool crb_req_canceled(struct tpm_chip *chip, u8 status)
{
	struct crb_priv *priv = chip->vendor.priv;
	u32 cancel = le32_to_cpu(ioread32(&priv->cca->cancel));

	return (cancel & CRB_CANCEL_INVOKE) == CRB_CANCEL_INVOKE;
}

static const struct tpm_class_ops tpm_crb = {
	.status = crb_status,
	.recv = crb_recv,
	.send = crb_send,
	.cancel = crb_cancel,
	.req_canceled = crb_req_canceled,
	.req_complete_mask = CRB_STS_COMPLETE,
	.req_complete_val = CRB_STS_COMPLETE,
};

static int crb_acpi_add(struct acpi_device *device)
{
	struct tpm_chip *chip;
	struct acpi_tpm2 *buf;
	struct crb_priv *priv;
	struct device *dev = &device->dev;
	acpi_status status;
	u32 sm;
	u64 pa;
	int rc;

	status = acpi_get_table(ACPI_SIG_TPM2, 1,
				(struct acpi_table_header **) &buf);
	if (ACPI_FAILURE(status)) {
		dev_err(dev, "failed to get TPM2 ACPI table\n");
		return -ENODEV;
	}

	/* Should the FIFO driver handle this? */
	if (buf->start_method == TPM2_START_FIFO)
		return -ENODEV;

	chip = tpmm_chip_alloc(dev, &tpm_crb);
	if (IS_ERR(chip))
		return PTR_ERR(chip);

	chip->flags = TPM_CHIP_FLAG_TPM2;

	if (buf->hdr.length < sizeof(struct acpi_tpm2)) {
		dev_err(dev, "TPM2 ACPI table has wrong size");
		return -EINVAL;
	}

	priv = (struct crb_priv *) devm_kzalloc(dev, sizeof(struct crb_priv),
						GFP_KERNEL);
	if (!priv) {
		dev_err(dev, "failed to devm_kzalloc for private data\n");
		return -ENOMEM;
	}

	sm = le32_to_cpu(buf->start_method);

	/* The reason for the extra quirk is that the PTT in 4th Gen Core CPUs
	 * report only ACPI start but in practice seems to require both
	 * ACPI start and CRB start.
	 */
	if (sm == TPM2_START_CRB || sm == TPM2_START_FIFO ||
	    !strcmp(acpi_device_hid(device), "MSFT0101"))
		priv->flags |= CRB_FL_CRB_START;

	if (sm == TPM2_START_ACPI || sm == TPM2_START_CRB_WITH_ACPI)
		priv->flags |= CRB_FL_ACPI_START;

	priv->cca = (struct crb_control_area __iomem *)
		devm_ioremap_nocache(dev, buf->control_area_pa, 0x1000);
	if (!priv->cca) {
		dev_err(dev, "ioremap of the control area failed\n");
		return -ENOMEM;
	}

	pa = ((u64) le32_to_cpu(ioread32(&priv->cca->cmd_pa_high)) << 32) |
		(u64) le32_to_cpu(ioread32(&priv->cca->cmd_pa_low));
	priv->cmd = devm_ioremap_nocache(dev, pa,
					 ioread32(&priv->cca->cmd_size));
	if (!priv->cmd) {
		dev_err(dev, "ioremap of the command buffer failed\n");
		return -ENOMEM;
	}

	memcpy_fromio(&pa, &priv->cca->rsp_pa, 8);
	pa = le64_to_cpu(pa);
	priv->rsp = devm_ioremap_nocache(dev, pa,
					 ioread32(&priv->cca->rsp_size));
	if (!priv->rsp) {
		dev_err(dev, "ioremap of the response buffer failed\n");
		return -ENOMEM;
	}

	chip->vendor.priv = priv;

	/* Default timeouts and durations */
	chip->vendor.timeout_a = msecs_to_jiffies(TPM2_TIMEOUT_A);
	chip->vendor.timeout_b = msecs_to_jiffies(TPM2_TIMEOUT_B);
	chip->vendor.timeout_c = msecs_to_jiffies(TPM2_TIMEOUT_C);
	chip->vendor.timeout_d = msecs_to_jiffies(TPM2_TIMEOUT_D);
	chip->vendor.duration[TPM_SHORT] =
		msecs_to_jiffies(TPM2_DURATION_SHORT);
	chip->vendor.duration[TPM_MEDIUM] =
		msecs_to_jiffies(TPM2_DURATION_MEDIUM);
	chip->vendor.duration[TPM_LONG] =
		msecs_to_jiffies(TPM2_DURATION_LONG);

	chip->acpi_dev_handle = device->handle;

	rc = tpm2_do_selftest(chip);
	if (rc)
		return rc;

	return tpm_chip_register(chip);
}

static int crb_acpi_remove(struct acpi_device *device)
{
	struct device *dev = &device->dev;
	struct tpm_chip *chip = dev_get_drvdata(dev);

	if (chip->flags & TPM_CHIP_FLAG_TPM2)
		tpm2_shutdown(chip, TPM2_SU_CLEAR);

	tpm_chip_unregister(chip);

	return 0;
}

static struct acpi_device_id crb_device_ids[] = {
	{"MSFT0101", 0},
	{"", 0},
};
MODULE_DEVICE_TABLE(acpi, crb_device_ids);

static struct acpi_driver crb_acpi_driver = {
	.name = "tpm_crb",
	.ids = crb_device_ids,
	.ops = {
		.add = crb_acpi_add,
		.remove = crb_acpi_remove,
	},
	.drv = {
		.pm = &crb_pm,
	},
};

module_acpi_driver(crb_acpi_driver);
MODULE_AUTHOR("Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>");
MODULE_DESCRIPTION("TPM2 Driver");
MODULE_VERSION("0.1");
MODULE_LICENSE("GPL");