123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170 |
- /*
- * cpufreq driver for the cell processor
- *
- * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007
- *
- * Author: Christian Krafft <krafft@de.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
- #include <linux/cpufreq.h>
- #include <linux/module.h>
- #include <linux/of_platform.h>
- #include <asm/machdep.h>
- #include <asm/prom.h>
- #include <asm/cell-regs.h>
- #include "ppc_cbe_cpufreq.h"
- /* the CBE supports an 8 step frequency scaling */
- static struct cpufreq_frequency_table cbe_freqs[] = {
- {0, 1, 0},
- {0, 2, 0},
- {0, 3, 0},
- {0, 4, 0},
- {0, 5, 0},
- {0, 6, 0},
- {0, 8, 0},
- {0, 10, 0},
- {0, 0, CPUFREQ_TABLE_END},
- };
- /*
- * hardware specific functions
- */
- static int set_pmode(unsigned int cpu, unsigned int slow_mode)
- {
- int rc;
- if (cbe_cpufreq_has_pmi)
- rc = cbe_cpufreq_set_pmode_pmi(cpu, slow_mode);
- else
- rc = cbe_cpufreq_set_pmode(cpu, slow_mode);
- pr_debug("register contains slow mode %d\n", cbe_cpufreq_get_pmode(cpu));
- return rc;
- }
- /*
- * cpufreq functions
- */
- static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy)
- {
- struct cpufreq_frequency_table *pos;
- const u32 *max_freqp;
- u32 max_freq;
- int cur_pmode;
- struct device_node *cpu;
- cpu = of_get_cpu_node(policy->cpu, NULL);
- if (!cpu)
- return -ENODEV;
- pr_debug("init cpufreq on CPU %d\n", policy->cpu);
- /*
- * Let's check we can actually get to the CELL regs
- */
- if (!cbe_get_cpu_pmd_regs(policy->cpu) ||
- !cbe_get_cpu_mic_tm_regs(policy->cpu)) {
- pr_info("invalid CBE regs pointers for cpufreq\n");
- return -EINVAL;
- }
- max_freqp = of_get_property(cpu, "clock-frequency", NULL);
- of_node_put(cpu);
- if (!max_freqp)
- return -EINVAL;
- /* we need the freq in kHz */
- max_freq = *max_freqp / 1000;
- pr_debug("max clock-frequency is at %u kHz\n", max_freq);
- pr_debug("initializing frequency table\n");
- /* initialize frequency table */
- cpufreq_for_each_entry(pos, cbe_freqs) {
- pos->frequency = max_freq / pos->driver_data;
- pr_debug("%d: %d\n", (int)(pos - cbe_freqs), pos->frequency);
- }
- /* if DEBUG is enabled set_pmode() measures the latency
- * of a transition */
- policy->cpuinfo.transition_latency = 25000;
- cur_pmode = cbe_cpufreq_get_pmode(policy->cpu);
- pr_debug("current pmode is at %d\n",cur_pmode);
- policy->cur = cbe_freqs[cur_pmode].frequency;
- #ifdef CONFIG_SMP
- cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu));
- #endif
- /* this ensures that policy->cpuinfo_min
- * and policy->cpuinfo_max are set correctly */
- return cpufreq_table_validate_and_show(policy, cbe_freqs);
- }
- static int cbe_cpufreq_target(struct cpufreq_policy *policy,
- unsigned int cbe_pmode_new)
- {
- pr_debug("setting frequency for cpu %d to %d kHz, " \
- "1/%d of max frequency\n",
- policy->cpu,
- cbe_freqs[cbe_pmode_new].frequency,
- cbe_freqs[cbe_pmode_new].driver_data);
- return set_pmode(policy->cpu, cbe_pmode_new);
- }
- static struct cpufreq_driver cbe_cpufreq_driver = {
- .verify = cpufreq_generic_frequency_table_verify,
- .target_index = cbe_cpufreq_target,
- .init = cbe_cpufreq_cpu_init,
- .name = "cbe-cpufreq",
- .flags = CPUFREQ_CONST_LOOPS,
- };
- /*
- * module init and destoy
- */
- static int __init cbe_cpufreq_init(void)
- {
- if (!machine_is(cell))
- return -ENODEV;
- return cpufreq_register_driver(&cbe_cpufreq_driver);
- }
- static void __exit cbe_cpufreq_exit(void)
- {
- cpufreq_unregister_driver(&cbe_cpufreq_driver);
- }
- module_init(cbe_cpufreq_init);
- module_exit(cbe_cpufreq_exit);
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
|