123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180 |
- /*
- * drivers/extcon/extcon-adc-jack.c
- *
- * Analog Jack extcon driver with ADC-based detection capability.
- *
- * Copyright (C) 2012 Samsung Electronics
- * MyungJoo Ham <myungjoo.ham@samsung.com>
- *
- * Modified for calling to IIO to get adc by <anish.singh@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
- #include <linux/module.h>
- #include <linux/slab.h>
- #include <linux/device.h>
- #include <linux/platform_device.h>
- #include <linux/err.h>
- #include <linux/interrupt.h>
- #include <linux/workqueue.h>
- #include <linux/iio/consumer.h>
- #include <linux/extcon/extcon-adc-jack.h>
- #include <linux/extcon.h>
- /**
- * struct adc_jack_data - internal data for adc_jack device driver
- * @edev: extcon device.
- * @cable_names: list of supported cables.
- * @adc_conditions: list of adc value conditions.
- * @num_conditions: size of adc_conditions.
- * @irq: irq number of attach/detach event (0 if not exist).
- * @handling_delay: interrupt handler will schedule extcon event
- * handling at handling_delay jiffies.
- * @handler: extcon event handler called by interrupt handler.
- * @chan: iio channel being queried.
- */
- struct adc_jack_data {
- struct extcon_dev *edev;
- const unsigned int **cable_names;
- struct adc_jack_cond *adc_conditions;
- int num_conditions;
- int irq;
- unsigned long handling_delay; /* in jiffies */
- struct delayed_work handler;
- struct iio_channel *chan;
- };
- static void adc_jack_handler(struct work_struct *work)
- {
- struct adc_jack_data *data = container_of(to_delayed_work(work),
- struct adc_jack_data,
- handler);
- u32 state = 0;
- int ret, adc_val;
- int i;
- ret = iio_read_channel_raw(data->chan, &adc_val);
- if (ret < 0) {
- dev_err(&data->edev->dev, "read channel() error: %d\n", ret);
- return;
- }
- /* Get state from adc value with adc_conditions */
- for (i = 0; i < data->num_conditions; i++) {
- struct adc_jack_cond *def = &data->adc_conditions[i];
- if (!def->state)
- break;
- if (def->min_adc <= adc_val && def->max_adc >= adc_val) {
- state = def->state;
- break;
- }
- }
- /* if no def has met, it means state = 0 (no cables attached) */
- extcon_set_state(data->edev, state);
- }
- static irqreturn_t adc_jack_irq_thread(int irq, void *_data)
- {
- struct adc_jack_data *data = _data;
- queue_delayed_work(system_power_efficient_wq,
- &data->handler, data->handling_delay);
- return IRQ_HANDLED;
- }
- static int adc_jack_probe(struct platform_device *pdev)
- {
- struct adc_jack_data *data;
- struct adc_jack_pdata *pdata = dev_get_platdata(&pdev->dev);
- int i, err = 0;
- data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
- if (!pdata->cable_names) {
- dev_err(&pdev->dev, "error: cable_names not defined.\n");
- return -EINVAL;
- }
- data->edev = devm_extcon_dev_allocate(&pdev->dev, pdata->cable_names);
- if (IS_ERR(data->edev)) {
- dev_err(&pdev->dev, "failed to allocate extcon device\n");
- return -ENOMEM;
- }
- if (!pdata->adc_conditions ||
- !pdata->adc_conditions[0].state) {
- dev_err(&pdev->dev, "error: adc_conditions not defined.\n");
- return -EINVAL;
- }
- data->adc_conditions = pdata->adc_conditions;
- /* Check the length of array and set num_conditions */
- for (i = 0; data->adc_conditions[i].state; i++)
- ;
- data->num_conditions = i;
- data->chan = iio_channel_get(&pdev->dev, pdata->consumer_channel);
- if (IS_ERR(data->chan))
- return PTR_ERR(data->chan);
- data->handling_delay = msecs_to_jiffies(pdata->handling_delay_ms);
- INIT_DEFERRABLE_WORK(&data->handler, adc_jack_handler);
- platform_set_drvdata(pdev, data);
- err = devm_extcon_dev_register(&pdev->dev, data->edev);
- if (err)
- return err;
- data->irq = platform_get_irq(pdev, 0);
- if (!data->irq) {
- dev_err(&pdev->dev, "platform_get_irq failed\n");
- return -ENODEV;
- }
- err = request_any_context_irq(data->irq, adc_jack_irq_thread,
- pdata->irq_flags, pdata->name, data);
- if (err < 0) {
- dev_err(&pdev->dev, "error: irq %d\n", data->irq);
- return err;
- }
- return 0;
- }
- static int adc_jack_remove(struct platform_device *pdev)
- {
- struct adc_jack_data *data = platform_get_drvdata(pdev);
- free_irq(data->irq, data);
- cancel_work_sync(&data->handler.work);
- iio_channel_release(data->chan);
- return 0;
- }
- static struct platform_driver adc_jack_driver = {
- .probe = adc_jack_probe,
- .remove = adc_jack_remove,
- .driver = {
- .name = "adc-jack",
- },
- };
- module_platform_driver(adc_jack_driver);
- MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
- MODULE_DESCRIPTION("ADC Jack extcon driver");
- MODULE_LICENSE("GPL v2");
|