| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283 |
- menu "IEEE 1394 (FireWire) support"
- depends on HAS_DMA
- depends on PCI || COMPILE_TEST
- # firewire-core does not depend on PCI but is
- # not useful without PCI controller driver
- config FIREWIRE
- tristate "FireWire driver stack"
- select CRC_ITU_T
- help
- This is the new-generation IEEE 1394 (FireWire) driver stack
- a.k.a. Juju, a new implementation designed for robustness and
- simplicity.
- See http://ieee1394.wiki.kernel.org/index.php/Juju_Migration
- for information about migration from the older Linux 1394 stack
- to the new driver stack.
- To compile this driver as a module, say M here: the module will be
- called firewire-core.
- config FIREWIRE_OHCI
- tristate "OHCI-1394 controllers"
- depends on PCI && FIREWIRE && MMU
- help
- Enable this driver if you have a FireWire controller based
- on the OHCI specification. For all practical purposes, this
- is the only chipset in use, so say Y here.
- To compile this driver as a module, say M here: The module will be
- called firewire-ohci.
- config FIREWIRE_SBP2
- tristate "Storage devices (SBP-2 protocol)"
- depends on FIREWIRE && SCSI
- help
- This option enables you to use SBP-2 devices connected to a
- FireWire bus. SBP-2 devices include storage devices like
- harddisks and DVD drives, also some other FireWire devices
- like scanners.
- To compile this driver as a module, say M here: The module will be
- called firewire-sbp2.
- You should also enable support for disks, CD-ROMs, etc. in the SCSI
- configuration section.
- config FIREWIRE_NET
- tristate "IP networking over 1394"
- depends on FIREWIRE && INET
- help
- This enables IPv4/IPv6 over IEEE 1394, providing IP connectivity
- with other implementations of RFC 2734/3146 as found on several
- operating systems. Multicast support is currently limited.
- To compile this driver as a module, say M here: The module will be
- called firewire-net.
- config FIREWIRE_NOSY
- tristate "Nosy - a FireWire traffic sniffer for PCILynx cards"
- depends on PCI
- help
- Nosy is an IEEE 1394 packet sniffer that is used for protocol
- analysis and in development of IEEE 1394 drivers, applications,
- or firmwares.
- This driver lets you use a Texas Instruments PCILynx 1394 to PCI
- link layer controller TSB12LV21/A/B as a low-budget bus analyzer.
- PCILynx is a nowadays very rare IEEE 1394 controller which is
- not OHCI 1394 compliant.
- The following cards are known to be based on PCILynx or PCILynx-2:
- IOI IOI-1394TT (PCI card), Unibrain Fireboard 400 PCI Lynx-2
- (PCI card), Newer Technology FireWire 2 Go (CardBus card),
- Apple Power Mac G3 blue & white and G4 with PCI graphics
- (onboard controller).
- To compile this driver as a module, say M here: The module will be
- called nosy. Source code of a userspace interface to nosy, called
- nosy-dump, can be found in tools/firewire/ of the kernel sources.
- If unsure, say N.
- endmenu
|
