gpio-max7301.c 2.5 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107
  1. /*
  2. * Copyright (C) 2006 Juergen Beisert, Pengutronix
  3. * Copyright (C) 2008 Guennadi Liakhovetski, Pengutronix
  4. * Copyright (C) 2009 Wolfram Sang, Pengutronix
  5. *
  6. * This program is free software; you can redistribute it and/or modify
  7. * it under the terms of the GNU General Public License version 2 as
  8. * published by the Free Software Foundation.
  9. *
  10. * Check max730x.c for further details.
  11. */
  12. #include <linux/module.h>
  13. #include <linux/init.h>
  14. #include <linux/platform_device.h>
  15. #include <linux/mutex.h>
  16. #include <linux/slab.h>
  17. #include <linux/spi/spi.h>
  18. #include <linux/spi/max7301.h>
  19. /* A write to the MAX7301 means one message with one transfer */
  20. static int max7301_spi_write(struct device *dev, unsigned int reg,
  21. unsigned int val)
  22. {
  23. struct spi_device *spi = to_spi_device(dev);
  24. u16 word = ((reg & 0x7F) << 8) | (val & 0xFF);
  25. return spi_write_then_read(spi, &word, sizeof(word), NULL, 0);
  26. }
  27. /* A read from the MAX7301 means two transfers; here, one message each */
  28. static int max7301_spi_read(struct device *dev, unsigned int reg)
  29. {
  30. int ret;
  31. u16 word;
  32. struct spi_device *spi = to_spi_device(dev);
  33. word = 0x8000 | (reg << 8);
  34. ret = spi_write_then_read(spi, &word, sizeof(word), &word,
  35. sizeof(word));
  36. if (ret)
  37. return ret;
  38. return word & 0xff;
  39. }
  40. static int max7301_probe(struct spi_device *spi)
  41. {
  42. struct max7301 *ts;
  43. int ret;
  44. /* bits_per_word cannot be configured in platform data */
  45. spi->bits_per_word = 16;
  46. ret = spi_setup(spi);
  47. if (ret < 0)
  48. return ret;
  49. ts = devm_kzalloc(&spi->dev, sizeof(struct max7301), GFP_KERNEL);
  50. if (!ts)
  51. return -ENOMEM;
  52. ts->read = max7301_spi_read;
  53. ts->write = max7301_spi_write;
  54. ts->dev = &spi->dev;
  55. ret = __max730x_probe(ts);
  56. return ret;
  57. }
  58. static int max7301_remove(struct spi_device *spi)
  59. {
  60. return __max730x_remove(&spi->dev);
  61. }
  62. static const struct spi_device_id max7301_id[] = {
  63. { "max7301", 0 },
  64. { }
  65. };
  66. MODULE_DEVICE_TABLE(spi, max7301_id);
  67. static struct spi_driver max7301_driver = {
  68. .driver = {
  69. .name = "max7301",
  70. },
  71. .probe = max7301_probe,
  72. .remove = max7301_remove,
  73. .id_table = max7301_id,
  74. };
  75. static int __init max7301_init(void)
  76. {
  77. return spi_register_driver(&max7301_driver);
  78. }
  79. /* register after spi postcore initcall and before
  80. * subsys initcalls that may rely on these GPIOs
  81. */
  82. subsys_initcall(max7301_init);
  83. static void __exit max7301_exit(void)
  84. {
  85. spi_unregister_driver(&max7301_driver);
  86. }
  87. module_exit(max7301_exit);
  88. MODULE_AUTHOR("Juergen Beisert, Wolfram Sang");
  89. MODULE_LICENSE("GPL v2");
  90. MODULE_DESCRIPTION("MAX7301 GPIO-Expander");