123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379 |
- /*
- * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * Based on code from Freescale,
- * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
- #include <linux/err.h>
- #include <linux/init.h>
- #include <linux/interrupt.h>
- #include <linux/io.h>
- #include <linux/irq.h>
- #include <linux/irqdomain.h>
- #include <linux/gpio.h>
- #include <linux/of.h>
- #include <linux/of_address.h>
- #include <linux/of_device.h>
- #include <linux/platform_device.h>
- #include <linux/slab.h>
- #include <linux/basic_mmio_gpio.h>
- #include <linux/module.h>
- #define MXS_SET 0x4
- #define MXS_CLR 0x8
- #define PINCTRL_DOUT(p) ((is_imx23_gpio(p) ? 0x0500 : 0x0700) + (p->id) * 0x10)
- #define PINCTRL_DIN(p) ((is_imx23_gpio(p) ? 0x0600 : 0x0900) + (p->id) * 0x10)
- #define PINCTRL_DOE(p) ((is_imx23_gpio(p) ? 0x0700 : 0x0b00) + (p->id) * 0x10)
- #define PINCTRL_PIN2IRQ(p) ((is_imx23_gpio(p) ? 0x0800 : 0x1000) + (p->id) * 0x10)
- #define PINCTRL_IRQEN(p) ((is_imx23_gpio(p) ? 0x0900 : 0x1100) + (p->id) * 0x10)
- #define PINCTRL_IRQLEV(p) ((is_imx23_gpio(p) ? 0x0a00 : 0x1200) + (p->id) * 0x10)
- #define PINCTRL_IRQPOL(p) ((is_imx23_gpio(p) ? 0x0b00 : 0x1300) + (p->id) * 0x10)
- #define PINCTRL_IRQSTAT(p) ((is_imx23_gpio(p) ? 0x0c00 : 0x1400) + (p->id) * 0x10)
- #define GPIO_INT_FALL_EDGE 0x0
- #define GPIO_INT_LOW_LEV 0x1
- #define GPIO_INT_RISE_EDGE 0x2
- #define GPIO_INT_HIGH_LEV 0x3
- #define GPIO_INT_LEV_MASK (1 << 0)
- #define GPIO_INT_POL_MASK (1 << 1)
- enum mxs_gpio_id {
- IMX23_GPIO,
- IMX28_GPIO,
- };
- struct mxs_gpio_port {
- void __iomem *base;
- int id;
- int irq;
- struct irq_domain *domain;
- struct bgpio_chip bgc;
- enum mxs_gpio_id devid;
- u32 both_edges;
- };
- static inline int is_imx23_gpio(struct mxs_gpio_port *port)
- {
- return port->devid == IMX23_GPIO;
- }
- static inline int is_imx28_gpio(struct mxs_gpio_port *port)
- {
- return port->devid == IMX28_GPIO;
- }
- /* Note: This driver assumes 32 GPIOs are handled in one register */
- static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type)
- {
- u32 val;
- u32 pin_mask = 1 << d->hwirq;
- struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
- struct mxs_gpio_port *port = gc->private;
- void __iomem *pin_addr;
- int edge;
- port->both_edges &= ~pin_mask;
- switch (type) {
- case IRQ_TYPE_EDGE_BOTH:
- val = gpio_get_value(port->bgc.gc.base + d->hwirq);
- if (val)
- edge = GPIO_INT_FALL_EDGE;
- else
- edge = GPIO_INT_RISE_EDGE;
- port->both_edges |= pin_mask;
- break;
- case IRQ_TYPE_EDGE_RISING:
- edge = GPIO_INT_RISE_EDGE;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- edge = GPIO_INT_FALL_EDGE;
- break;
- case IRQ_TYPE_LEVEL_LOW:
- edge = GPIO_INT_LOW_LEV;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- edge = GPIO_INT_HIGH_LEV;
- break;
- default:
- return -EINVAL;
- }
- /* set level or edge */
- pin_addr = port->base + PINCTRL_IRQLEV(port);
- if (edge & GPIO_INT_LEV_MASK)
- writel(pin_mask, pin_addr + MXS_SET);
- else
- writel(pin_mask, pin_addr + MXS_CLR);
- /* set polarity */
- pin_addr = port->base + PINCTRL_IRQPOL(port);
- if (edge & GPIO_INT_POL_MASK)
- writel(pin_mask, pin_addr + MXS_SET);
- else
- writel(pin_mask, pin_addr + MXS_CLR);
- writel(pin_mask,
- port->base + PINCTRL_IRQSTAT(port) + MXS_CLR);
- return 0;
- }
- static void mxs_flip_edge(struct mxs_gpio_port *port, u32 gpio)
- {
- u32 bit, val, edge;
- void __iomem *pin_addr;
- bit = 1 << gpio;
- pin_addr = port->base + PINCTRL_IRQPOL(port);
- val = readl(pin_addr);
- edge = val & bit;
- if (edge)
- writel(bit, pin_addr + MXS_CLR);
- else
- writel(bit, pin_addr + MXS_SET);
- }
- /* MXS has one interrupt *per* gpio port */
- static void mxs_gpio_irq_handler(struct irq_desc *desc)
- {
- u32 irq_stat;
- struct mxs_gpio_port *port = irq_desc_get_handler_data(desc);
- desc->irq_data.chip->irq_ack(&desc->irq_data);
- irq_stat = readl(port->base + PINCTRL_IRQSTAT(port)) &
- readl(port->base + PINCTRL_IRQEN(port));
- while (irq_stat != 0) {
- int irqoffset = fls(irq_stat) - 1;
- if (port->both_edges & (1 << irqoffset))
- mxs_flip_edge(port, irqoffset);
- generic_handle_irq(irq_find_mapping(port->domain, irqoffset));
- irq_stat &= ~(1 << irqoffset);
- }
- }
- /*
- * Set interrupt number "irq" in the GPIO as a wake-up source.
- * While system is running, all registered GPIO interrupts need to have
- * wake-up enabled. When system is suspended, only selected GPIO interrupts
- * need to have wake-up enabled.
- * @param irq interrupt source number
- * @param enable enable as wake-up if equal to non-zero
- * @return This function returns 0 on success.
- */
- static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable)
- {
- struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
- struct mxs_gpio_port *port = gc->private;
- if (enable)
- enable_irq_wake(port->irq);
- else
- disable_irq_wake(port->irq);
- return 0;
- }
- static int __init mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base)
- {
- struct irq_chip_generic *gc;
- struct irq_chip_type *ct;
- gc = irq_alloc_generic_chip("gpio-mxs", 1, irq_base,
- port->base, handle_level_irq);
- if (!gc)
- return -ENOMEM;
- gc->private = port;
- ct = gc->chip_types;
- ct->chip.irq_ack = irq_gc_ack_set_bit;
- ct->chip.irq_mask = irq_gc_mask_clr_bit;
- ct->chip.irq_unmask = irq_gc_mask_set_bit;
- ct->chip.irq_set_type = mxs_gpio_set_irq_type;
- ct->chip.irq_set_wake = mxs_gpio_set_wake_irq;
- ct->regs.ack = PINCTRL_IRQSTAT(port) + MXS_CLR;
- ct->regs.mask = PINCTRL_IRQEN(port);
- irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_NESTED_LOCK,
- IRQ_NOREQUEST, 0);
- return 0;
- }
- static int mxs_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
- {
- struct bgpio_chip *bgc = to_bgpio_chip(gc);
- struct mxs_gpio_port *port =
- container_of(bgc, struct mxs_gpio_port, bgc);
- return irq_find_mapping(port->domain, offset);
- }
- static int mxs_gpio_get_direction(struct gpio_chip *gc, unsigned offset)
- {
- struct bgpio_chip *bgc = to_bgpio_chip(gc);
- struct mxs_gpio_port *port =
- container_of(bgc, struct mxs_gpio_port, bgc);
- u32 mask = 1 << offset;
- u32 dir;
- dir = readl(port->base + PINCTRL_DOE(port));
- return !(dir & mask);
- }
- static const struct platform_device_id mxs_gpio_ids[] = {
- {
- .name = "imx23-gpio",
- .driver_data = IMX23_GPIO,
- }, {
- .name = "imx28-gpio",
- .driver_data = IMX28_GPIO,
- }, {
- /* sentinel */
- }
- };
- MODULE_DEVICE_TABLE(platform, mxs_gpio_ids);
- static const struct of_device_id mxs_gpio_dt_ids[] = {
- { .compatible = "fsl,imx23-gpio", .data = (void *) IMX23_GPIO, },
- { .compatible = "fsl,imx28-gpio", .data = (void *) IMX28_GPIO, },
- { /* sentinel */ }
- };
- MODULE_DEVICE_TABLE(of, mxs_gpio_dt_ids);
- static int mxs_gpio_probe(struct platform_device *pdev)
- {
- const struct of_device_id *of_id =
- of_match_device(mxs_gpio_dt_ids, &pdev->dev);
- struct device_node *np = pdev->dev.of_node;
- struct device_node *parent;
- static void __iomem *base;
- struct mxs_gpio_port *port;
- int irq_base;
- int err;
- port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
- if (!port)
- return -ENOMEM;
- port->id = of_alias_get_id(np, "gpio");
- if (port->id < 0)
- return port->id;
- port->devid = (enum mxs_gpio_id) of_id->data;
- port->irq = platform_get_irq(pdev, 0);
- if (port->irq < 0)
- return port->irq;
- /*
- * map memory region only once, as all the gpio ports
- * share the same one
- */
- if (!base) {
- parent = of_get_parent(np);
- base = of_iomap(parent, 0);
- of_node_put(parent);
- if (!base)
- return -EADDRNOTAVAIL;
- }
- port->base = base;
- /*
- * select the pin interrupt functionality but initially
- * disable the interrupts
- */
- writel(~0U, port->base + PINCTRL_PIN2IRQ(port));
- writel(0, port->base + PINCTRL_IRQEN(port));
- /* clear address has to be used to clear IRQSTAT bits */
- writel(~0U, port->base + PINCTRL_IRQSTAT(port) + MXS_CLR);
- irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id());
- if (irq_base < 0)
- return irq_base;
- port->domain = irq_domain_add_legacy(np, 32, irq_base, 0,
- &irq_domain_simple_ops, NULL);
- if (!port->domain) {
- err = -ENODEV;
- goto out_irqdesc_free;
- }
- /* gpio-mxs can be a generic irq chip */
- err = mxs_gpio_init_gc(port, irq_base);
- if (err < 0)
- goto out_irqdomain_remove;
- /* setup one handler for each entry */
- irq_set_chained_handler_and_data(port->irq, mxs_gpio_irq_handler,
- port);
- err = bgpio_init(&port->bgc, &pdev->dev, 4,
- port->base + PINCTRL_DIN(port),
- port->base + PINCTRL_DOUT(port) + MXS_SET,
- port->base + PINCTRL_DOUT(port) + MXS_CLR,
- port->base + PINCTRL_DOE(port), NULL, 0);
- if (err)
- goto out_irqdesc_free;
- port->bgc.gc.to_irq = mxs_gpio_to_irq;
- port->bgc.gc.get_direction = mxs_gpio_get_direction;
- port->bgc.gc.base = port->id * 32;
- err = gpiochip_add(&port->bgc.gc);
- if (err)
- goto out_bgpio_remove;
- return 0;
- out_bgpio_remove:
- bgpio_remove(&port->bgc);
- out_irqdomain_remove:
- irq_domain_remove(port->domain);
- out_irqdesc_free:
- irq_free_descs(irq_base, 32);
- return err;
- }
- static struct platform_driver mxs_gpio_driver = {
- .driver = {
- .name = "gpio-mxs",
- .of_match_table = mxs_gpio_dt_ids,
- },
- .probe = mxs_gpio_probe,
- .id_table = mxs_gpio_ids,
- };
- static int __init mxs_gpio_init(void)
- {
- return platform_driver_register(&mxs_gpio_driver);
- }
- postcore_initcall(mxs_gpio_init);
- MODULE_AUTHOR("Freescale Semiconductor, "
- "Daniel Mack <danielncaiaq.de>, "
- "Juergen Beisert <kernel@pengutronix.de>");
- MODULE_DESCRIPTION("Freescale MXS GPIO");
- MODULE_LICENSE("GPL");
|