ide.c 10 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414
  1. /*
  2. * Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
  3. * Copyright (C) 2003-2005, 2007 Bartlomiej Zolnierkiewicz
  4. */
  5. /*
  6. * Mostly written by Mark Lord <mlord@pobox.com>
  7. * and Gadi Oxman <gadio@netvision.net.il>
  8. * and Andre Hedrick <andre@linux-ide.org>
  9. *
  10. * See linux/MAINTAINERS for address of current maintainer.
  11. *
  12. * This is the multiple IDE interface driver, as evolved from hd.c.
  13. * It supports up to MAX_HWIFS IDE interfaces, on one or more IRQs
  14. * (usually 14 & 15).
  15. * There can be up to two drives per interface, as per the ATA-2 spec.
  16. *
  17. * ...
  18. *
  19. * From hd.c:
  20. * |
  21. * | It traverses the request-list, using interrupts to jump between functions.
  22. * | As nearly all functions can be called within interrupts, we may not sleep.
  23. * | Special care is recommended. Have Fun!
  24. * |
  25. * | modified by Drew Eckhardt to check nr of hd's from the CMOS.
  26. * |
  27. * | Thanks to Branko Lankester, lankeste@fwi.uva.nl, who found a bug
  28. * | in the early extended-partition checks and added DM partitions.
  29. * |
  30. * | Early work on error handling by Mika Liljeberg (liljeber@cs.Helsinki.FI).
  31. * |
  32. * | IRQ-unmask, drive-id, multiple-mode, support for ">16 heads",
  33. * | and general streamlining by Mark Lord (mlord@pobox.com).
  34. *
  35. * October, 1994 -- Complete line-by-line overhaul for linux 1.1.x, by:
  36. *
  37. * Mark Lord (mlord@pobox.com) (IDE Perf.Pkg)
  38. * Delman Lee (delman@ieee.org) ("Mr. atdisk2")
  39. * Scott Snyder (snyder@fnald0.fnal.gov) (ATAPI IDE cd-rom)
  40. *
  41. * This was a rewrite of just about everything from hd.c, though some original
  42. * code is still sprinkled about. Think of it as a major evolution, with
  43. * inspiration from lots of linux users, esp. hamish@zot.apana.org.au
  44. */
  45. #include <linux/module.h>
  46. #include <linux/types.h>
  47. #include <linux/string.h>
  48. #include <linux/kernel.h>
  49. #include <linux/interrupt.h>
  50. #include <linux/major.h>
  51. #include <linux/errno.h>
  52. #include <linux/genhd.h>
  53. #include <linux/init.h>
  54. #include <linux/pci.h>
  55. #include <linux/ide.h>
  56. #include <linux/hdreg.h>
  57. #include <linux/completion.h>
  58. #include <linux/device.h>
  59. struct class *ide_port_class;
  60. /**
  61. * ide_device_get - get an additional reference to a ide_drive_t
  62. * @drive: device to get a reference to
  63. *
  64. * Gets a reference to the ide_drive_t and increments the use count of the
  65. * underlying LLDD module.
  66. */
  67. int ide_device_get(ide_drive_t *drive)
  68. {
  69. struct device *host_dev;
  70. struct module *module;
  71. if (!get_device(&drive->gendev))
  72. return -ENXIO;
  73. host_dev = drive->hwif->host->dev[0];
  74. module = host_dev ? host_dev->driver->owner : NULL;
  75. if (module && !try_module_get(module)) {
  76. put_device(&drive->gendev);
  77. return -ENXIO;
  78. }
  79. return 0;
  80. }
  81. EXPORT_SYMBOL_GPL(ide_device_get);
  82. /**
  83. * ide_device_put - release a reference to a ide_drive_t
  84. * @drive: device to release a reference on
  85. *
  86. * Release a reference to the ide_drive_t and decrements the use count of
  87. * the underlying LLDD module.
  88. */
  89. void ide_device_put(ide_drive_t *drive)
  90. {
  91. #ifdef CONFIG_MODULE_UNLOAD
  92. struct device *host_dev = drive->hwif->host->dev[0];
  93. struct module *module = host_dev ? host_dev->driver->owner : NULL;
  94. module_put(module);
  95. #endif
  96. put_device(&drive->gendev);
  97. }
  98. EXPORT_SYMBOL_GPL(ide_device_put);
  99. static int ide_bus_match(struct device *dev, struct device_driver *drv)
  100. {
  101. return 1;
  102. }
  103. static int ide_uevent(struct device *dev, struct kobj_uevent_env *env)
  104. {
  105. ide_drive_t *drive = to_ide_device(dev);
  106. add_uevent_var(env, "MEDIA=%s", ide_media_string(drive));
  107. add_uevent_var(env, "DRIVENAME=%s", drive->name);
  108. add_uevent_var(env, "MODALIAS=ide:m-%s", ide_media_string(drive));
  109. return 0;
  110. }
  111. static int generic_ide_probe(struct device *dev)
  112. {
  113. ide_drive_t *drive = to_ide_device(dev);
  114. struct ide_driver *drv = to_ide_driver(dev->driver);
  115. return drv->probe ? drv->probe(drive) : -ENODEV;
  116. }
  117. static int generic_ide_remove(struct device *dev)
  118. {
  119. ide_drive_t *drive = to_ide_device(dev);
  120. struct ide_driver *drv = to_ide_driver(dev->driver);
  121. if (drv->remove)
  122. drv->remove(drive);
  123. return 0;
  124. }
  125. static void generic_ide_shutdown(struct device *dev)
  126. {
  127. ide_drive_t *drive = to_ide_device(dev);
  128. struct ide_driver *drv = to_ide_driver(dev->driver);
  129. if (dev->driver && drv->shutdown)
  130. drv->shutdown(drive);
  131. }
  132. struct bus_type ide_bus_type = {
  133. .name = "ide",
  134. .match = ide_bus_match,
  135. .uevent = ide_uevent,
  136. .probe = generic_ide_probe,
  137. .remove = generic_ide_remove,
  138. .shutdown = generic_ide_shutdown,
  139. .dev_groups = ide_dev_groups,
  140. .suspend = generic_ide_suspend,
  141. .resume = generic_ide_resume,
  142. };
  143. EXPORT_SYMBOL_GPL(ide_bus_type);
  144. int ide_vlb_clk;
  145. EXPORT_SYMBOL_GPL(ide_vlb_clk);
  146. module_param_named(vlb_clock, ide_vlb_clk, int, 0);
  147. MODULE_PARM_DESC(vlb_clock, "VLB clock frequency (in MHz)");
  148. int ide_pci_clk;
  149. EXPORT_SYMBOL_GPL(ide_pci_clk);
  150. module_param_named(pci_clock, ide_pci_clk, int, 0);
  151. MODULE_PARM_DESC(pci_clock, "PCI bus clock frequency (in MHz)");
  152. static int ide_set_dev_param_mask(const char *s, const struct kernel_param *kp)
  153. {
  154. int a, b, i, j = 1;
  155. unsigned int *dev_param_mask = (unsigned int *)kp->arg;
  156. /* controller . device (0 or 1) [ : 1 (set) | 0 (clear) ] */
  157. if (sscanf(s, "%d.%d:%d", &a, &b, &j) != 3 &&
  158. sscanf(s, "%d.%d", &a, &b) != 2)
  159. return -EINVAL;
  160. i = a * MAX_DRIVES + b;
  161. if (i >= MAX_HWIFS * MAX_DRIVES || j < 0 || j > 1)
  162. return -EINVAL;
  163. if (j)
  164. *dev_param_mask |= (1 << i);
  165. else
  166. *dev_param_mask &= ~(1 << i);
  167. return 0;
  168. }
  169. static const struct kernel_param_ops param_ops_ide_dev_mask = {
  170. .set = ide_set_dev_param_mask
  171. };
  172. #define param_check_ide_dev_mask(name, p) param_check_uint(name, p)
  173. static unsigned int ide_nodma;
  174. module_param_named(nodma, ide_nodma, ide_dev_mask, 0);
  175. MODULE_PARM_DESC(nodma, "disallow DMA for a device");
  176. static unsigned int ide_noflush;
  177. module_param_named(noflush, ide_noflush, ide_dev_mask, 0);
  178. MODULE_PARM_DESC(noflush, "disable flush requests for a device");
  179. static unsigned int ide_nohpa;
  180. module_param_named(nohpa, ide_nohpa, ide_dev_mask, 0);
  181. MODULE_PARM_DESC(nohpa, "disable Host Protected Area for a device");
  182. static unsigned int ide_noprobe;
  183. module_param_named(noprobe, ide_noprobe, ide_dev_mask, 0);
  184. MODULE_PARM_DESC(noprobe, "skip probing for a device");
  185. static unsigned int ide_nowerr;
  186. module_param_named(nowerr, ide_nowerr, ide_dev_mask, 0);
  187. MODULE_PARM_DESC(nowerr, "ignore the ATA_DF bit for a device");
  188. static unsigned int ide_cdroms;
  189. module_param_named(cdrom, ide_cdroms, ide_dev_mask, 0);
  190. MODULE_PARM_DESC(cdrom, "force device as a CD-ROM");
  191. struct chs_geom {
  192. unsigned int cyl;
  193. u8 head;
  194. u8 sect;
  195. };
  196. static unsigned int ide_disks;
  197. static struct chs_geom ide_disks_chs[MAX_HWIFS * MAX_DRIVES];
  198. static int ide_set_disk_chs(const char *str, struct kernel_param *kp)
  199. {
  200. int a, b, c = 0, h = 0, s = 0, i, j = 1;
  201. /* controller . device (0 or 1) : Cylinders , Heads , Sectors */
  202. /* controller . device (0 or 1) : 1 (use CHS) | 0 (ignore CHS) */
  203. if (sscanf(str, "%d.%d:%d,%d,%d", &a, &b, &c, &h, &s) != 5 &&
  204. sscanf(str, "%d.%d:%d", &a, &b, &j) != 3)
  205. return -EINVAL;
  206. i = a * MAX_DRIVES + b;
  207. if (i >= MAX_HWIFS * MAX_DRIVES || j < 0 || j > 1)
  208. return -EINVAL;
  209. if (c > INT_MAX || h > 255 || s > 255)
  210. return -EINVAL;
  211. if (j)
  212. ide_disks |= (1 << i);
  213. else
  214. ide_disks &= ~(1 << i);
  215. ide_disks_chs[i].cyl = c;
  216. ide_disks_chs[i].head = h;
  217. ide_disks_chs[i].sect = s;
  218. return 0;
  219. }
  220. module_param_call(chs, ide_set_disk_chs, NULL, NULL, 0);
  221. MODULE_PARM_DESC(chs, "force device as a disk (using CHS)");
  222. static void ide_dev_apply_params(ide_drive_t *drive, u8 unit)
  223. {
  224. int i = drive->hwif->index * MAX_DRIVES + unit;
  225. if (ide_nodma & (1 << i)) {
  226. printk(KERN_INFO "ide: disallowing DMA for %s\n", drive->name);
  227. drive->dev_flags |= IDE_DFLAG_NODMA;
  228. }
  229. if (ide_noflush & (1 << i)) {
  230. printk(KERN_INFO "ide: disabling flush requests for %s\n",
  231. drive->name);
  232. drive->dev_flags |= IDE_DFLAG_NOFLUSH;
  233. }
  234. if (ide_nohpa & (1 << i)) {
  235. printk(KERN_INFO "ide: disabling Host Protected Area for %s\n",
  236. drive->name);
  237. drive->dev_flags |= IDE_DFLAG_NOHPA;
  238. }
  239. if (ide_noprobe & (1 << i)) {
  240. printk(KERN_INFO "ide: skipping probe for %s\n", drive->name);
  241. drive->dev_flags |= IDE_DFLAG_NOPROBE;
  242. }
  243. if (ide_nowerr & (1 << i)) {
  244. printk(KERN_INFO "ide: ignoring the ATA_DF bit for %s\n",
  245. drive->name);
  246. drive->bad_wstat = BAD_R_STAT;
  247. }
  248. if (ide_cdroms & (1 << i)) {
  249. printk(KERN_INFO "ide: forcing %s as a CD-ROM\n", drive->name);
  250. drive->dev_flags |= IDE_DFLAG_PRESENT;
  251. drive->media = ide_cdrom;
  252. /* an ATAPI device ignores DRDY */
  253. drive->ready_stat = 0;
  254. }
  255. if (ide_disks & (1 << i)) {
  256. drive->cyl = drive->bios_cyl = ide_disks_chs[i].cyl;
  257. drive->head = drive->bios_head = ide_disks_chs[i].head;
  258. drive->sect = drive->bios_sect = ide_disks_chs[i].sect;
  259. printk(KERN_INFO "ide: forcing %s as a disk (%d/%d/%d)\n",
  260. drive->name,
  261. drive->cyl, drive->head, drive->sect);
  262. drive->dev_flags |= IDE_DFLAG_FORCED_GEOM | IDE_DFLAG_PRESENT;
  263. drive->media = ide_disk;
  264. drive->ready_stat = ATA_DRDY;
  265. }
  266. }
  267. static unsigned int ide_ignore_cable;
  268. static int ide_set_ignore_cable(const char *s, struct kernel_param *kp)
  269. {
  270. int i, j = 1;
  271. /* controller (ignore) */
  272. /* controller : 1 (ignore) | 0 (use) */
  273. if (sscanf(s, "%d:%d", &i, &j) != 2 && sscanf(s, "%d", &i) != 1)
  274. return -EINVAL;
  275. if (i >= MAX_HWIFS || j < 0 || j > 1)
  276. return -EINVAL;
  277. if (j)
  278. ide_ignore_cable |= (1 << i);
  279. else
  280. ide_ignore_cable &= ~(1 << i);
  281. return 0;
  282. }
  283. module_param_call(ignore_cable, ide_set_ignore_cable, NULL, NULL, 0);
  284. MODULE_PARM_DESC(ignore_cable, "ignore cable detection");
  285. void ide_port_apply_params(ide_hwif_t *hwif)
  286. {
  287. ide_drive_t *drive;
  288. int i;
  289. if (ide_ignore_cable & (1 << hwif->index)) {
  290. printk(KERN_INFO "ide: ignoring cable detection for %s\n",
  291. hwif->name);
  292. hwif->cbl = ATA_CBL_PATA40_SHORT;
  293. }
  294. ide_port_for_each_dev(i, drive, hwif)
  295. ide_dev_apply_params(drive, i);
  296. }
  297. /*
  298. * This is gets invoked once during initialization, to set *everything* up
  299. */
  300. static int __init ide_init(void)
  301. {
  302. int ret;
  303. printk(KERN_INFO "Uniform Multi-Platform E-IDE driver\n");
  304. ret = bus_register(&ide_bus_type);
  305. if (ret < 0) {
  306. printk(KERN_WARNING "IDE: bus_register error: %d\n", ret);
  307. return ret;
  308. }
  309. ide_port_class = class_create(THIS_MODULE, "ide_port");
  310. if (IS_ERR(ide_port_class)) {
  311. ret = PTR_ERR(ide_port_class);
  312. goto out_port_class;
  313. }
  314. ide_acpi_init();
  315. proc_ide_create();
  316. return 0;
  317. out_port_class:
  318. bus_unregister(&ide_bus_type);
  319. return ret;
  320. }
  321. static void __exit ide_exit(void)
  322. {
  323. proc_ide_destroy();
  324. class_destroy(ide_port_class);
  325. bus_unregister(&ide_bus_type);
  326. }
  327. module_init(ide_init);
  328. module_exit(ide_exit);
  329. MODULE_LICENSE("GPL");