123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616 |
- /*
- * LP5562 LED driver
- *
- * Copyright (C) 2013 Texas Instruments
- *
- * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
- #include <linux/delay.h>
- #include <linux/firmware.h>
- #include <linux/i2c.h>
- #include <linux/leds.h>
- #include <linux/module.h>
- #include <linux/mutex.h>
- #include <linux/of.h>
- #include <linux/platform_data/leds-lp55xx.h>
- #include <linux/slab.h>
- #include "leds-lp55xx-common.h"
- #define LP5562_PROGRAM_LENGTH 32
- #define LP5562_MAX_LEDS 4
- /* ENABLE Register 00h */
- #define LP5562_REG_ENABLE 0x00
- #define LP5562_EXEC_ENG1_M 0x30
- #define LP5562_EXEC_ENG2_M 0x0C
- #define LP5562_EXEC_ENG3_M 0x03
- #define LP5562_EXEC_M 0x3F
- #define LP5562_MASTER_ENABLE 0x40 /* Chip master enable */
- #define LP5562_LOGARITHMIC_PWM 0x80 /* Logarithmic PWM adjustment */
- #define LP5562_EXEC_RUN 0x2A
- #define LP5562_ENABLE_DEFAULT \
- (LP5562_MASTER_ENABLE | LP5562_LOGARITHMIC_PWM)
- #define LP5562_ENABLE_RUN_PROGRAM \
- (LP5562_ENABLE_DEFAULT | LP5562_EXEC_RUN)
- /* OPMODE Register 01h */
- #define LP5562_REG_OP_MODE 0x01
- #define LP5562_MODE_ENG1_M 0x30
- #define LP5562_MODE_ENG2_M 0x0C
- #define LP5562_MODE_ENG3_M 0x03
- #define LP5562_LOAD_ENG1 0x10
- #define LP5562_LOAD_ENG2 0x04
- #define LP5562_LOAD_ENG3 0x01
- #define LP5562_RUN_ENG1 0x20
- #define LP5562_RUN_ENG2 0x08
- #define LP5562_RUN_ENG3 0x02
- #define LP5562_ENG1_IS_LOADING(mode) \
- ((mode & LP5562_MODE_ENG1_M) == LP5562_LOAD_ENG1)
- #define LP5562_ENG2_IS_LOADING(mode) \
- ((mode & LP5562_MODE_ENG2_M) == LP5562_LOAD_ENG2)
- #define LP5562_ENG3_IS_LOADING(mode) \
- ((mode & LP5562_MODE_ENG3_M) == LP5562_LOAD_ENG3)
- /* BRIGHTNESS Registers */
- #define LP5562_REG_R_PWM 0x04
- #define LP5562_REG_G_PWM 0x03
- #define LP5562_REG_B_PWM 0x02
- #define LP5562_REG_W_PWM 0x0E
- /* CURRENT Registers */
- #define LP5562_REG_R_CURRENT 0x07
- #define LP5562_REG_G_CURRENT 0x06
- #define LP5562_REG_B_CURRENT 0x05
- #define LP5562_REG_W_CURRENT 0x0F
- /* CONFIG Register 08h */
- #define LP5562_REG_CONFIG 0x08
- #define LP5562_PWM_HF 0x40
- #define LP5562_PWRSAVE_EN 0x20
- #define LP5562_CLK_INT 0x01 /* Internal clock */
- #define LP5562_DEFAULT_CFG (LP5562_PWM_HF | LP5562_PWRSAVE_EN)
- /* RESET Register 0Dh */
- #define LP5562_REG_RESET 0x0D
- #define LP5562_RESET 0xFF
- /* PROGRAM ENGINE Registers */
- #define LP5562_REG_PROG_MEM_ENG1 0x10
- #define LP5562_REG_PROG_MEM_ENG2 0x30
- #define LP5562_REG_PROG_MEM_ENG3 0x50
- /* LEDMAP Register 70h */
- #define LP5562_REG_ENG_SEL 0x70
- #define LP5562_ENG_SEL_PWM 0
- #define LP5562_ENG_FOR_RGB_M 0x3F
- #define LP5562_ENG_SEL_RGB 0x1B /* R:ENG1, G:ENG2, B:ENG3 */
- #define LP5562_ENG_FOR_W_M 0xC0
- #define LP5562_ENG1_FOR_W 0x40 /* W:ENG1 */
- #define LP5562_ENG2_FOR_W 0x80 /* W:ENG2 */
- #define LP5562_ENG3_FOR_W 0xC0 /* W:ENG3 */
- /* Program Commands */
- #define LP5562_CMD_DISABLE 0x00
- #define LP5562_CMD_LOAD 0x15
- #define LP5562_CMD_RUN 0x2A
- #define LP5562_CMD_DIRECT 0x3F
- #define LP5562_PATTERN_OFF 0
- static inline void lp5562_wait_opmode_done(void)
- {
- /* operation mode change needs to be longer than 153 us */
- usleep_range(200, 300);
- }
- static inline void lp5562_wait_enable_done(void)
- {
- /* it takes more 488 us to update ENABLE register */
- usleep_range(500, 600);
- }
- static void lp5562_set_led_current(struct lp55xx_led *led, u8 led_current)
- {
- u8 addr[] = {
- LP5562_REG_R_CURRENT,
- LP5562_REG_G_CURRENT,
- LP5562_REG_B_CURRENT,
- LP5562_REG_W_CURRENT,
- };
- led->led_current = led_current;
- lp55xx_write(led->chip, addr[led->chan_nr], led_current);
- }
- static void lp5562_load_engine(struct lp55xx_chip *chip)
- {
- enum lp55xx_engine_index idx = chip->engine_idx;
- u8 mask[] = {
- [LP55XX_ENGINE_1] = LP5562_MODE_ENG1_M,
- [LP55XX_ENGINE_2] = LP5562_MODE_ENG2_M,
- [LP55XX_ENGINE_3] = LP5562_MODE_ENG3_M,
- };
- u8 val[] = {
- [LP55XX_ENGINE_1] = LP5562_LOAD_ENG1,
- [LP55XX_ENGINE_2] = LP5562_LOAD_ENG2,
- [LP55XX_ENGINE_3] = LP5562_LOAD_ENG3,
- };
- lp55xx_update_bits(chip, LP5562_REG_OP_MODE, mask[idx], val[idx]);
- lp5562_wait_opmode_done();
- }
- static void lp5562_stop_engine(struct lp55xx_chip *chip)
- {
- lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DISABLE);
- lp5562_wait_opmode_done();
- }
- static void lp5562_run_engine(struct lp55xx_chip *chip, bool start)
- {
- int ret;
- u8 mode;
- u8 exec;
- /* stop engine */
- if (!start) {
- lp55xx_write(chip, LP5562_REG_ENABLE, LP5562_ENABLE_DEFAULT);
- lp5562_wait_enable_done();
- lp5562_stop_engine(chip);
- lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM);
- lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT);
- lp5562_wait_opmode_done();
- return;
- }
- /*
- * To run the engine,
- * operation mode and enable register should updated at the same time
- */
- ret = lp55xx_read(chip, LP5562_REG_OP_MODE, &mode);
- if (ret)
- return;
- ret = lp55xx_read(chip, LP5562_REG_ENABLE, &exec);
- if (ret)
- return;
- /* change operation mode to RUN only when each engine is loading */
- if (LP5562_ENG1_IS_LOADING(mode)) {
- mode = (mode & ~LP5562_MODE_ENG1_M) | LP5562_RUN_ENG1;
- exec = (exec & ~LP5562_EXEC_ENG1_M) | LP5562_RUN_ENG1;
- }
- if (LP5562_ENG2_IS_LOADING(mode)) {
- mode = (mode & ~LP5562_MODE_ENG2_M) | LP5562_RUN_ENG2;
- exec = (exec & ~LP5562_EXEC_ENG2_M) | LP5562_RUN_ENG2;
- }
- if (LP5562_ENG3_IS_LOADING(mode)) {
- mode = (mode & ~LP5562_MODE_ENG3_M) | LP5562_RUN_ENG3;
- exec = (exec & ~LP5562_EXEC_ENG3_M) | LP5562_RUN_ENG3;
- }
- lp55xx_write(chip, LP5562_REG_OP_MODE, mode);
- lp5562_wait_opmode_done();
- lp55xx_update_bits(chip, LP5562_REG_ENABLE, LP5562_EXEC_M, exec);
- lp5562_wait_enable_done();
- }
- static int lp5562_update_firmware(struct lp55xx_chip *chip,
- const u8 *data, size_t size)
- {
- enum lp55xx_engine_index idx = chip->engine_idx;
- u8 pattern[LP5562_PROGRAM_LENGTH] = {0};
- u8 addr[] = {
- [LP55XX_ENGINE_1] = LP5562_REG_PROG_MEM_ENG1,
- [LP55XX_ENGINE_2] = LP5562_REG_PROG_MEM_ENG2,
- [LP55XX_ENGINE_3] = LP5562_REG_PROG_MEM_ENG3,
- };
- unsigned cmd;
- char c[3];
- int program_size;
- int nrchars;
- int offset = 0;
- int ret;
- int i;
- /* clear program memory before updating */
- for (i = 0; i < LP5562_PROGRAM_LENGTH; i++)
- lp55xx_write(chip, addr[idx] + i, 0);
- i = 0;
- while ((offset < size - 1) && (i < LP5562_PROGRAM_LENGTH)) {
- /* separate sscanfs because length is working only for %s */
- ret = sscanf(data + offset, "%2s%n ", c, &nrchars);
- if (ret != 1)
- goto err;
- ret = sscanf(c, "%2x", &cmd);
- if (ret != 1)
- goto err;
- pattern[i] = (u8)cmd;
- offset += nrchars;
- i++;
- }
- /* Each instruction is 16bit long. Check that length is even */
- if (i % 2)
- goto err;
- program_size = i;
- for (i = 0; i < program_size; i++)
- lp55xx_write(chip, addr[idx] + i, pattern[i]);
- return 0;
- err:
- dev_err(&chip->cl->dev, "wrong pattern format\n");
- return -EINVAL;
- }
- static void lp5562_firmware_loaded(struct lp55xx_chip *chip)
- {
- const struct firmware *fw = chip->fw;
- if (fw->size > LP5562_PROGRAM_LENGTH) {
- dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
- fw->size);
- return;
- }
- /*
- * Program momery sequence
- * 1) set engine mode to "LOAD"
- * 2) write firmware data into program memory
- */
- lp5562_load_engine(chip);
- lp5562_update_firmware(chip, fw->data, fw->size);
- }
- static int lp5562_post_init_device(struct lp55xx_chip *chip)
- {
- int ret;
- u8 cfg = LP5562_DEFAULT_CFG;
- /* Set all PWMs to direct control mode */
- ret = lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT);
- if (ret)
- return ret;
- lp5562_wait_opmode_done();
- /* Update configuration for the clock setting */
- if (!lp55xx_is_extclk_used(chip))
- cfg |= LP5562_CLK_INT;
- ret = lp55xx_write(chip, LP5562_REG_CONFIG, cfg);
- if (ret)
- return ret;
- /* Initialize all channels PWM to zero -> leds off */
- lp55xx_write(chip, LP5562_REG_R_PWM, 0);
- lp55xx_write(chip, LP5562_REG_G_PWM, 0);
- lp55xx_write(chip, LP5562_REG_B_PWM, 0);
- lp55xx_write(chip, LP5562_REG_W_PWM, 0);
- /* Set LED map as register PWM by default */
- lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM);
- return 0;
- }
- static void lp5562_led_brightness_work(struct work_struct *work)
- {
- struct lp55xx_led *led = container_of(work, struct lp55xx_led,
- brightness_work);
- struct lp55xx_chip *chip = led->chip;
- u8 addr[] = {
- LP5562_REG_R_PWM,
- LP5562_REG_G_PWM,
- LP5562_REG_B_PWM,
- LP5562_REG_W_PWM,
- };
- mutex_lock(&chip->lock);
- lp55xx_write(chip, addr[led->chan_nr], led->brightness);
- mutex_unlock(&chip->lock);
- }
- static void lp5562_write_program_memory(struct lp55xx_chip *chip,
- u8 base, const u8 *rgb, int size)
- {
- int i;
- if (!rgb || size <= 0)
- return;
- for (i = 0; i < size; i++)
- lp55xx_write(chip, base + i, *(rgb + i));
- lp55xx_write(chip, base + i, 0);
- lp55xx_write(chip, base + i + 1, 0);
- }
- /* check the size of program count */
- static inline bool _is_pc_overflow(struct lp55xx_predef_pattern *ptn)
- {
- return ptn->size_r >= LP5562_PROGRAM_LENGTH ||
- ptn->size_g >= LP5562_PROGRAM_LENGTH ||
- ptn->size_b >= LP5562_PROGRAM_LENGTH;
- }
- static int lp5562_run_predef_led_pattern(struct lp55xx_chip *chip, int mode)
- {
- struct lp55xx_predef_pattern *ptn;
- int i;
- if (mode == LP5562_PATTERN_OFF) {
- lp5562_run_engine(chip, false);
- return 0;
- }
- ptn = chip->pdata->patterns + (mode - 1);
- if (!ptn || _is_pc_overflow(ptn)) {
- dev_err(&chip->cl->dev, "invalid pattern data\n");
- return -EINVAL;
- }
- lp5562_stop_engine(chip);
- /* Set LED map as RGB */
- lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_RGB);
- /* Load engines */
- for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) {
- chip->engine_idx = i;
- lp5562_load_engine(chip);
- }
- /* Clear program registers */
- lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1, 0);
- lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1 + 1, 0);
- lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2, 0);
- lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2 + 1, 0);
- lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3, 0);
- lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3 + 1, 0);
- /* Program engines */
- lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG1,
- ptn->r, ptn->size_r);
- lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG2,
- ptn->g, ptn->size_g);
- lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG3,
- ptn->b, ptn->size_b);
- /* Run engines */
- lp5562_run_engine(chip, true);
- return 0;
- }
- static ssize_t lp5562_store_pattern(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t len)
- {
- struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
- struct lp55xx_chip *chip = led->chip;
- struct lp55xx_predef_pattern *ptn = chip->pdata->patterns;
- int num_patterns = chip->pdata->num_patterns;
- unsigned long mode;
- int ret;
- ret = kstrtoul(buf, 0, &mode);
- if (ret)
- return ret;
- if (mode > num_patterns || !ptn)
- return -EINVAL;
- mutex_lock(&chip->lock);
- ret = lp5562_run_predef_led_pattern(chip, mode);
- mutex_unlock(&chip->lock);
- if (ret)
- return ret;
- return len;
- }
- static ssize_t lp5562_store_engine_mux(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t len)
- {
- struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
- struct lp55xx_chip *chip = led->chip;
- u8 mask;
- u8 val;
- /* LED map
- * R ... Engine 1 (fixed)
- * G ... Engine 2 (fixed)
- * B ... Engine 3 (fixed)
- * W ... Engine 1 or 2 or 3
- */
- if (sysfs_streq(buf, "RGB")) {
- mask = LP5562_ENG_FOR_RGB_M;
- val = LP5562_ENG_SEL_RGB;
- } else if (sysfs_streq(buf, "W")) {
- enum lp55xx_engine_index idx = chip->engine_idx;
- mask = LP5562_ENG_FOR_W_M;
- switch (idx) {
- case LP55XX_ENGINE_1:
- val = LP5562_ENG1_FOR_W;
- break;
- case LP55XX_ENGINE_2:
- val = LP5562_ENG2_FOR_W;
- break;
- case LP55XX_ENGINE_3:
- val = LP5562_ENG3_FOR_W;
- break;
- default:
- return -EINVAL;
- }
- } else {
- dev_err(dev, "choose RGB or W\n");
- return -EINVAL;
- }
- mutex_lock(&chip->lock);
- lp55xx_update_bits(chip, LP5562_REG_ENG_SEL, mask, val);
- mutex_unlock(&chip->lock);
- return len;
- }
- static LP55XX_DEV_ATTR_WO(led_pattern, lp5562_store_pattern);
- static LP55XX_DEV_ATTR_WO(engine_mux, lp5562_store_engine_mux);
- static struct attribute *lp5562_attributes[] = {
- &dev_attr_led_pattern.attr,
- &dev_attr_engine_mux.attr,
- NULL,
- };
- static const struct attribute_group lp5562_group = {
- .attrs = lp5562_attributes,
- };
- /* Chip specific configurations */
- static struct lp55xx_device_config lp5562_cfg = {
- .max_channel = LP5562_MAX_LEDS,
- .reset = {
- .addr = LP5562_REG_RESET,
- .val = LP5562_RESET,
- },
- .enable = {
- .addr = LP5562_REG_ENABLE,
- .val = LP5562_ENABLE_DEFAULT,
- },
- .post_init_device = lp5562_post_init_device,
- .set_led_current = lp5562_set_led_current,
- .brightness_work_fn = lp5562_led_brightness_work,
- .run_engine = lp5562_run_engine,
- .firmware_cb = lp5562_firmware_loaded,
- .dev_attr_group = &lp5562_group,
- };
- static int lp5562_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
- {
- int ret;
- struct lp55xx_chip *chip;
- struct lp55xx_led *led;
- struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev);
- struct device_node *np = client->dev.of_node;
- if (!pdata) {
- if (np) {
- pdata = lp55xx_of_populate_pdata(&client->dev, np);
- if (IS_ERR(pdata))
- return PTR_ERR(pdata);
- } else {
- dev_err(&client->dev, "no platform data\n");
- return -EINVAL;
- }
- }
- chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
- if (!chip)
- return -ENOMEM;
- led = devm_kzalloc(&client->dev,
- sizeof(*led) * pdata->num_channels, GFP_KERNEL);
- if (!led)
- return -ENOMEM;
- chip->cl = client;
- chip->pdata = pdata;
- chip->cfg = &lp5562_cfg;
- mutex_init(&chip->lock);
- i2c_set_clientdata(client, led);
- ret = lp55xx_init_device(chip);
- if (ret)
- goto err_init;
- ret = lp55xx_register_leds(led, chip);
- if (ret)
- goto err_register_leds;
- ret = lp55xx_register_sysfs(chip);
- if (ret) {
- dev_err(&client->dev, "registering sysfs failed\n");
- goto err_register_sysfs;
- }
- return 0;
- err_register_sysfs:
- lp55xx_unregister_leds(led, chip);
- err_register_leds:
- lp55xx_deinit_device(chip);
- err_init:
- return ret;
- }
- static int lp5562_remove(struct i2c_client *client)
- {
- struct lp55xx_led *led = i2c_get_clientdata(client);
- struct lp55xx_chip *chip = led->chip;
- lp5562_stop_engine(chip);
- lp55xx_unregister_sysfs(chip);
- lp55xx_unregister_leds(led, chip);
- lp55xx_deinit_device(chip);
- return 0;
- }
- static const struct i2c_device_id lp5562_id[] = {
- { "lp5562", 0 },
- { }
- };
- MODULE_DEVICE_TABLE(i2c, lp5562_id);
- #ifdef CONFIG_OF
- static const struct of_device_id of_lp5562_leds_match[] = {
- { .compatible = "ti,lp5562", },
- {},
- };
- MODULE_DEVICE_TABLE(of, of_lp5562_leds_match);
- #endif
- static struct i2c_driver lp5562_driver = {
- .driver = {
- .name = "lp5562",
- .of_match_table = of_match_ptr(of_lp5562_leds_match),
- },
- .probe = lp5562_probe,
- .remove = lp5562_remove,
- .id_table = lp5562_id,
- };
- module_i2c_driver(lp5562_driver);
- MODULE_DESCRIPTION("Texas Instruments LP5562 LED Driver");
- MODULE_AUTHOR("Milo Kim");
- MODULE_LICENSE("GPL");
|