123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159 |
- #ifndef _RAID10_H
- #define _RAID10_H
- struct raid10_info {
- struct md_rdev *rdev, *replacement;
- sector_t head_position;
- int recovery_disabled; /* matches
- * mddev->recovery_disabled
- * when we shouldn't try
- * recovering this device.
- */
- };
- struct r10conf {
- struct mddev *mddev;
- struct raid10_info *mirrors;
- struct raid10_info *mirrors_new, *mirrors_old;
- spinlock_t device_lock;
- /* geometry */
- struct geom {
- int raid_disks;
- int near_copies; /* number of copies laid out
- * raid0 style */
- int far_copies; /* number of copies laid out
- * at large strides across drives
- */
- int far_offset; /* far_copies are offset by 1
- * stripe instead of many
- */
- sector_t stride; /* distance between far copies.
- * This is size / far_copies unless
- * far_offset, in which case it is
- * 1 stripe.
- */
- int far_set_size; /* The number of devices in a set,
- * where a 'set' are devices that
- * contain far/offset copies of
- * each other.
- */
- int chunk_shift; /* shift from chunks to sectors */
- sector_t chunk_mask;
- } prev, geo;
- int copies; /* near_copies * far_copies.
- * must be <= raid_disks
- */
- sector_t dev_sectors; /* temp copy of
- * mddev->dev_sectors */
- sector_t reshape_progress;
- sector_t reshape_safe;
- unsigned long reshape_checkpoint;
- sector_t offset_diff;
- struct list_head retry_list;
- /* A separate list of r1bio which just need raid_end_bio_io called.
- * This mustn't happen for writes which had any errors if the superblock
- * needs to be written.
- */
- struct list_head bio_end_io_list;
- /* queue pending writes and submit them on unplug */
- struct bio_list pending_bio_list;
- int pending_count;
- spinlock_t resync_lock;
- int nr_pending;
- int nr_waiting;
- int nr_queued;
- int barrier;
- sector_t next_resync;
- int fullsync; /* set to 1 if a full sync is needed,
- * (fresh device added).
- * Cleared when a sync completes.
- */
- int have_replacement; /* There is at least one
- * replacement device.
- */
- wait_queue_head_t wait_barrier;
- mempool_t *r10bio_pool;
- mempool_t *r10buf_pool;
- struct page *tmppage;
- /* When taking over an array from a different personality, we store
- * the new thread here until we fully activate the array.
- */
- struct md_thread *thread;
- };
- /*
- * this is our 'private' RAID10 bio.
- *
- * it contains information about what kind of IO operations were started
- * for this RAID10 operation, and about their status:
- */
- struct r10bio {
- atomic_t remaining; /* 'have we finished' count,
- * used from IRQ handlers
- */
- sector_t sector; /* virtual sector number */
- int sectors;
- unsigned long state;
- struct mddev *mddev;
- /*
- * original bio going to /dev/mdx
- */
- struct bio *master_bio;
- /*
- * if the IO is in READ direction, then this is where we read
- */
- int read_slot;
- struct list_head retry_list;
- /*
- * if the IO is in WRITE direction, then multiple bios are used,
- * one for each copy.
- * When resyncing we also use one for each copy.
- * When reconstructing, we use 2 bios, one for read, one for write.
- * We choose the number when they are allocated.
- * We sometimes need an extra bio to write to the replacement.
- */
- struct r10dev {
- struct bio *bio;
- union {
- struct bio *repl_bio; /* used for resync and
- * writes */
- struct md_rdev *rdev; /* used for reads
- * (read_slot >= 0) */
- };
- sector_t addr;
- int devnum;
- } devs[0];
- };
- /* bits for r10bio.state */
- enum r10bio_state {
- R10BIO_Uptodate,
- R10BIO_IsSync,
- R10BIO_IsRecover,
- R10BIO_IsReshape,
- R10BIO_Degraded,
- /* Set ReadError on bios that experience a read error
- * so that raid10d knows what to do with them.
- */
- R10BIO_ReadError,
- /* If a write for this request means we can clear some
- * known-bad-block records, we set this flag.
- */
- R10BIO_MadeGood,
- R10BIO_WriteError,
- /* During a reshape we might be performing IO on the
- * 'previous' part of the array, in which case this
- * flag is set
- */
- R10BIO_Previous,
- };
- #endif
|