123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161 |
- /*
- STB0899 Multistandard Frontend driver
- Copyright (C) Manu Abraham (abraham.manu@gmail.com)
- Copyright (C) ST Microelectronics
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
- #ifndef __STB0899_DRV_H
- #define __STB0899_DRV_H
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include "dvb_frontend.h"
- #define STB0899_TSMODE_SERIAL 1
- #define STB0899_CLKPOL_FALLING 2
- #define STB0899_CLKNULL_PARITY 3
- #define STB0899_SYNC_FORCED 4
- #define STB0899_FECMODE_DSS 5
- struct stb0899_s1_reg {
- u16 address;
- u8 data;
- };
- struct stb0899_s2_reg {
- u16 offset;
- u32 base_address;
- u32 data;
- };
- enum stb0899_inversion {
- IQ_SWAP_OFF = +1, /* inversion affects the sign of e. g. */
- IQ_SWAP_ON = -1, /* the derotator frequency register */
- };
- #define STB0899_GPIO00 0xf140
- #define STB0899_GPIO01 0xf141
- #define STB0899_GPIO02 0xf142
- #define STB0899_GPIO03 0xf143
- #define STB0899_GPIO04 0xf144
- #define STB0899_GPIO05 0xf145
- #define STB0899_GPIO06 0xf146
- #define STB0899_GPIO07 0xf147
- #define STB0899_GPIO08 0xf148
- #define STB0899_GPIO09 0xf149
- #define STB0899_GPIO10 0xf14a
- #define STB0899_GPIO11 0xf14b
- #define STB0899_GPIO12 0xf14c
- #define STB0899_GPIO13 0xf14d
- #define STB0899_GPIO14 0xf14e
- #define STB0899_GPIO15 0xf14f
- #define STB0899_GPIO16 0xf150
- #define STB0899_GPIO17 0xf151
- #define STB0899_GPIO18 0xf152
- #define STB0899_GPIO19 0xf153
- #define STB0899_GPIO20 0xf154
- #define STB0899_GPIOPULLUP 0x01 /* Output device is connected to Vdd */
- #define STB0899_GPIOPULLDN 0x00 /* Output device is connected to Vss */
- #define STB0899_POSTPROC_GPIO_POWER 0x00
- #define STB0899_POSTPROC_GPIO_LOCK 0x01
- /*
- * Post process output configuration control
- * 1. POWER ON/OFF (index 0)
- * 2. FE_HAS_LOCK/LOCK_LOSS (index 1)
- *
- * @gpio = one of the above listed GPIO's
- * @level = output state: pulled up or low
- */
- struct stb0899_postproc {
- u16 gpio;
- u8 level;
- };
- struct stb0899_config {
- const struct stb0899_s1_reg *init_dev;
- const struct stb0899_s2_reg *init_s2_demod;
- const struct stb0899_s1_reg *init_s1_demod;
- const struct stb0899_s2_reg *init_s2_fec;
- const struct stb0899_s1_reg *init_tst;
- const struct stb0899_postproc *postproc;
- enum stb0899_inversion inversion;
- u32 xtal_freq;
- u8 demod_address;
- u8 ts_output_mode;
- u8 block_sync_mode;
- u8 ts_pfbit_toggle;
- u8 clock_polarity;
- u8 data_clk_parity;
- u8 fec_mode;
- u8 data_output_ctl;
- u8 data_fifo_mode;
- u8 out_rate_comp;
- u8 i2c_repeater;
- // int inversion;
- int lo_clk;
- int hi_clk;
- u32 esno_ave;
- u32 esno_quant;
- u32 avframes_coarse;
- u32 avframes_fine;
- u32 miss_threshold;
- u32 uwp_threshold_acq;
- u32 uwp_threshold_track;
- u32 uwp_threshold_sof;
- u32 sof_search_timeout;
- u32 btr_nco_bits;
- u32 btr_gain_shift_offset;
- u32 crl_nco_bits;
- u32 ldpc_max_iter;
- int (*tuner_set_frequency)(struct dvb_frontend *fe, u32 frequency);
- int (*tuner_get_frequency)(struct dvb_frontend *fe, u32 *frequency);
- int (*tuner_set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth);
- int (*tuner_get_bandwidth)(struct dvb_frontend *fe, u32 *bandwidth);
- int (*tuner_set_rfsiggain)(struct dvb_frontend *fe, u32 rf_gain);
- };
- #if IS_REACHABLE(CONFIG_DVB_STB0899)
- extern struct dvb_frontend *stb0899_attach(struct stb0899_config *config,
- struct i2c_adapter *i2c);
- #else
- static inline struct dvb_frontend *stb0899_attach(struct stb0899_config *config,
- struct i2c_adapter *i2c)
- {
- printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__);
- return NULL;
- }
- #endif //CONFIG_DVB_STB0899
- #endif
|