123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379 |
- /*
- * smssdio.c - Siano 1xxx SDIO interface driver
- *
- * Copyright 2008 Pierre Ossman
- *
- * Based on code by Siano Mobile Silicon, Inc.,
- * Copyright (C) 2006-2008, Uri Shkolnik
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- *
- * This hardware is a bit odd in that all transfers should be done
- * to/from the SMSSDIO_DATA register, yet the "increase address" bit
- * always needs to be set.
- *
- * Also, buffers from the card are always aligned to 128 byte
- * boundaries.
- */
- /*
- * General cleanup notes:
- *
- * - only typedefs should be name *_t
- *
- * - use ERR_PTR and friends for smscore_register_device()
- *
- * - smscore_getbuffer should zero fields
- *
- * Fix stop command
- */
- #include "smscoreapi.h"
- #include <linux/moduleparam.h>
- #include <linux/slab.h>
- #include <linux/firmware.h>
- #include <linux/delay.h>
- #include <linux/mmc/card.h>
- #include <linux/mmc/sdio_func.h>
- #include <linux/mmc/sdio_ids.h>
- #include <linux/module.h>
- #include "sms-cards.h"
- #include "smsendian.h"
- /* Registers */
- #define SMSSDIO_DATA 0x00
- #define SMSSDIO_INT 0x04
- #define SMSSDIO_BLOCK_SIZE 128
- static const struct sdio_device_id smssdio_ids[] = {
- {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_STELLAR),
- .driver_data = SMS1XXX_BOARD_SIANO_STELLAR},
- {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_NOVA_A0),
- .driver_data = SMS1XXX_BOARD_SIANO_NOVA_A},
- {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_NOVA_B0),
- .driver_data = SMS1XXX_BOARD_SIANO_NOVA_B},
- {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_VEGA_A0),
- .driver_data = SMS1XXX_BOARD_SIANO_VEGA},
- {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_VENICE),
- .driver_data = SMS1XXX_BOARD_SIANO_VEGA},
- {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, 0x302),
- .driver_data = SMS1XXX_BOARD_SIANO_MING},
- {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, 0x500),
- .driver_data = SMS1XXX_BOARD_SIANO_PELE},
- {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, 0x600),
- .driver_data = SMS1XXX_BOARD_SIANO_RIO},
- {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, 0x700),
- .driver_data = SMS1XXX_BOARD_SIANO_DENVER_2160},
- {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, 0x800),
- .driver_data = SMS1XXX_BOARD_SIANO_DENVER_1530},
- { /* end: all zeroes */ },
- };
- MODULE_DEVICE_TABLE(sdio, smssdio_ids);
- struct smssdio_device {
- struct sdio_func *func;
- struct smscore_device_t *coredev;
- struct smscore_buffer_t *split_cb;
- };
- /*******************************************************************/
- /* Siano core callbacks */
- /*******************************************************************/
- static int smssdio_sendrequest(void *context, void *buffer, size_t size)
- {
- int ret = 0;
- struct smssdio_device *smsdev;
- smsdev = context;
- sdio_claim_host(smsdev->func);
- smsendian_handle_tx_message((struct sms_msg_data *) buffer);
- while (size >= smsdev->func->cur_blksize) {
- ret = sdio_memcpy_toio(smsdev->func, SMSSDIO_DATA,
- buffer, smsdev->func->cur_blksize);
- if (ret)
- goto out;
- buffer += smsdev->func->cur_blksize;
- size -= smsdev->func->cur_blksize;
- }
- if (size) {
- ret = sdio_memcpy_toio(smsdev->func, SMSSDIO_DATA,
- buffer, size);
- }
- out:
- sdio_release_host(smsdev->func);
- return ret;
- }
- /*******************************************************************/
- /* SDIO callbacks */
- /*******************************************************************/
- static void smssdio_interrupt(struct sdio_func *func)
- {
- int ret;
- struct smssdio_device *smsdev;
- struct smscore_buffer_t *cb;
- struct sms_msg_hdr *hdr;
- size_t size;
- smsdev = sdio_get_drvdata(func);
- /*
- * The interrupt register has no defined meaning. It is just
- * a way of turning of the level triggered interrupt.
- */
- (void)sdio_readb(func, SMSSDIO_INT, &ret);
- if (ret) {
- pr_err("Unable to read interrupt register!\n");
- return;
- }
- if (smsdev->split_cb == NULL) {
- cb = smscore_getbuffer(smsdev->coredev);
- if (!cb) {
- pr_err("Unable to allocate data buffer!\n");
- return;
- }
- ret = sdio_memcpy_fromio(smsdev->func,
- cb->p,
- SMSSDIO_DATA,
- SMSSDIO_BLOCK_SIZE);
- if (ret) {
- pr_err("Error %d reading initial block!\n", ret);
- return;
- }
- hdr = cb->p;
- if (hdr->msg_flags & MSG_HDR_FLAG_SPLIT_MSG) {
- smsdev->split_cb = cb;
- return;
- }
- if (hdr->msg_length > smsdev->func->cur_blksize)
- size = hdr->msg_length - smsdev->func->cur_blksize;
- else
- size = 0;
- } else {
- cb = smsdev->split_cb;
- hdr = cb->p;
- size = hdr->msg_length - sizeof(struct sms_msg_hdr);
- smsdev->split_cb = NULL;
- }
- if (size) {
- void *buffer;
- buffer = cb->p + (hdr->msg_length - size);
- size = ALIGN(size, SMSSDIO_BLOCK_SIZE);
- BUG_ON(smsdev->func->cur_blksize != SMSSDIO_BLOCK_SIZE);
- /*
- * First attempt to transfer all of it in one go...
- */
- ret = sdio_memcpy_fromio(smsdev->func,
- buffer,
- SMSSDIO_DATA,
- size);
- if (ret && ret != -EINVAL) {
- smscore_putbuffer(smsdev->coredev, cb);
- pr_err("Error %d reading data from card!\n", ret);
- return;
- }
- /*
- * ..then fall back to one block at a time if that is
- * not possible...
- *
- * (we have to do this manually because of the
- * problem with the "increase address" bit)
- */
- if (ret == -EINVAL) {
- while (size) {
- ret = sdio_memcpy_fromio(smsdev->func,
- buffer, SMSSDIO_DATA,
- smsdev->func->cur_blksize);
- if (ret) {
- smscore_putbuffer(smsdev->coredev, cb);
- pr_err("Error %d reading data from card!\n",
- ret);
- return;
- }
- buffer += smsdev->func->cur_blksize;
- if (size > smsdev->func->cur_blksize)
- size -= smsdev->func->cur_blksize;
- else
- size = 0;
- }
- }
- }
- cb->size = hdr->msg_length;
- cb->offset = 0;
- smsendian_handle_rx_message((struct sms_msg_data *) cb->p);
- smscore_onresponse(smsdev->coredev, cb);
- }
- static int smssdio_probe(struct sdio_func *func,
- const struct sdio_device_id *id)
- {
- int ret;
- int board_id;
- struct smssdio_device *smsdev;
- struct smsdevice_params_t params;
- board_id = id->driver_data;
- smsdev = kzalloc(sizeof(struct smssdio_device), GFP_KERNEL);
- if (!smsdev)
- return -ENOMEM;
- smsdev->func = func;
- memset(¶ms, 0, sizeof(struct smsdevice_params_t));
- params.device = &func->dev;
- params.buffer_size = 0x5000; /* ?? */
- params.num_buffers = 22; /* ?? */
- params.context = smsdev;
- snprintf(params.devpath, sizeof(params.devpath),
- "sdio\\%s", sdio_func_id(func));
- params.sendrequest_handler = smssdio_sendrequest;
- params.device_type = sms_get_board(board_id)->type;
- if (params.device_type != SMS_STELLAR)
- params.flags |= SMS_DEVICE_FAMILY2;
- else {
- /*
- * FIXME: Stellar needs special handling...
- */
- ret = -ENODEV;
- goto free;
- }
- ret = smscore_register_device(¶ms, &smsdev->coredev, NULL);
- if (ret < 0)
- goto free;
- smscore_set_board_id(smsdev->coredev, board_id);
- sdio_claim_host(func);
- ret = sdio_enable_func(func);
- if (ret)
- goto release;
- ret = sdio_set_block_size(func, SMSSDIO_BLOCK_SIZE);
- if (ret)
- goto disable;
- ret = sdio_claim_irq(func, smssdio_interrupt);
- if (ret)
- goto disable;
- sdio_set_drvdata(func, smsdev);
- sdio_release_host(func);
- ret = smscore_start_device(smsdev->coredev);
- if (ret < 0)
- goto reclaim;
- return 0;
- reclaim:
- sdio_claim_host(func);
- sdio_release_irq(func);
- disable:
- sdio_disable_func(func);
- release:
- sdio_release_host(func);
- smscore_unregister_device(smsdev->coredev);
- free:
- kfree(smsdev);
- return ret;
- }
- static void smssdio_remove(struct sdio_func *func)
- {
- struct smssdio_device *smsdev;
- smsdev = sdio_get_drvdata(func);
- /* FIXME: racy! */
- if (smsdev->split_cb)
- smscore_putbuffer(smsdev->coredev, smsdev->split_cb);
- smscore_unregister_device(smsdev->coredev);
- sdio_claim_host(func);
- sdio_release_irq(func);
- sdio_disable_func(func);
- sdio_release_host(func);
- kfree(smsdev);
- }
- static struct sdio_driver smssdio_driver = {
- .name = "smssdio",
- .id_table = smssdio_ids,
- .probe = smssdio_probe,
- .remove = smssdio_remove,
- };
- /*******************************************************************/
- /* Module functions */
- /*******************************************************************/
- static int __init smssdio_module_init(void)
- {
- int ret = 0;
- printk(KERN_INFO "smssdio: Siano SMS1xxx SDIO driver\n");
- printk(KERN_INFO "smssdio: Copyright Pierre Ossman\n");
- ret = sdio_register_driver(&smssdio_driver);
- return ret;
- }
- static void __exit smssdio_module_exit(void)
- {
- sdio_unregister_driver(&smssdio_driver);
- }
- module_init(smssdio_module_init);
- module_exit(smssdio_module_exit);
- MODULE_DESCRIPTION("Siano SMS1xxx SDIO driver");
- MODULE_AUTHOR("Pierre Ossman");
- MODULE_LICENSE("GPL");
|