123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305 |
- #
- # Platform drivers
- # Most drivers here are currently for webcam support
- menuconfig V4L_PLATFORM_DRIVERS
- bool "V4L platform devices"
- depends on MEDIA_CAMERA_SUPPORT
- default n
- ---help---
- Say Y here to enable support for platform-specific V4L drivers.
- if V4L_PLATFORM_DRIVERS
- source "drivers/media/platform/marvell-ccic/Kconfig"
- config VIDEO_VIA_CAMERA
- tristate "VIAFB camera controller support"
- depends on FB_VIA
- select VIDEOBUF_DMA_SG
- select VIDEO_OV7670
- help
- Driver support for the integrated camera controller in VIA
- Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems
- with ov7670 sensors.
- #
- # Platform multimedia device configuration
- #
- source "drivers/media/platform/davinci/Kconfig"
- source "drivers/media/platform/omap/Kconfig"
- source "drivers/media/platform/blackfin/Kconfig"
- config VIDEO_SH_VOU
- tristate "SuperH VOU video output driver"
- depends on MEDIA_CAMERA_SUPPORT
- depends on VIDEO_DEV && I2C && HAS_DMA
- depends on ARCH_SHMOBILE || COMPILE_TEST
- select VIDEOBUF_DMA_CONTIG
- help
- Support for the Video Output Unit (VOU) on SuperH SoCs.
- config VIDEO_VIU
- tristate "Freescale VIU Video Driver"
- depends on VIDEO_V4L2 && PPC_MPC512x
- select VIDEOBUF_DMA_CONTIG
- default y
- ---help---
- Support for Freescale VIU video driver. This device captures
- video data, or overlays video on DIU frame buffer.
- Say Y here if you want to enable VIU device on MPC5121e Rev2+.
- In doubt, say N.
- config VIDEO_TIMBERDALE
- tristate "Support for timberdale Video In/LogiWIN"
- depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && HAS_DMA
- depends on (MFD_TIMBERDALE && TIMB_DMA) || COMPILE_TEST
- select VIDEO_ADV7180
- select VIDEOBUF_DMA_CONTIG
- ---help---
- Add support for the Video In peripherial of the timberdale FPGA.
- config VIDEO_M32R_AR
- tristate "AR devices"
- depends on VIDEO_V4L2
- depends on M32R || COMPILE_TEST
- ---help---
- This is a video4linux driver for the Renesas AR (Artificial Retina)
- camera module.
- config VIDEO_M32R_AR_M64278
- tristate "AR device with color module M64278(VGA)"
- depends on PLAT_M32700UT
- select VIDEO_M32R_AR
- ---help---
- This is a video4linux driver for the Renesas AR (Artificial
- Retina) with M64278E-800 camera module.
- This module supports VGA(640x480 pixels) resolutions.
- To compile this driver as a module, choose M here: the
- module will be called arv.
- config VIDEO_OMAP3
- tristate "OMAP 3 Camera support"
- depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3
- depends on HAS_DMA && OF
- depends on OMAP_IOMMU
- select ARM_DMA_USE_IOMMU
- select VIDEOBUF2_DMA_CONTIG
- select MFD_SYSCON
- ---help---
- Driver for an OMAP 3 camera controller.
- config VIDEO_OMAP3_DEBUG
- bool "OMAP 3 Camera debug messages"
- depends on VIDEO_OMAP3
- ---help---
- Enable debug messages on OMAP 3 camera controller driver.
- config VIDEO_S3C_CAMIF
- tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver"
- depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
- depends on PM
- depends on ARCH_S3C64XX || PLAT_S3C24XX || COMPILE_TEST
- depends on HAS_DMA
- select VIDEOBUF2_DMA_CONTIG
- ---help---
- This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera
- host interface (CAMIF).
- To compile this driver as a module, choose M here: the module
- will be called s3c-camif.
- source "drivers/media/platform/soc_camera/Kconfig"
- source "drivers/media/platform/exynos4-is/Kconfig"
- source "drivers/media/platform/s5p-tv/Kconfig"
- source "drivers/media/platform/am437x/Kconfig"
- source "drivers/media/platform/xilinx/Kconfig"
- endif # V4L_PLATFORM_DRIVERS
- menuconfig V4L_MEM2MEM_DRIVERS
- bool "Memory-to-memory multimedia devices"
- depends on VIDEO_V4L2
- depends on MEDIA_CAMERA_SUPPORT
- default n
- ---help---
- Say Y here to enable selecting drivers for V4L devices that
- use system memory for both source and destination buffers, as opposed
- to capture and output drivers, which use memory buffers for just
- one of those.
- if V4L_MEM2MEM_DRIVERS
- config VIDEO_CODA
- tristate "Chips&Media Coda multi-standard codec IP"
- depends on VIDEO_DEV && VIDEO_V4L2 && ARCH_MXC
- depends on HAS_DMA
- select SRAM
- select VIDEOBUF2_DMA_CONTIG
- select VIDEOBUF2_VMALLOC
- select V4L2_MEM2MEM_DEV
- select GENERIC_ALLOCATOR
- ---help---
- Coda is a range of video codec IPs that supports
- H.264, MPEG-4, and other video formats.
- config VIDEO_MEM2MEM_DEINTERLACE
- tristate "Deinterlace support"
- depends on VIDEO_DEV && VIDEO_V4L2 && DMA_ENGINE
- depends on HAS_DMA
- select VIDEOBUF2_DMA_CONTIG
- select V4L2_MEM2MEM_DEV
- help
- Generic deinterlacing V4L2 driver.
- config VIDEO_SAMSUNG_S5P_G2D
- tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver"
- depends on VIDEO_DEV && VIDEO_V4L2
- depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
- depends on HAS_DMA
- select VIDEOBUF2_DMA_CONTIG
- select V4L2_MEM2MEM_DEV
- default n
- ---help---
- This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D
- 2d graphics accelerator.
- config VIDEO_SAMSUNG_S5P_JPEG
- tristate "Samsung S5P/Exynos3250/Exynos4 JPEG codec driver"
- depends on VIDEO_DEV && VIDEO_V4L2
- depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
- depends on HAS_DMA
- select VIDEOBUF2_DMA_CONTIG
- select V4L2_MEM2MEM_DEV
- ---help---
- This is a v4l2 driver for Samsung S5P, EXYNOS3250
- and EXYNOS4 JPEG codec
- config VIDEO_SAMSUNG_S5P_MFC
- tristate "Samsung S5P MFC Video Codec"
- depends on VIDEO_DEV && VIDEO_V4L2
- depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
- depends on HAS_DMA
- select VIDEOBUF2_DMA_CONTIG
- default n
- help
- MFC 5.1 and 6.x driver for V4L2
- config VIDEO_MX2_EMMAPRP
- tristate "MX2 eMMa-PrP support"
- depends on VIDEO_DEV && VIDEO_V4L2
- depends on SOC_IMX27 || COMPILE_TEST
- depends on HAS_DMA
- select VIDEOBUF2_DMA_CONTIG
- select V4L2_MEM2MEM_DEV
- help
- MX2X chips have a PrP that can be used to process buffers from
- memory to memory. Operations include resizing and format
- conversion.
- config VIDEO_SAMSUNG_EXYNOS_GSC
- tristate "Samsung Exynos G-Scaler driver"
- depends on VIDEO_DEV && VIDEO_V4L2
- depends on ARCH_EXYNOS5 || COMPILE_TEST
- depends on HAS_DMA
- select VIDEOBUF2_DMA_CONTIG
- select V4L2_MEM2MEM_DEV
- help
- This is a v4l2 driver for Samsung EXYNOS5 SoC G-Scaler.
- config VIDEO_STI_BDISP
- tristate "STMicroelectronics BDISP 2D blitter driver"
- depends on VIDEO_DEV && VIDEO_V4L2
- depends on ARCH_STI || COMPILE_TEST
- depends on HAVE_DMA_ATTRS
- select VIDEOBUF2_DMA_CONTIG
- select V4L2_MEM2MEM_DEV
- help
- This v4l2 mem2mem driver is a 2D blitter for STMicroelectronics SoC.
- config VIDEO_SH_VEU
- tristate "SuperH VEU mem2mem video processing driver"
- depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA
- select VIDEOBUF2_DMA_CONTIG
- select V4L2_MEM2MEM_DEV
- help
- Support for the Video Engine Unit (VEU) on SuperH and
- SH-Mobile SoCs.
- config VIDEO_RENESAS_JPU
- tristate "Renesas JPEG Processing Unit"
- depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA
- depends on ARCH_SHMOBILE || COMPILE_TEST
- select VIDEOBUF2_DMA_CONTIG
- select V4L2_MEM2MEM_DEV
- ---help---
- This is a V4L2 driver for the Renesas JPEG Processing Unit.
- To compile this driver as a module, choose M here: the module
- will be called rcar_jpu.
- config VIDEO_RENESAS_VSP1
- tristate "Renesas VSP1 Video Processing Engine"
- depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAS_DMA
- depends on (ARCH_SHMOBILE && OF) || COMPILE_TEST
- select VIDEOBUF2_DMA_CONTIG
- ---help---
- This is a V4L2 driver for the Renesas VSP1 video processing engine.
- To compile this driver as a module, choose M here: the module
- will be called vsp1.
- config VIDEO_TI_VPE
- tristate "TI VPE (Video Processing Engine) driver"
- depends on VIDEO_DEV && VIDEO_V4L2
- depends on SOC_DRA7XX || COMPILE_TEST
- depends on HAS_DMA
- select VIDEOBUF2_DMA_CONTIG
- select V4L2_MEM2MEM_DEV
- default n
- ---help---
- Support for the TI VPE(Video Processing Engine) block
- found on DRA7XX SoC.
- config VIDEO_TI_VPE_DEBUG
- bool "VPE debug messages"
- depends on VIDEO_TI_VPE
- ---help---
- Enable debug messages on VPE driver.
- endif # V4L_MEM2MEM_DRIVERS
- menuconfig V4L_TEST_DRIVERS
- bool "Media test drivers"
- depends on MEDIA_CAMERA_SUPPORT
- if V4L_TEST_DRIVERS
- source "drivers/media/platform/vivid/Kconfig"
- config VIDEO_VIM2M
- tristate "Virtual Memory-to-Memory Driver"
- depends on VIDEO_DEV && VIDEO_V4L2
- select VIDEOBUF2_VMALLOC
- select V4L2_MEM2MEM_DEV
- default n
- ---help---
- This is a virtual test device for the memory-to-memory driver
- framework.
- endif #V4L_TEST_DRIVERS
- menuconfig DVB_PLATFORM_DRIVERS
- bool "DVB platform devices"
- depends on MEDIA_DIGITAL_TV_SUPPORT
- default n
- ---help---
- Say Y here to enable support for platform-specific Digital TV drivers.
- if DVB_PLATFORM_DRIVERS
- source "drivers/media/platform/sti/c8sectpfe/Kconfig"
- endif #DVB_PLATFORM_DRIVERS
|