123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236 |
- /* sbc_gxx.c -- MTD map driver for Arcom Control Systems SBC-MediaGX,
- SBC-GXm and SBC-GX1 series boards.
- Copyright (C) 2001 Arcom Control System Ltd
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- The SBC-MediaGX / SBC-GXx has up to 16 MiB of
- Intel StrataFlash (28F320/28F640) in x8 mode.
- This driver uses the CFI probe and Intel Extended Command Set drivers.
- The flash is accessed as follows:
- 16 KiB memory window at 0xdc000-0xdffff
- Two IO address locations for paging
- 0x258
- bit 0-7: address bit 14-21
- 0x259
- bit 0-1: address bit 22-23
- bit 7: 0 - reset/powered down
- 1 - device enabled
- The single flash device is divided into 3 partition which appear as
- separate MTD devices.
- 25/04/2001 AJL (Arcom) Modified signon strings and partition sizes
- (to support bzImages up to 638KiB-ish)
- */
- // Includes
- #include <linux/module.h>
- #include <linux/ioport.h>
- #include <linux/init.h>
- #include <asm/io.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/map.h>
- #include <linux/mtd/partitions.h>
- // Defines
- // - Hardware specific
- #define WINDOW_START 0xdc000
- /* Number of bits in offset. */
- #define WINDOW_SHIFT 14
- #define WINDOW_LENGTH (1 << WINDOW_SHIFT)
- /* The bits for the offset into the window. */
- #define WINDOW_MASK (WINDOW_LENGTH-1)
- #define PAGE_IO 0x258
- #define PAGE_IO_SIZE 2
- /* bit 7 of 0x259 must be 1 to enable device. */
- #define DEVICE_ENABLE 0x8000
- // - Flash / Partition sizing
- #define MAX_SIZE_KiB 16384
- #define BOOT_PARTITION_SIZE_KiB 768
- #define DATA_PARTITION_SIZE_KiB 1280
- #define APP_PARTITION_SIZE_KiB 6144
- // Globals
- static volatile int page_in_window = -1; // Current page in window.
- static void __iomem *iomapadr;
- static DEFINE_SPINLOCK(sbc_gxx_spin);
- /* partition_info gives details on the logical partitions that the split the
- * single flash device into. If the size if zero we use up to the end of the
- * device. */
- static struct mtd_partition partition_info[]={
- { .name = "SBC-GXx flash boot partition",
- .offset = 0,
- .size = BOOT_PARTITION_SIZE_KiB*1024 },
- { .name = "SBC-GXx flash data partition",
- .offset = BOOT_PARTITION_SIZE_KiB*1024,
- .size = (DATA_PARTITION_SIZE_KiB)*1024 },
- { .name = "SBC-GXx flash application partition",
- .offset = (BOOT_PARTITION_SIZE_KiB+DATA_PARTITION_SIZE_KiB)*1024 }
- };
- #define NUM_PARTITIONS 3
- static inline void sbc_gxx_page(struct map_info *map, unsigned long ofs)
- {
- unsigned long page = ofs >> WINDOW_SHIFT;
- if( page!=page_in_window ) {
- outw( page | DEVICE_ENABLE, PAGE_IO );
- page_in_window = page;
- }
- }
- static map_word sbc_gxx_read8(struct map_info *map, unsigned long ofs)
- {
- map_word ret;
- spin_lock(&sbc_gxx_spin);
- sbc_gxx_page(map, ofs);
- ret.x[0] = readb(iomapadr + (ofs & WINDOW_MASK));
- spin_unlock(&sbc_gxx_spin);
- return ret;
- }
- static void sbc_gxx_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
- {
- while(len) {
- unsigned long thislen = len;
- if (len > (WINDOW_LENGTH - (from & WINDOW_MASK)))
- thislen = WINDOW_LENGTH-(from & WINDOW_MASK);
- spin_lock(&sbc_gxx_spin);
- sbc_gxx_page(map, from);
- memcpy_fromio(to, iomapadr + (from & WINDOW_MASK), thislen);
- spin_unlock(&sbc_gxx_spin);
- to += thislen;
- from += thislen;
- len -= thislen;
- }
- }
- static void sbc_gxx_write8(struct map_info *map, map_word d, unsigned long adr)
- {
- spin_lock(&sbc_gxx_spin);
- sbc_gxx_page(map, adr);
- writeb(d.x[0], iomapadr + (adr & WINDOW_MASK));
- spin_unlock(&sbc_gxx_spin);
- }
- static void sbc_gxx_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
- {
- while(len) {
- unsigned long thislen = len;
- if (len > (WINDOW_LENGTH - (to & WINDOW_MASK)))
- thislen = WINDOW_LENGTH-(to & WINDOW_MASK);
- spin_lock(&sbc_gxx_spin);
- sbc_gxx_page(map, to);
- memcpy_toio(iomapadr + (to & WINDOW_MASK), from, thislen);
- spin_unlock(&sbc_gxx_spin);
- to += thislen;
- from += thislen;
- len -= thislen;
- }
- }
- static struct map_info sbc_gxx_map = {
- .name = "SBC-GXx flash",
- .phys = NO_XIP,
- .size = MAX_SIZE_KiB*1024, /* this must be set to a maximum possible amount
- of flash so the cfi probe routines find all
- the chips */
- .bankwidth = 1,
- .read = sbc_gxx_read8,
- .copy_from = sbc_gxx_copy_from,
- .write = sbc_gxx_write8,
- .copy_to = sbc_gxx_copy_to
- };
- /* MTD device for all of the flash. */
- static struct mtd_info *all_mtd;
- static void cleanup_sbc_gxx(void)
- {
- if( all_mtd ) {
- mtd_device_unregister(all_mtd);
- map_destroy( all_mtd );
- }
- iounmap(iomapadr);
- release_region(PAGE_IO,PAGE_IO_SIZE);
- }
- static int __init init_sbc_gxx(void)
- {
- iomapadr = ioremap(WINDOW_START, WINDOW_LENGTH);
- if (!iomapadr) {
- printk( KERN_ERR"%s: failed to ioremap memory region\n",
- sbc_gxx_map.name );
- return -EIO;
- }
- if (!request_region( PAGE_IO, PAGE_IO_SIZE, "SBC-GXx flash")) {
- printk( KERN_ERR"%s: IO ports 0x%x-0x%x in use\n",
- sbc_gxx_map.name,
- PAGE_IO, PAGE_IO+PAGE_IO_SIZE-1 );
- iounmap(iomapadr);
- return -EAGAIN;
- }
- printk( KERN_INFO"%s: IO:0x%x-0x%x MEM:0x%x-0x%x\n",
- sbc_gxx_map.name,
- PAGE_IO, PAGE_IO+PAGE_IO_SIZE-1,
- WINDOW_START, WINDOW_START+WINDOW_LENGTH-1 );
- /* Probe for chip. */
- all_mtd = do_map_probe( "cfi_probe", &sbc_gxx_map );
- if( !all_mtd ) {
- cleanup_sbc_gxx();
- return -ENXIO;
- }
- all_mtd->owner = THIS_MODULE;
- /* Create MTD devices for each partition. */
- mtd_device_register(all_mtd, partition_info, NUM_PARTITIONS);
- return 0;
- }
- module_init(init_sbc_gxx);
- module_exit(cleanup_sbc_gxx);
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Arcom Control Systems Ltd.");
- MODULE_DESCRIPTION("MTD map driver for SBC-GXm and SBC-GX1 series boards");
|