microchip.c 3.6 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148
  1. /*
  2. * Copyright (C) 2015 Microchip Technology
  3. *
  4. * This program is free software; you can redistribute it and/or
  5. * modify it under the terms of the GNU General Public License
  6. * as published by the Free Software Foundation; either version 2
  7. * of the License, or (at your option) any later version.
  8. *
  9. * This program is distributed in the hope that it will be useful,
  10. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  12. * GNU General Public License for more details.
  13. *
  14. * You should have received a copy of the GNU General Public License
  15. * along with this program; if not, see <http://www.gnu.org/licenses/>.
  16. */
  17. #include <linux/kernel.h>
  18. #include <linux/module.h>
  19. #include <linux/mii.h>
  20. #include <linux/ethtool.h>
  21. #include <linux/phy.h>
  22. #include <linux/microchipphy.h>
  23. #define DRIVER_AUTHOR "WOOJUNG HUH <woojung.huh@microchip.com>"
  24. #define DRIVER_DESC "Microchip LAN88XX PHY driver"
  25. struct lan88xx_priv {
  26. int chip_id;
  27. int chip_rev;
  28. __u32 wolopts;
  29. };
  30. static int lan88xx_phy_config_intr(struct phy_device *phydev)
  31. {
  32. int rc;
  33. if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
  34. /* unmask all source and clear them before enable */
  35. rc = phy_write(phydev, LAN88XX_INT_MASK, 0x7FFF);
  36. rc = phy_read(phydev, LAN88XX_INT_STS);
  37. rc = phy_write(phydev, LAN88XX_INT_MASK,
  38. LAN88XX_INT_MASK_MDINTPIN_EN_ |
  39. LAN88XX_INT_MASK_LINK_CHANGE_);
  40. } else {
  41. rc = phy_write(phydev, LAN88XX_INT_MASK, 0);
  42. }
  43. return rc < 0 ? rc : 0;
  44. }
  45. static int lan88xx_phy_ack_interrupt(struct phy_device *phydev)
  46. {
  47. int rc = phy_read(phydev, LAN88XX_INT_STS);
  48. return rc < 0 ? rc : 0;
  49. }
  50. int lan88xx_suspend(struct phy_device *phydev)
  51. {
  52. struct lan88xx_priv *priv = phydev->priv;
  53. /* do not power down PHY when WOL is enabled */
  54. if (!priv->wolopts)
  55. genphy_suspend(phydev);
  56. return 0;
  57. }
  58. static int lan88xx_probe(struct phy_device *phydev)
  59. {
  60. struct device *dev = &phydev->dev;
  61. struct lan88xx_priv *priv;
  62. priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
  63. if (!priv)
  64. return -ENOMEM;
  65. priv->wolopts = 0;
  66. /* these values can be used to identify internal PHY */
  67. priv->chip_id = phy_read_mmd_indirect(phydev, LAN88XX_MMD3_CHIP_ID,
  68. 3, phydev->addr);
  69. priv->chip_rev = phy_read_mmd_indirect(phydev, LAN88XX_MMD3_CHIP_REV,
  70. 3, phydev->addr);
  71. phydev->priv = priv;
  72. return 0;
  73. }
  74. static void lan88xx_remove(struct phy_device *phydev)
  75. {
  76. struct device *dev = &phydev->dev;
  77. struct lan88xx_priv *priv = phydev->priv;
  78. if (priv)
  79. devm_kfree(dev, priv);
  80. }
  81. static int lan88xx_set_wol(struct phy_device *phydev,
  82. struct ethtool_wolinfo *wol)
  83. {
  84. struct lan88xx_priv *priv = phydev->priv;
  85. priv->wolopts = wol->wolopts;
  86. return 0;
  87. }
  88. static struct phy_driver microchip_phy_driver[] = {
  89. {
  90. .phy_id = 0x0007c130,
  91. .phy_id_mask = 0xfffffff0,
  92. .name = "Microchip LAN88xx",
  93. .features = (PHY_GBIT_FEATURES |
  94. SUPPORTED_Pause | SUPPORTED_Asym_Pause),
  95. .flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
  96. .probe = lan88xx_probe,
  97. .remove = lan88xx_remove,
  98. .config_init = genphy_config_init,
  99. .config_aneg = genphy_config_aneg,
  100. .read_status = genphy_read_status,
  101. .ack_interrupt = lan88xx_phy_ack_interrupt,
  102. .config_intr = lan88xx_phy_config_intr,
  103. .suspend = lan88xx_suspend,
  104. .resume = genphy_resume,
  105. .set_wol = lan88xx_set_wol,
  106. .driver = { .owner = THIS_MODULE, }
  107. } };
  108. module_phy_driver(microchip_phy_driver);
  109. static struct mdio_device_id __maybe_unused microchip_tbl[] = {
  110. { 0x0007c130, 0xfffffff0 },
  111. { }
  112. };
  113. MODULE_DEVICE_TABLE(mdio, microchip_tbl);
  114. MODULE_AUTHOR(DRIVER_AUTHOR);
  115. MODULE_DESCRIPTION(DRIVER_DESC);
  116. MODULE_LICENSE("GPL");