123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436 |
- menuconfig PWM
- bool "Pulse-Width Modulation (PWM) Support"
- help
- Generic Pulse-Width Modulation (PWM) support.
- In Pulse-Width Modulation, a variation of the width of pulses
- in a rectangular pulse signal is used as a means to alter the
- average power of the signal. Applications include efficient
- power delivery and voltage regulation. In computer systems,
- PWMs are commonly used to control fans or the brightness of
- display backlights.
- This framework provides a generic interface to PWM devices
- within the Linux kernel. On the driver side it provides an API
- to register and unregister a PWM chip, an abstraction of a PWM
- controller, that supports one or more PWM devices. Client
- drivers can request PWM devices and use the generic framework
- to configure as well as enable and disable them.
- This generic framework replaces the legacy PWM framework which
- allows only a single driver implementing the required API. Not
- all legacy implementations have been ported to the framework
- yet. The framework provides an API that is backward compatible
- with the legacy framework so that existing client drivers
- continue to work as expected.
- If unsure, say no.
- if PWM
- config PWM_SYSFS
- bool
- default y if SYSFS
- config PWM_AB8500
- tristate "AB8500 PWM support"
- depends on AB8500_CORE && ARCH_U8500
- help
- Generic PWM framework driver for Analog Baseband AB8500.
- To compile this driver as a module, choose M here: the module
- will be called pwm-ab8500.
- config PWM_ATMEL
- tristate "Atmel PWM support"
- depends on ARCH_AT91 || AVR32
- help
- Generic PWM framework driver for Atmel SoC.
- To compile this driver as a module, choose M here: the module
- will be called pwm-atmel.
- config PWM_ATMEL_HLCDC_PWM
- tristate "Atmel HLCDC PWM support"
- depends on MFD_ATMEL_HLCDC
- depends on HAVE_CLK
- help
- Generic PWM framework driver for the PWM output of the HLCDC
- (Atmel High-end LCD Controller). This PWM output is mainly used
- to control the LCD backlight.
- To compile this driver as a module, choose M here: the module
- will be called pwm-atmel-hlcdc.
- config PWM_ATMEL_TCB
- tristate "Atmel TC Block PWM support"
- depends on ATMEL_TCLIB && OF
- help
- Generic PWM framework driver for Atmel Timer Counter Block.
- A Timer Counter Block provides 6 PWM devices grouped by 2.
- Devices in a given group must have the same period.
- To compile this driver as a module, choose M here: the module
- will be called pwm-atmel-tcb.
- config PWM_BCM_KONA
- tristate "Kona PWM support"
- depends on ARCH_BCM_MOBILE
- help
- Generic PWM framework driver for Broadcom Kona PWM block.
- To compile this driver as a module, choose M here: the module
- will be called pwm-bcm-kona.
- config PWM_BCM2835
- tristate "BCM2835 PWM support"
- depends on ARCH_BCM2835
- help
- PWM framework driver for BCM2835 controller (Raspberry Pi)
- To compile this driver as a module, choose M here: the module
- will be called pwm-bcm2835.
- config PWM_BERLIN
- tristate "Marvell Berlin PWM support"
- depends on ARCH_BERLIN
- help
- PWM framework driver for Marvell Berlin SoCs.
- To compile this driver as a module, choose M here: the module
- will be called pwm-berlin.
- config PWM_BFIN
- tristate "Blackfin PWM support"
- depends on BFIN_GPTIMERS
- help
- Generic PWM framework driver for Blackfin.
- To compile this driver as a module, choose M here: the module
- will be called pwm-bfin.
- config PWM_BRCMSTB
- tristate "Broadcom STB PWM support"
- depends on ARCH_BRCMSTB || BMIPS_GENERIC
- help
- Generic PWM framework driver for the Broadcom Set-top-Box
- SoCs (BCM7xxx).
- To compile this driver as a module, choose M Here: the module
- will be called pwm-brcmstb.c.
- config PWM_CLPS711X
- tristate "CLPS711X PWM support"
- depends on ARCH_CLPS711X || COMPILE_TEST
- depends on HAS_IOMEM
- help
- Generic PWM framework driver for Cirrus Logic CLPS711X.
- To compile this driver as a module, choose M here: the module
- will be called pwm-clps711x.
- config PWM_CRC
- bool "Intel Crystalcove (CRC) PWM support"
- depends on X86 && INTEL_SOC_PMIC
- help
- Generic PWM framework driver for Crystalcove (CRC) PMIC based PWM
- control.
- config PWM_EP93XX
- tristate "Cirrus Logic EP93xx PWM support"
- depends on ARCH_EP93XX
- help
- Generic PWM framework driver for Cirrus Logic EP93xx.
- To compile this driver as a module, choose M here: the module
- will be called pwm-ep93xx.
- config PWM_FSL_FTM
- tristate "Freescale FlexTimer Module (FTM) PWM support"
- depends on OF
- select REGMAP_MMIO
- help
- Generic FTM PWM framework driver for Freescale VF610 and
- Layerscape LS-1 SoCs.
- To compile this driver as a module, choose M here: the module
- will be called pwm-fsl-ftm.
- config PWM_IMG
- tristate "Imagination Technologies PWM driver"
- depends on HAS_IOMEM
- depends on MFD_SYSCON
- depends on COMMON_CLK
- depends on MIPS || COMPILE_TEST
- help
- Generic PWM framework driver for Imagination Technologies
- PWM block which supports 4 channels.
- To compile this driver as a module, choose M here: the module
- will be called pwm-img
- config PWM_IMX
- tristate "i.MX PWM support"
- depends on ARCH_MXC
- help
- Generic PWM framework driver for i.MX.
- To compile this driver as a module, choose M here: the module
- will be called pwm-imx.
- config PWM_JZ4740
- tristate "Ingenic JZ4740 PWM support"
- depends on MACH_JZ4740
- help
- Generic PWM framework driver for Ingenic JZ4740 based
- machines.
- To compile this driver as a module, choose M here: the module
- will be called pwm-jz4740.
- config PWM_LP3943
- tristate "TI/National Semiconductor LP3943 PWM support"
- depends on MFD_LP3943
- help
- Generic PWM framework driver for LP3943 which supports two PWM
- channels.
- To compile this driver as a module, choose M here: the module
- will be called pwm-lp3943.
- config PWM_LPC18XX_SCT
- tristate "LPC18xx/43xx PWM/SCT support"
- depends on ARCH_LPC18XX
- help
- Generic PWM framework driver for NXP LPC18xx PWM/SCT which
- supports 16 channels.
- A maximum of 15 channels can be requested simultaneously and
- must have the same period.
- To compile this driver as a module, choose M here: the module
- will be called pwm-lpc18xx-sct.
- config PWM_LPC32XX
- tristate "LPC32XX PWM support"
- depends on ARCH_LPC32XX
- help
- Generic PWM framework driver for LPC32XX. The LPC32XX SOC has two
- PWM controllers.
- To compile this driver as a module, choose M here: the module
- will be called pwm-lpc32xx.
- config PWM_LPSS
- tristate "Intel LPSS PWM support"
- depends on X86
- help
- Generic PWM framework driver for Intel Low Power Subsystem PWM
- controller.
- To compile this driver as a module, choose M here: the module
- will be called pwm-lpss.
- config PWM_LPSS_PCI
- tristate "Intel LPSS PWM PCI driver"
- depends on PWM_LPSS && PCI
- help
- The PCI driver for Intel Low Power Subsystem PWM controller.
- To compile this driver as a module, choose M here: the module
- will be called pwm-lpss-pci.
- config PWM_LPSS_PLATFORM
- tristate "Intel LPSS PWM platform driver"
- depends on PWM_LPSS && ACPI
- help
- The platform driver for Intel Low Power Subsystem PWM controller.
- To compile this driver as a module, choose M here: the module
- will be called pwm-lpss-platform.
- config PWM_MTK_DISP
- tristate "MediaTek display PWM driver"
- depends on ARCH_MEDIATEK || COMPILE_TEST
- depends on HAS_IOMEM
- help
- Generic PWM framework driver for MediaTek disp-pwm device.
- The PWM is used to control the backlight brightness for display.
- To compile this driver as a module, choose M here: the module
- will be called pwm-mtk-disp.
- config PWM_MXS
- tristate "Freescale MXS PWM support"
- depends on ARCH_MXS && OF
- select STMP_DEVICE
- help
- Generic PWM framework driver for Freescale MXS.
- To compile this driver as a module, choose M here: the module
- will be called pwm-mxs.
- config PWM_PCA9685
- tristate "NXP PCA9685 PWM driver"
- depends on I2C
- select REGMAP_I2C
- help
- Generic PWM framework driver for NXP PCA9685 LED controller.
- To compile this driver as a module, choose M here: the module
- will be called pwm-pca9685.
- config PWM_PUV3
- tristate "PKUnity NetBook-0916 PWM support"
- depends on ARCH_PUV3
- help
- Generic PWM framework driver for PKUnity NetBook-0916.
- To compile this driver as a module, choose M here: the module
- will be called pwm-puv3.
- config PWM_PXA
- tristate "PXA PWM support"
- depends on ARCH_PXA
- help
- Generic PWM framework driver for PXA.
- To compile this driver as a module, choose M here: the module
- will be called pwm-pxa.
- config PWM_RCAR
- tristate "Renesas R-Car PWM support"
- depends on ARCH_RCAR_GEN1 || ARCH_RCAR_GEN2 || COMPILE_TEST
- depends on HAS_IOMEM
- help
- This driver exposes the PWM Timer controller found in Renesas
- R-Car chips through the PWM API.
- To compile this driver as a module, choose M here: the module
- will be called pwm-rcar.
- config PWM_RENESAS_TPU
- tristate "Renesas TPU PWM support"
- depends on ARCH_SHMOBILE || COMPILE_TEST
- depends on HAS_IOMEM
- help
- This driver exposes the Timer Pulse Unit (TPU) PWM controller found
- in Renesas chips through the PWM API.
- To compile this driver as a module, choose M here: the module
- will be called pwm-renesas-tpu.
- config PWM_ROCKCHIP
- tristate "Rockchip PWM support"
- depends on ARCH_ROCKCHIP
- help
- Generic PWM framework driver for the PWM controller found on
- Rockchip SoCs.
- config PWM_SAMSUNG
- tristate "Samsung PWM support"
- depends on PLAT_SAMSUNG || ARCH_EXYNOS
- help
- Generic PWM framework driver for Samsung.
- To compile this driver as a module, choose M here: the module
- will be called pwm-samsung.
- config PWM_SPEAR
- tristate "STMicroelectronics SPEAr PWM support"
- depends on PLAT_SPEAR
- depends on OF
- help
- Generic PWM framework driver for the PWM controller on ST
- SPEAr SoCs.
- To compile this driver as a module, choose M here: the module
- will be called pwm-spear.
- config PWM_STI
- tristate "STiH4xx PWM support"
- depends on ARCH_STI
- depends on OF
- help
- Generic PWM framework driver for STiH4xx SoCs.
- To compile this driver as a module, choose M here: the module
- will be called pwm-sti.
- config PWM_SUN4I
- tristate "Allwinner PWM support"
- depends on ARCH_SUNXI || COMPILE_TEST
- depends on HAS_IOMEM && COMMON_CLK
- help
- Generic PWM framework driver for Allwinner SoCs.
- To compile this driver as a module, choose M here: the module
- will be called pwm-sun4i.
- config PWM_TEGRA
- tristate "NVIDIA Tegra PWM support"
- depends on ARCH_TEGRA
- help
- Generic PWM framework driver for the PWFM controller found on NVIDIA
- Tegra SoCs.
- To compile this driver as a module, choose M here: the module
- will be called pwm-tegra.
- config PWM_TIECAP
- tristate "ECAP PWM support"
- depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX
- help
- PWM driver support for the ECAP APWM controller found on AM33XX
- TI SOC
- To compile this driver as a module, choose M here: the module
- will be called pwm-tiecap.
- config PWM_TIEHRPWM
- tristate "EHRPWM PWM support"
- depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX
- help
- PWM driver support for the EHRPWM controller found on AM33XX
- TI SOC
- To compile this driver as a module, choose M here: the module
- will be called pwm-tiehrpwm.
- config PWM_TIPWMSS
- bool
- default y if (ARCH_OMAP2PLUS) && (PWM_TIECAP || PWM_TIEHRPWM)
- help
- PWM Subsystem driver support for AM33xx SOC.
- PWM submodules require PWM config space access from submodule
- drivers and require common parent driver support.
- config PWM_TWL
- tristate "TWL4030/6030 PWM support"
- depends on TWL4030_CORE
- help
- Generic PWM framework driver for TWL4030/6030.
- To compile this driver as a module, choose M here: the module
- will be called pwm-twl.
- config PWM_TWL_LED
- tristate "TWL4030/6030 PWM support for LED drivers"
- depends on TWL4030_CORE
- help
- Generic PWM framework driver for TWL4030/6030 LED terminals.
- To compile this driver as a module, choose M here: the module
- will be called pwm-twl-led.
- config PWM_VT8500
- tristate "vt8500 PWM support"
- depends on ARCH_VT8500
- help
- Generic PWM framework driver for vt8500.
- To compile this driver as a module, choose M here: the module
- will be called pwm-vt8500.
- endif
|