123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461 |
- /*
- * Real Time Clock driver for Marvell 88PM860x PMIC
- *
- * Copyright (c) 2010 Marvell International Ltd.
- * Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/of.h>
- #include <linux/platform_device.h>
- #include <linux/slab.h>
- #include <linux/mutex.h>
- #include <linux/rtc.h>
- #include <linux/delay.h>
- #include <linux/mfd/core.h>
- #include <linux/mfd/88pm860x.h>
- #define VRTC_CALIBRATION
- struct pm860x_rtc_info {
- struct pm860x_chip *chip;
- struct i2c_client *i2c;
- struct rtc_device *rtc_dev;
- struct device *dev;
- struct delayed_work calib_work;
- int irq;
- int vrtc;
- int (*sync)(unsigned int ticks);
- };
- #define REG_VRTC_MEAS1 0x7D
- #define REG0_ADDR 0xB0
- #define REG1_ADDR 0xB2
- #define REG2_ADDR 0xB4
- #define REG3_ADDR 0xB6
- #define REG0_DATA 0xB1
- #define REG1_DATA 0xB3
- #define REG2_DATA 0xB5
- #define REG3_DATA 0xB7
- /* bit definitions of Measurement Enable Register 2 (0x51) */
- #define MEAS2_VRTC (1 << 0)
- /* bit definitions of RTC Register 1 (0xA0) */
- #define ALARM_EN (1 << 3)
- #define ALARM_WAKEUP (1 << 4)
- #define ALARM (1 << 5)
- #define RTC1_USE_XO (1 << 7)
- #define VRTC_CALIB_INTERVAL (HZ * 60 * 10) /* 10 minutes */
- static irqreturn_t rtc_update_handler(int irq, void *data)
- {
- struct pm860x_rtc_info *info = (struct pm860x_rtc_info *)data;
- int mask;
- mask = ALARM | ALARM_WAKEUP;
- pm860x_set_bits(info->i2c, PM8607_RTC1, mask | ALARM_EN, mask);
- rtc_update_irq(info->rtc_dev, 1, RTC_AF);
- return IRQ_HANDLED;
- }
- static int pm860x_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
- {
- struct pm860x_rtc_info *info = dev_get_drvdata(dev);
- if (enabled)
- pm860x_set_bits(info->i2c, PM8607_RTC1, ALARM_EN, ALARM_EN);
- else
- pm860x_set_bits(info->i2c, PM8607_RTC1, ALARM_EN, 0);
- return 0;
- }
- /*
- * Calculate the next alarm time given the requested alarm time mask
- * and the current time.
- */
- static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now,
- struct rtc_time *alrm)
- {
- unsigned long next_time;
- unsigned long now_time;
- next->tm_year = now->tm_year;
- next->tm_mon = now->tm_mon;
- next->tm_mday = now->tm_mday;
- next->tm_hour = alrm->tm_hour;
- next->tm_min = alrm->tm_min;
- next->tm_sec = alrm->tm_sec;
- rtc_tm_to_time(now, &now_time);
- rtc_tm_to_time(next, &next_time);
- if (next_time < now_time) {
- /* Advance one day */
- next_time += 60 * 60 * 24;
- rtc_time_to_tm(next_time, next);
- }
- }
- static int pm860x_rtc_read_time(struct device *dev, struct rtc_time *tm)
- {
- struct pm860x_rtc_info *info = dev_get_drvdata(dev);
- unsigned char buf[8];
- unsigned long ticks, base, data;
- pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
- dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
- buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
- base = (buf[1] << 24) | (buf[3] << 16) | (buf[5] << 8) | buf[7];
- /* load 32-bit read-only counter */
- pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
- data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
- ticks = base + data;
- dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
- base, data, ticks);
- rtc_time_to_tm(ticks, tm);
- return 0;
- }
- static int pm860x_rtc_set_time(struct device *dev, struct rtc_time *tm)
- {
- struct pm860x_rtc_info *info = dev_get_drvdata(dev);
- unsigned char buf[4];
- unsigned long ticks, base, data;
- if ((tm->tm_year < 70) || (tm->tm_year > 138)) {
- dev_dbg(info->dev, "Set time %d out of range. "
- "Please set time between 1970 to 2038.\n",
- 1900 + tm->tm_year);
- return -EINVAL;
- }
- rtc_tm_to_time(tm, &ticks);
- /* load 32-bit read-only counter */
- pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
- data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
- base = ticks - data;
- dev_dbg(info->dev, "set base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
- base, data, ticks);
- pm860x_page_reg_write(info->i2c, REG0_DATA, (base >> 24) & 0xFF);
- pm860x_page_reg_write(info->i2c, REG1_DATA, (base >> 16) & 0xFF);
- pm860x_page_reg_write(info->i2c, REG2_DATA, (base >> 8) & 0xFF);
- pm860x_page_reg_write(info->i2c, REG3_DATA, base & 0xFF);
- if (info->sync)
- info->sync(ticks);
- return 0;
- }
- static int pm860x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
- {
- struct pm860x_rtc_info *info = dev_get_drvdata(dev);
- unsigned char buf[8];
- unsigned long ticks, base, data;
- int ret;
- pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
- dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
- buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
- base = (buf[1] << 24) | (buf[3] << 16) | (buf[5] << 8) | buf[7];
- pm860x_bulk_read(info->i2c, PM8607_RTC_EXPIRE1, 4, buf);
- data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
- ticks = base + data;
- dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
- base, data, ticks);
- rtc_time_to_tm(ticks, &alrm->time);
- ret = pm860x_reg_read(info->i2c, PM8607_RTC1);
- alrm->enabled = (ret & ALARM_EN) ? 1 : 0;
- alrm->pending = (ret & (ALARM | ALARM_WAKEUP)) ? 1 : 0;
- return 0;
- }
- static int pm860x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
- {
- struct pm860x_rtc_info *info = dev_get_drvdata(dev);
- struct rtc_time now_tm, alarm_tm;
- unsigned long ticks, base, data;
- unsigned char buf[8];
- int mask;
- pm860x_set_bits(info->i2c, PM8607_RTC1, ALARM_EN, 0);
- pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
- dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
- buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
- base = (buf[1] << 24) | (buf[3] << 16) | (buf[5] << 8) | buf[7];
- /* load 32-bit read-only counter */
- pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
- data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
- ticks = base + data;
- dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
- base, data, ticks);
- rtc_time_to_tm(ticks, &now_tm);
- rtc_next_alarm_time(&alarm_tm, &now_tm, &alrm->time);
- /* get new ticks for alarm in 24 hours */
- rtc_tm_to_time(&alarm_tm, &ticks);
- data = ticks - base;
- buf[0] = data & 0xff;
- buf[1] = (data >> 8) & 0xff;
- buf[2] = (data >> 16) & 0xff;
- buf[3] = (data >> 24) & 0xff;
- pm860x_bulk_write(info->i2c, PM8607_RTC_EXPIRE1, 4, buf);
- if (alrm->enabled) {
- mask = ALARM | ALARM_WAKEUP | ALARM_EN;
- pm860x_set_bits(info->i2c, PM8607_RTC1, mask, mask);
- } else {
- mask = ALARM | ALARM_WAKEUP | ALARM_EN;
- pm860x_set_bits(info->i2c, PM8607_RTC1, mask,
- ALARM | ALARM_WAKEUP);
- }
- return 0;
- }
- static const struct rtc_class_ops pm860x_rtc_ops = {
- .read_time = pm860x_rtc_read_time,
- .set_time = pm860x_rtc_set_time,
- .read_alarm = pm860x_rtc_read_alarm,
- .set_alarm = pm860x_rtc_set_alarm,
- .alarm_irq_enable = pm860x_rtc_alarm_irq_enable,
- };
- #ifdef VRTC_CALIBRATION
- static void calibrate_vrtc_work(struct work_struct *work)
- {
- struct pm860x_rtc_info *info = container_of(work,
- struct pm860x_rtc_info, calib_work.work);
- unsigned char buf[2];
- unsigned int sum, data, mean, vrtc_set;
- int i;
- for (i = 0, sum = 0; i < 16; i++) {
- msleep(100);
- pm860x_bulk_read(info->i2c, REG_VRTC_MEAS1, 2, buf);
- data = (buf[0] << 4) | buf[1];
- data = (data * 5400) >> 12; /* convert to mv */
- sum += data;
- }
- mean = sum >> 4;
- vrtc_set = 2700 + (info->vrtc & 0x3) * 200;
- dev_dbg(info->dev, "mean:%d, vrtc_set:%d\n", mean, vrtc_set);
- sum = pm860x_reg_read(info->i2c, PM8607_RTC_MISC1);
- data = sum & 0x3;
- if ((mean + 200) < vrtc_set) {
- /* try higher voltage */
- if (++data == 4)
- goto out;
- data = (sum & 0xf8) | (data & 0x3);
- pm860x_reg_write(info->i2c, PM8607_RTC_MISC1, data);
- } else if ((mean - 200) > vrtc_set) {
- /* try lower voltage */
- if (data-- == 0)
- goto out;
- data = (sum & 0xf8) | (data & 0x3);
- pm860x_reg_write(info->i2c, PM8607_RTC_MISC1, data);
- } else
- goto out;
- dev_dbg(info->dev, "set 0x%x to RTC_MISC1\n", data);
- /* trigger next calibration since VRTC is updated */
- schedule_delayed_work(&info->calib_work, VRTC_CALIB_INTERVAL);
- return;
- out:
- /* disable measurement */
- pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, 0);
- dev_dbg(info->dev, "finish VRTC calibration\n");
- return;
- }
- #endif
- #ifdef CONFIG_OF
- static int pm860x_rtc_dt_init(struct platform_device *pdev,
- struct pm860x_rtc_info *info)
- {
- struct device_node *np = pdev->dev.parent->of_node;
- int ret;
- if (!np)
- return -ENODEV;
- np = of_get_child_by_name(np, "rtc");
- if (!np) {
- dev_err(&pdev->dev, "failed to find rtc node\n");
- return -ENODEV;
- }
- ret = of_property_read_u32(np, "marvell,88pm860x-vrtc", &info->vrtc);
- if (ret)
- info->vrtc = 0;
- of_node_put(np);
- return 0;
- }
- #else
- #define pm860x_rtc_dt_init(x, y) (-1)
- #endif
- static int pm860x_rtc_probe(struct platform_device *pdev)
- {
- struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
- struct pm860x_rtc_pdata *pdata = NULL;
- struct pm860x_rtc_info *info;
- struct rtc_time tm;
- unsigned long ticks = 0;
- int ret;
- pdata = dev_get_platdata(&pdev->dev);
- info = devm_kzalloc(&pdev->dev, sizeof(struct pm860x_rtc_info),
- GFP_KERNEL);
- if (!info)
- return -ENOMEM;
- info->irq = platform_get_irq(pdev, 0);
- if (info->irq < 0) {
- dev_err(&pdev->dev, "No IRQ resource!\n");
- return info->irq;
- }
- info->chip = chip;
- info->i2c = (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
- info->dev = &pdev->dev;
- dev_set_drvdata(&pdev->dev, info);
- ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
- rtc_update_handler, IRQF_ONESHOT, "rtc",
- info);
- if (ret < 0) {
- dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
- info->irq, ret);
- return ret;
- }
- /* set addresses of 32-bit base value for RTC time */
- pm860x_page_reg_write(info->i2c, REG0_ADDR, REG0_DATA);
- pm860x_page_reg_write(info->i2c, REG1_ADDR, REG1_DATA);
- pm860x_page_reg_write(info->i2c, REG2_ADDR, REG2_DATA);
- pm860x_page_reg_write(info->i2c, REG3_ADDR, REG3_DATA);
- ret = pm860x_rtc_read_time(&pdev->dev, &tm);
- if (ret < 0) {
- dev_err(&pdev->dev, "Failed to read initial time.\n");
- return ret;
- }
- if ((tm.tm_year < 70) || (tm.tm_year > 138)) {
- tm.tm_year = 70;
- tm.tm_mon = 0;
- tm.tm_mday = 1;
- tm.tm_hour = 0;
- tm.tm_min = 0;
- tm.tm_sec = 0;
- ret = pm860x_rtc_set_time(&pdev->dev, &tm);
- if (ret < 0) {
- dev_err(&pdev->dev, "Failed to set initial time.\n");
- return ret;
- }
- }
- rtc_tm_to_time(&tm, &ticks);
- if (pm860x_rtc_dt_init(pdev, info)) {
- if (pdata && pdata->sync) {
- pdata->sync(ticks);
- info->sync = pdata->sync;
- }
- }
- info->rtc_dev = devm_rtc_device_register(&pdev->dev, "88pm860x-rtc",
- &pm860x_rtc_ops, THIS_MODULE);
- ret = PTR_ERR(info->rtc_dev);
- if (IS_ERR(info->rtc_dev)) {
- dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret);
- return ret;
- }
- /*
- * enable internal XO instead of internal 3.25MHz clock since it can
- * free running in PMIC power-down state.
- */
- pm860x_set_bits(info->i2c, PM8607_RTC1, RTC1_USE_XO, RTC1_USE_XO);
- #ifdef VRTC_CALIBRATION
- /* <00> -- 2.7V, <01> -- 2.9V, <10> -- 3.1V, <11> -- 3.3V */
- if (pm860x_rtc_dt_init(pdev, info)) {
- if (pdata && pdata->vrtc)
- info->vrtc = pdata->vrtc & 0x3;
- else
- info->vrtc = 1;
- }
- pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, MEAS2_VRTC);
- /* calibrate VRTC */
- INIT_DELAYED_WORK(&info->calib_work, calibrate_vrtc_work);
- schedule_delayed_work(&info->calib_work, VRTC_CALIB_INTERVAL);
- #endif /* VRTC_CALIBRATION */
- device_init_wakeup(&pdev->dev, 1);
- return 0;
- }
- static int pm860x_rtc_remove(struct platform_device *pdev)
- {
- struct pm860x_rtc_info *info = platform_get_drvdata(pdev);
- #ifdef VRTC_CALIBRATION
- flush_scheduled_work();
- /* disable measurement */
- pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, 0);
- #endif /* VRTC_CALIBRATION */
- return 0;
- }
- #ifdef CONFIG_PM_SLEEP
- static int pm860x_rtc_suspend(struct device *dev)
- {
- struct platform_device *pdev = to_platform_device(dev);
- struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
- if (device_may_wakeup(dev))
- chip->wakeup_flag |= 1 << PM8607_IRQ_RTC;
- return 0;
- }
- static int pm860x_rtc_resume(struct device *dev)
- {
- struct platform_device *pdev = to_platform_device(dev);
- struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
- if (device_may_wakeup(dev))
- chip->wakeup_flag &= ~(1 << PM8607_IRQ_RTC);
- return 0;
- }
- #endif
- static SIMPLE_DEV_PM_OPS(pm860x_rtc_pm_ops, pm860x_rtc_suspend, pm860x_rtc_resume);
- static struct platform_driver pm860x_rtc_driver = {
- .driver = {
- .name = "88pm860x-rtc",
- .pm = &pm860x_rtc_pm_ops,
- },
- .probe = pm860x_rtc_probe,
- .remove = pm860x_rtc_remove,
- };
- module_platform_driver(pm860x_rtc_driver);
- MODULE_DESCRIPTION("Marvell 88PM860x RTC driver");
- MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
- MODULE_LICENSE("GPL");
|