123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593 |
- /*
- * "RTT as Real Time Clock" driver for AT91SAM9 SoC family
- *
- * (C) 2007 Michel Benoit
- *
- * Based on rtc-at91rm9200.c by Rick Bronson
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
- #include <linux/clk.h>
- #include <linux/interrupt.h>
- #include <linux/ioctl.h>
- #include <linux/io.h>
- #include <linux/kernel.h>
- #include <linux/mfd/syscon.h>
- #include <linux/module.h>
- #include <linux/of.h>
- #include <linux/platform_device.h>
- #include <linux/regmap.h>
- #include <linux/rtc.h>
- #include <linux/slab.h>
- #include <linux/suspend.h>
- #include <linux/time.h>
- /*
- * This driver uses two configurable hardware resources that live in the
- * AT91SAM9 backup power domain (intended to be powered at all times)
- * to implement the Real Time Clock interfaces
- *
- * - A "Real-time Timer" (RTT) counts up in seconds from a base time.
- * We can't assign the counter value (CRTV) ... but we can reset it.
- *
- * - One of the "General Purpose Backup Registers" (GPBRs) holds the
- * base time, normally an offset from the beginning of the POSIX
- * epoch (1970-Jan-1 00:00:00 UTC). Some systems also include the
- * local timezone's offset.
- *
- * The RTC's value is the RTT counter plus that offset. The RTC's alarm
- * is likewise a base (ALMV) plus that offset.
- *
- * Not all RTTs will be used as RTCs; some systems have multiple RTTs to
- * choose from, or a "real" RTC module. All systems have multiple GPBR
- * registers available, likewise usable for more than "RTC" support.
- */
- #define AT91_RTT_MR 0x00 /* Real-time Mode Register */
- #define AT91_RTT_RTPRES (0xffff << 0) /* Real-time Timer Prescaler Value */
- #define AT91_RTT_ALMIEN (1 << 16) /* Alarm Interrupt Enable */
- #define AT91_RTT_RTTINCIEN (1 << 17) /* Real Time Timer Increment Interrupt Enable */
- #define AT91_RTT_RTTRST (1 << 18) /* Real Time Timer Restart */
- #define AT91_RTT_AR 0x04 /* Real-time Alarm Register */
- #define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */
- #define AT91_RTT_VR 0x08 /* Real-time Value Register */
- #define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */
- #define AT91_RTT_SR 0x0c /* Real-time Status Register */
- #define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */
- #define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */
- /*
- * We store ALARM_DISABLED in ALMV to record that no alarm is set.
- * It's also the reset value for that field.
- */
- #define ALARM_DISABLED ((u32)~0)
- struct sam9_rtc {
- void __iomem *rtt;
- struct rtc_device *rtcdev;
- u32 imr;
- struct regmap *gpbr;
- unsigned int gpbr_offset;
- int irq;
- struct clk *sclk;
- bool suspended;
- unsigned long events;
- spinlock_t lock;
- };
- #define rtt_readl(rtc, field) \
- readl((rtc)->rtt + AT91_RTT_ ## field)
- #define rtt_writel(rtc, field, val) \
- writel((val), (rtc)->rtt + AT91_RTT_ ## field)
- static inline unsigned int gpbr_readl(struct sam9_rtc *rtc)
- {
- unsigned int val;
- regmap_read(rtc->gpbr, rtc->gpbr_offset, &val);
- return val;
- }
- static inline void gpbr_writel(struct sam9_rtc *rtc, unsigned int val)
- {
- regmap_write(rtc->gpbr, rtc->gpbr_offset, val);
- }
- /*
- * Read current time and date in RTC
- */
- static int at91_rtc_readtime(struct device *dev, struct rtc_time *tm)
- {
- struct sam9_rtc *rtc = dev_get_drvdata(dev);
- u32 secs, secs2;
- u32 offset;
- /* read current time offset */
- offset = gpbr_readl(rtc);
- if (offset == 0)
- return -EILSEQ;
- /* reread the counter to help sync the two clock domains */
- secs = rtt_readl(rtc, VR);
- secs2 = rtt_readl(rtc, VR);
- if (secs != secs2)
- secs = rtt_readl(rtc, VR);
- rtc_time_to_tm(offset + secs, tm);
- dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readtime",
- 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
- tm->tm_hour, tm->tm_min, tm->tm_sec);
- return 0;
- }
- /*
- * Set current time and date in RTC
- */
- static int at91_rtc_settime(struct device *dev, struct rtc_time *tm)
- {
- struct sam9_rtc *rtc = dev_get_drvdata(dev);
- int err;
- u32 offset, alarm, mr;
- unsigned long secs;
- dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "settime",
- 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
- tm->tm_hour, tm->tm_min, tm->tm_sec);
- err = rtc_tm_to_time(tm, &secs);
- if (err != 0)
- return err;
- mr = rtt_readl(rtc, MR);
- /* disable interrupts */
- rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
- /* read current time offset */
- offset = gpbr_readl(rtc);
- /* store the new base time in a battery backup register */
- secs += 1;
- gpbr_writel(rtc, secs);
- /* adjust the alarm time for the new base */
- alarm = rtt_readl(rtc, AR);
- if (alarm != ALARM_DISABLED) {
- if (offset > secs) {
- /* time jumped backwards, increase time until alarm */
- alarm += (offset - secs);
- } else if ((alarm + offset) > secs) {
- /* time jumped forwards, decrease time until alarm */
- alarm -= (secs - offset);
- } else {
- /* time jumped past the alarm, disable alarm */
- alarm = ALARM_DISABLED;
- mr &= ~AT91_RTT_ALMIEN;
- }
- rtt_writel(rtc, AR, alarm);
- }
- /* reset the timer, and re-enable interrupts */
- rtt_writel(rtc, MR, mr | AT91_RTT_RTTRST);
- return 0;
- }
- static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
- {
- struct sam9_rtc *rtc = dev_get_drvdata(dev);
- struct rtc_time *tm = &alrm->time;
- u32 alarm = rtt_readl(rtc, AR);
- u32 offset;
- offset = gpbr_readl(rtc);
- if (offset == 0)
- return -EILSEQ;
- memset(alrm, 0, sizeof(*alrm));
- if (alarm != ALARM_DISABLED && offset != 0) {
- rtc_time_to_tm(offset + alarm, tm);
- dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readalarm",
- 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
- tm->tm_hour, tm->tm_min, tm->tm_sec);
- if (rtt_readl(rtc, MR) & AT91_RTT_ALMIEN)
- alrm->enabled = 1;
- }
- return 0;
- }
- static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
- {
- struct sam9_rtc *rtc = dev_get_drvdata(dev);
- struct rtc_time *tm = &alrm->time;
- unsigned long secs;
- u32 offset;
- u32 mr;
- int err;
- err = rtc_tm_to_time(tm, &secs);
- if (err != 0)
- return err;
- offset = gpbr_readl(rtc);
- if (offset == 0) {
- /* time is not set */
- return -EILSEQ;
- }
- mr = rtt_readl(rtc, MR);
- rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN);
- /* alarm in the past? finish and leave disabled */
- if (secs <= offset) {
- rtt_writel(rtc, AR, ALARM_DISABLED);
- return 0;
- }
- /* else set alarm and maybe enable it */
- rtt_writel(rtc, AR, secs - offset);
- if (alrm->enabled)
- rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN);
- dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "setalarm",
- tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_hour,
- tm->tm_min, tm->tm_sec);
- return 0;
- }
- static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
- {
- struct sam9_rtc *rtc = dev_get_drvdata(dev);
- u32 mr = rtt_readl(rtc, MR);
- dev_dbg(dev, "alarm_irq_enable: enabled=%08x, mr %08x\n", enabled, mr);
- if (enabled)
- rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN);
- else
- rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN);
- return 0;
- }
- /*
- * Provide additional RTC information in /proc/driver/rtc
- */
- static int at91_rtc_proc(struct device *dev, struct seq_file *seq)
- {
- struct sam9_rtc *rtc = dev_get_drvdata(dev);
- u32 mr = mr = rtt_readl(rtc, MR);
- seq_printf(seq, "update_IRQ\t: %s\n",
- (mr & AT91_RTT_RTTINCIEN) ? "yes" : "no");
- return 0;
- }
- static irqreturn_t at91_rtc_cache_events(struct sam9_rtc *rtc)
- {
- u32 sr, mr;
- /* Shared interrupt may be for another device. Note: reading
- * SR clears it, so we must only read it in this irq handler!
- */
- mr = rtt_readl(rtc, MR) & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
- sr = rtt_readl(rtc, SR) & (mr >> 16);
- if (!sr)
- return IRQ_NONE;
- /* alarm status */
- if (sr & AT91_RTT_ALMS)
- rtc->events |= (RTC_AF | RTC_IRQF);
- /* timer update/increment */
- if (sr & AT91_RTT_RTTINC)
- rtc->events |= (RTC_UF | RTC_IRQF);
- return IRQ_HANDLED;
- }
- static void at91_rtc_flush_events(struct sam9_rtc *rtc)
- {
- if (!rtc->events)
- return;
- rtc_update_irq(rtc->rtcdev, 1, rtc->events);
- rtc->events = 0;
- pr_debug("%s: num=%ld, events=0x%02lx\n", __func__,
- rtc->events >> 8, rtc->events & 0x000000FF);
- }
- /*
- * IRQ handler for the RTC
- */
- static irqreturn_t at91_rtc_interrupt(int irq, void *_rtc)
- {
- struct sam9_rtc *rtc = _rtc;
- int ret;
- spin_lock(&rtc->lock);
- ret = at91_rtc_cache_events(rtc);
- /* We're called in suspended state */
- if (rtc->suspended) {
- /* Mask irqs coming from this peripheral */
- rtt_writel(rtc, MR,
- rtt_readl(rtc, MR) &
- ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
- /* Trigger a system wakeup */
- pm_system_wakeup();
- } else {
- at91_rtc_flush_events(rtc);
- }
- spin_unlock(&rtc->lock);
- return ret;
- }
- static const struct rtc_class_ops at91_rtc_ops = {
- .read_time = at91_rtc_readtime,
- .set_time = at91_rtc_settime,
- .read_alarm = at91_rtc_readalarm,
- .set_alarm = at91_rtc_setalarm,
- .proc = at91_rtc_proc,
- .alarm_irq_enable = at91_rtc_alarm_irq_enable,
- };
- static const struct regmap_config gpbr_regmap_config = {
- .reg_bits = 32,
- .val_bits = 32,
- .reg_stride = 4,
- };
- /*
- * Initialize and install RTC driver
- */
- static int at91_rtc_probe(struct platform_device *pdev)
- {
- struct resource *r;
- struct sam9_rtc *rtc;
- int ret, irq;
- u32 mr;
- unsigned int sclk_rate;
- irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(&pdev->dev, "failed to get interrupt resource\n");
- return irq;
- }
- rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
- if (!rtc)
- return -ENOMEM;
- rtc->irq = irq;
- /* platform setup code should have handled this; sigh */
- if (!device_can_wakeup(&pdev->dev))
- device_init_wakeup(&pdev->dev, 1);
- platform_set_drvdata(pdev, rtc);
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- rtc->rtt = devm_ioremap_resource(&pdev->dev, r);
- if (IS_ERR(rtc->rtt))
- return PTR_ERR(rtc->rtt);
- if (!pdev->dev.of_node) {
- /*
- * TODO: Remove this code chunk when removing non DT board
- * support. Remember to remove the gpbr_regmap_config
- * variable too.
- */
- void __iomem *gpbr;
- r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- gpbr = devm_ioremap_resource(&pdev->dev, r);
- if (IS_ERR(gpbr))
- return PTR_ERR(gpbr);
- rtc->gpbr = regmap_init_mmio(NULL, gpbr,
- &gpbr_regmap_config);
- } else {
- struct of_phandle_args args;
- ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
- "atmel,rtt-rtc-time-reg", 1, 0,
- &args);
- if (ret)
- return ret;
- rtc->gpbr = syscon_node_to_regmap(args.np);
- rtc->gpbr_offset = args.args[0];
- }
- if (IS_ERR(rtc->gpbr)) {
- dev_err(&pdev->dev, "failed to retrieve gpbr regmap, aborting.\n");
- return -ENOMEM;
- }
- rtc->sclk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(rtc->sclk))
- return PTR_ERR(rtc->sclk);
- ret = clk_prepare_enable(rtc->sclk);
- if (ret) {
- dev_err(&pdev->dev, "Could not enable slow clock\n");
- return ret;
- }
- sclk_rate = clk_get_rate(rtc->sclk);
- if (!sclk_rate || sclk_rate > AT91_RTT_RTPRES) {
- dev_err(&pdev->dev, "Invalid slow clock rate\n");
- ret = -EINVAL;
- goto err_clk;
- }
- mr = rtt_readl(rtc, MR);
- /* unless RTT is counting at 1 Hz, re-initialize it */
- if ((mr & AT91_RTT_RTPRES) != sclk_rate) {
- mr = AT91_RTT_RTTRST | (sclk_rate & AT91_RTT_RTPRES);
- gpbr_writel(rtc, 0);
- }
- /* disable all interrupts (same as on shutdown path) */
- mr &= ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
- rtt_writel(rtc, MR, mr);
- rtc->rtcdev = devm_rtc_device_register(&pdev->dev, pdev->name,
- &at91_rtc_ops, THIS_MODULE);
- if (IS_ERR(rtc->rtcdev)) {
- ret = PTR_ERR(rtc->rtcdev);
- goto err_clk;
- }
- /* register irq handler after we know what name we'll use */
- ret = devm_request_irq(&pdev->dev, rtc->irq, at91_rtc_interrupt,
- IRQF_SHARED | IRQF_COND_SUSPEND,
- dev_name(&rtc->rtcdev->dev), rtc);
- if (ret) {
- dev_dbg(&pdev->dev, "can't share IRQ %d?\n", rtc->irq);
- goto err_clk;
- }
- /* NOTE: sam9260 rev A silicon has a ROM bug which resets the
- * RTT on at least some reboots. If you have that chip, you must
- * initialize the time from some external source like a GPS, wall
- * clock, discrete RTC, etc
- */
- if (gpbr_readl(rtc) == 0)
- dev_warn(&pdev->dev, "%s: SET TIME!\n",
- dev_name(&rtc->rtcdev->dev));
- return 0;
- err_clk:
- clk_disable_unprepare(rtc->sclk);
- return ret;
- }
- /*
- * Disable and remove the RTC driver
- */
- static int at91_rtc_remove(struct platform_device *pdev)
- {
- struct sam9_rtc *rtc = platform_get_drvdata(pdev);
- u32 mr = rtt_readl(rtc, MR);
- /* disable all interrupts */
- rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
- clk_disable_unprepare(rtc->sclk);
- return 0;
- }
- static void at91_rtc_shutdown(struct platform_device *pdev)
- {
- struct sam9_rtc *rtc = platform_get_drvdata(pdev);
- u32 mr = rtt_readl(rtc, MR);
- rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
- rtt_writel(rtc, MR, mr & ~rtc->imr);
- }
- #ifdef CONFIG_PM_SLEEP
- /* AT91SAM9 RTC Power management control */
- static int at91_rtc_suspend(struct device *dev)
- {
- struct sam9_rtc *rtc = dev_get_drvdata(dev);
- u32 mr = rtt_readl(rtc, MR);
- /*
- * This IRQ is shared with DBGU and other hardware which isn't
- * necessarily a wakeup event source.
- */
- rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
- if (rtc->imr) {
- if (device_may_wakeup(dev) && (mr & AT91_RTT_ALMIEN)) {
- unsigned long flags;
- enable_irq_wake(rtc->irq);
- spin_lock_irqsave(&rtc->lock, flags);
- rtc->suspended = true;
- spin_unlock_irqrestore(&rtc->lock, flags);
- /* don't let RTTINC cause wakeups */
- if (mr & AT91_RTT_RTTINCIEN)
- rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN);
- } else
- rtt_writel(rtc, MR, mr & ~rtc->imr);
- }
- return 0;
- }
- static int at91_rtc_resume(struct device *dev)
- {
- struct sam9_rtc *rtc = dev_get_drvdata(dev);
- u32 mr;
- if (rtc->imr) {
- unsigned long flags;
- if (device_may_wakeup(dev))
- disable_irq_wake(rtc->irq);
- mr = rtt_readl(rtc, MR);
- rtt_writel(rtc, MR, mr | rtc->imr);
- spin_lock_irqsave(&rtc->lock, flags);
- rtc->suspended = false;
- at91_rtc_cache_events(rtc);
- at91_rtc_flush_events(rtc);
- spin_unlock_irqrestore(&rtc->lock, flags);
- }
- return 0;
- }
- #endif
- static SIMPLE_DEV_PM_OPS(at91_rtc_pm_ops, at91_rtc_suspend, at91_rtc_resume);
- #ifdef CONFIG_OF
- static const struct of_device_id at91_rtc_dt_ids[] = {
- { .compatible = "atmel,at91sam9260-rtt" },
- { /* sentinel */ }
- };
- MODULE_DEVICE_TABLE(of, at91_rtc_dt_ids);
- #endif
- static struct platform_driver at91_rtc_driver = {
- .probe = at91_rtc_probe,
- .remove = at91_rtc_remove,
- .shutdown = at91_rtc_shutdown,
- .driver = {
- .name = "rtc-at91sam9",
- .pm = &at91_rtc_pm_ops,
- .of_match_table = of_match_ptr(at91_rtc_dt_ids),
- },
- };
- module_platform_driver(at91_rtc_driver);
- MODULE_AUTHOR("Michel Benoit");
- MODULE_DESCRIPTION("RTC driver for Atmel AT91SAM9x");
- MODULE_LICENSE("GPL");
|