123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398 |
- /*
- * Aic94xx SAS/SATA driver hardware interface header file.
- *
- * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
- * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
- *
- * This file is licensed under GPLv2.
- *
- * This file is part of the aic94xx driver.
- *
- * The aic94xx driver is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of the
- * License.
- *
- * The aic94xx driver is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the aic94xx driver; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- */
- #ifndef _AIC94XX_HWI_H_
- #define _AIC94XX_HWI_H_
- #include <linux/interrupt.h>
- #include <linux/pci.h>
- #include <linux/dma-mapping.h>
- #include <scsi/libsas.h>
- #include "aic94xx.h"
- #include "aic94xx_sas.h"
- /* Define ASD_MAX_PHYS to the maximum phys ever. Currently 8. */
- #define ASD_MAX_PHYS 8
- #define ASD_PCBA_SN_SIZE 12
- struct asd_ha_addrspace {
- void __iomem *addr;
- unsigned long start; /* pci resource start */
- unsigned long len; /* pci resource len */
- unsigned long flags; /* pci resource flags */
- /* addresses internal to the host adapter */
- u32 swa_base; /* mmspace 1 (MBAR1) uses this only */
- u32 swb_base;
- u32 swc_base;
- };
- struct bios_struct {
- int present;
- u8 maj;
- u8 min;
- u32 bld;
- };
- struct unit_element_struct {
- u16 num;
- u16 size;
- void *area;
- };
- struct flash_struct {
- u32 bar;
- int present;
- int wide;
- u8 manuf;
- u8 dev_id;
- u8 sec_prot;
- u8 method;
- u32 dir_offs;
- };
- struct asd_phy_desc {
- /* From CTRL-A settings, then set to what is appropriate */
- u8 sas_addr[SAS_ADDR_SIZE];
- u8 max_sas_lrate;
- u8 min_sas_lrate;
- u8 max_sata_lrate;
- u8 min_sata_lrate;
- u8 flags;
- #define ASD_CRC_DIS 1
- #define ASD_SATA_SPINUP_HOLD 2
- u8 phy_control_0; /* mode 5 reg 0x160 */
- u8 phy_control_1; /* mode 5 reg 0x161 */
- u8 phy_control_2; /* mode 5 reg 0x162 */
- u8 phy_control_3; /* mode 5 reg 0x163 */
- };
- struct asd_dma_tok {
- void *vaddr;
- dma_addr_t dma_handle;
- size_t size;
- };
- struct hw_profile {
- struct bios_struct bios;
- struct unit_element_struct ue;
- struct flash_struct flash;
- u8 sas_addr[SAS_ADDR_SIZE];
- char pcba_sn[ASD_PCBA_SN_SIZE+1];
- u8 enabled_phys; /* mask of enabled phys */
- struct asd_phy_desc phy_desc[ASD_MAX_PHYS];
- u32 max_scbs; /* absolute sequencer scb queue size */
- struct asd_dma_tok *scb_ext;
- u32 max_ddbs;
- struct asd_dma_tok *ddb_ext;
- spinlock_t ddb_lock;
- void *ddb_bitmap;
- int num_phys; /* ENABLEABLE */
- int max_phys; /* REPORTED + ENABLEABLE */
- unsigned addr_range; /* max # of addrs; max # of possible ports */
- unsigned port_name_base;
- unsigned dev_name_base;
- unsigned sata_name_base;
- };
- struct asd_ascb {
- struct list_head list;
- struct asd_ha_struct *ha;
- struct scb *scb; /* equals dma_scb->vaddr */
- struct asd_dma_tok dma_scb;
- struct asd_dma_tok *sg_arr;
- void (*tasklet_complete)(struct asd_ascb *, struct done_list_struct *);
- u8 uldd_timer:1;
- /* internally generated command */
- struct timer_list timer;
- struct completion *completion;
- u8 tag_valid:1;
- __be16 tag; /* error recovery only */
- /* If this is an Empty SCB, index of first edb in seq->edb_arr. */
- int edb_index;
- /* Used by the timer timeout function. */
- int tc_index;
- void *uldd_task;
- };
- #define ASD_DL_SIZE_BITS 0x8
- #define ASD_DL_SIZE (1<<(2+ASD_DL_SIZE_BITS))
- #define ASD_DEF_DL_TOGGLE 0x01
- struct asd_seq_data {
- spinlock_t pend_q_lock;
- u16 scbpro;
- int pending;
- struct list_head pend_q;
- int can_queue; /* per adapter */
- struct asd_dma_tok next_scb; /* next scb to be delivered to CSEQ */
- spinlock_t tc_index_lock;
- void **tc_index_array;
- void *tc_index_bitmap;
- int tc_index_bitmap_bits;
- struct tasklet_struct dl_tasklet;
- struct done_list_struct *dl; /* array of done list entries, equals */
- struct asd_dma_tok *actual_dl; /* actual_dl->vaddr */
- int dl_toggle;
- int dl_next;
- int num_edbs;
- struct asd_dma_tok **edb_arr;
- int num_escbs;
- struct asd_ascb **escb_arr; /* array of pointers to escbs */
- };
- /* This is an internal port structure. These are used to get accurate
- * phy_mask for updating DDB 0.
- */
- struct asd_port {
- u8 sas_addr[SAS_ADDR_SIZE];
- u8 attached_sas_addr[SAS_ADDR_SIZE];
- u32 phy_mask;
- int num_phys;
- };
- /* This is the Host Adapter structure. It describes the hardware
- * SAS adapter.
- */
- struct asd_ha_struct {
- struct pci_dev *pcidev;
- const char *name;
- struct sas_ha_struct sas_ha;
- u8 revision_id;
- int iospace;
- spinlock_t iolock;
- struct asd_ha_addrspace io_handle[2];
- struct hw_profile hw_prof;
- struct asd_phy phys[ASD_MAX_PHYS];
- spinlock_t asd_ports_lock;
- struct asd_port asd_ports[ASD_MAX_PHYS];
- struct asd_sas_port ports[ASD_MAX_PHYS];
- struct dma_pool *scb_pool;
- struct asd_seq_data seq; /* sequencer related */
- u32 bios_status;
- const struct firmware *bios_image;
- };
- /* ---------- Common macros ---------- */
- #define ASD_BUSADDR_LO(__dma_handle) ((u32)(__dma_handle))
- #define ASD_BUSADDR_HI(__dma_handle) (((sizeof(dma_addr_t))==8) \
- ? ((u32)((__dma_handle) >> 32)) \
- : ((u32)0))
- #define dev_to_asd_ha(__dev) pci_get_drvdata(to_pci_dev(__dev))
- #define SCB_SITE_VALID(__site_no) (((__site_no) & 0xF0FF) != 0x00FF \
- && ((__site_no) & 0xF0FF) > 0x001F)
- /* For each bit set in __lseq_mask, set __lseq to equal the bit
- * position of the set bit and execute the statement following.
- * __mc is the temporary mask, used as a mask "counter".
- */
- #define for_each_sequencer(__lseq_mask, __mc, __lseq) \
- for ((__mc)=(__lseq_mask),(__lseq)=0;(__mc)!=0;(__lseq++),(__mc)>>=1)\
- if (((__mc) & 1))
- #define for_each_phy(__lseq_mask, __mc, __lseq) \
- for ((__mc)=(__lseq_mask),(__lseq)=0;(__mc)!=0;(__lseq++),(__mc)>>=1)\
- if (((__mc) & 1))
- #define PHY_ENABLED(_HA, _I) ((_HA)->hw_prof.enabled_phys & (1<<(_I)))
- /* ---------- DMA allocs ---------- */
- static inline struct asd_dma_tok *asd_dmatok_alloc(gfp_t flags)
- {
- return kmem_cache_alloc(asd_dma_token_cache, flags);
- }
- static inline void asd_dmatok_free(struct asd_dma_tok *token)
- {
- kmem_cache_free(asd_dma_token_cache, token);
- }
- static inline struct asd_dma_tok *asd_alloc_coherent(struct asd_ha_struct *
- asd_ha, size_t size,
- gfp_t flags)
- {
- struct asd_dma_tok *token = asd_dmatok_alloc(flags);
- if (token) {
- token->size = size;
- token->vaddr = dma_alloc_coherent(&asd_ha->pcidev->dev,
- token->size,
- &token->dma_handle,
- flags);
- if (!token->vaddr) {
- asd_dmatok_free(token);
- token = NULL;
- }
- }
- return token;
- }
- static inline void asd_free_coherent(struct asd_ha_struct *asd_ha,
- struct asd_dma_tok *token)
- {
- if (token) {
- dma_free_coherent(&asd_ha->pcidev->dev, token->size,
- token->vaddr, token->dma_handle);
- asd_dmatok_free(token);
- }
- }
- static inline void asd_init_ascb(struct asd_ha_struct *asd_ha,
- struct asd_ascb *ascb)
- {
- INIT_LIST_HEAD(&ascb->list);
- ascb->scb = ascb->dma_scb.vaddr;
- ascb->ha = asd_ha;
- ascb->timer.function = NULL;
- init_timer(&ascb->timer);
- ascb->tc_index = -1;
- }
- /* Must be called with the tc_index_lock held!
- */
- static inline void asd_tc_index_release(struct asd_seq_data *seq, int index)
- {
- seq->tc_index_array[index] = NULL;
- clear_bit(index, seq->tc_index_bitmap);
- }
- /* Must be called with the tc_index_lock held!
- */
- static inline int asd_tc_index_get(struct asd_seq_data *seq, void *ptr)
- {
- int index;
- index = find_first_zero_bit(seq->tc_index_bitmap,
- seq->tc_index_bitmap_bits);
- if (index == seq->tc_index_bitmap_bits)
- return -1;
- seq->tc_index_array[index] = ptr;
- set_bit(index, seq->tc_index_bitmap);
- return index;
- }
- /* Must be called with the tc_index_lock held!
- */
- static inline void *asd_tc_index_find(struct asd_seq_data *seq, int index)
- {
- return seq->tc_index_array[index];
- }
- /**
- * asd_ascb_free -- free a single aSCB after is has completed
- * @ascb: pointer to the aSCB of interest
- *
- * This frees an aSCB after it has been executed/completed by
- * the sequencer.
- */
- static inline void asd_ascb_free(struct asd_ascb *ascb)
- {
- if (ascb) {
- struct asd_ha_struct *asd_ha = ascb->ha;
- unsigned long flags;
- BUG_ON(!list_empty(&ascb->list));
- spin_lock_irqsave(&ascb->ha->seq.tc_index_lock, flags);
- asd_tc_index_release(&ascb->ha->seq, ascb->tc_index);
- spin_unlock_irqrestore(&ascb->ha->seq.tc_index_lock, flags);
- dma_pool_free(asd_ha->scb_pool, ascb->dma_scb.vaddr,
- ascb->dma_scb.dma_handle);
- kmem_cache_free(asd_ascb_cache, ascb);
- }
- }
- /**
- * asd_ascb_list_free -- free a list of ascbs
- * @ascb_list: a list of ascbs
- *
- * This function will free a list of ascbs allocated by asd_ascb_alloc_list.
- * It is used when say the scb queueing function returned QUEUE_FULL,
- * and we do not need the ascbs any more.
- */
- static inline void asd_ascb_free_list(struct asd_ascb *ascb_list)
- {
- LIST_HEAD(list);
- struct list_head *n, *pos;
- __list_add(&list, ascb_list->list.prev, &ascb_list->list);
- list_for_each_safe(pos, n, &list) {
- list_del_init(pos);
- asd_ascb_free(list_entry(pos, struct asd_ascb, list));
- }
- }
- /* ---------- Function declarations ---------- */
- int asd_init_hw(struct asd_ha_struct *asd_ha);
- irqreturn_t asd_hw_isr(int irq, void *dev_id);
- struct asd_ascb *asd_ascb_alloc_list(struct asd_ha_struct
- *asd_ha, int *num,
- gfp_t gfp_mask);
- int asd_post_ascb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb,
- int num);
- int asd_post_escb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb,
- int num);
- int asd_init_post_escbs(struct asd_ha_struct *asd_ha);
- void asd_build_control_phy(struct asd_ascb *ascb, int phy_id, u8 subfunc);
- void asd_control_led(struct asd_ha_struct *asd_ha, int phy_id, int op);
- void asd_turn_led(struct asd_ha_struct *asd_ha, int phy_id, int op);
- int asd_enable_phys(struct asd_ha_struct *asd_ha, const u8 phy_mask);
- void asd_ascb_timedout(unsigned long data);
- int asd_chip_hardrst(struct asd_ha_struct *asd_ha);
- #endif
|