1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006 |
- /*
- * Serial Attached SCSI (SAS) class SCSI Host glue.
- *
- * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
- * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
- *
- * This file is licensed under GPLv2.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- *
- */
- #include <linux/kthread.h>
- #include <linux/firmware.h>
- #include <linux/export.h>
- #include <linux/ctype.h>
- #include "sas_internal.h"
- #include <scsi/scsi_host.h>
- #include <scsi/scsi_device.h>
- #include <scsi/scsi_tcq.h>
- #include <scsi/scsi.h>
- #include <scsi/scsi_eh.h>
- #include <scsi/scsi_transport.h>
- #include <scsi/scsi_transport_sas.h>
- #include <scsi/sas_ata.h>
- #include "../scsi_sas_internal.h"
- #include "../scsi_transport_api.h"
- #include "../scsi_priv.h"
- #include <linux/err.h>
- #include <linux/blkdev.h>
- #include <linux/freezer.h>
- #include <linux/gfp.h>
- #include <linux/scatterlist.h>
- #include <linux/libata.h>
- /* record final status and free the task */
- static void sas_end_task(struct scsi_cmnd *sc, struct sas_task *task)
- {
- struct task_status_struct *ts = &task->task_status;
- int hs = 0, stat = 0;
- if (ts->resp == SAS_TASK_UNDELIVERED) {
- /* transport error */
- hs = DID_NO_CONNECT;
- } else { /* ts->resp == SAS_TASK_COMPLETE */
- /* task delivered, what happened afterwards? */
- switch (ts->stat) {
- case SAS_DEV_NO_RESPONSE:
- case SAS_INTERRUPTED:
- case SAS_PHY_DOWN:
- case SAS_NAK_R_ERR:
- case SAS_OPEN_TO:
- hs = DID_NO_CONNECT;
- break;
- case SAS_DATA_UNDERRUN:
- scsi_set_resid(sc, ts->residual);
- if (scsi_bufflen(sc) - scsi_get_resid(sc) < sc->underflow)
- hs = DID_ERROR;
- break;
- case SAS_DATA_OVERRUN:
- hs = DID_ERROR;
- break;
- case SAS_QUEUE_FULL:
- hs = DID_SOFT_ERROR; /* retry */
- break;
- case SAS_DEVICE_UNKNOWN:
- hs = DID_BAD_TARGET;
- break;
- case SAS_SG_ERR:
- hs = DID_PARITY;
- break;
- case SAS_OPEN_REJECT:
- if (ts->open_rej_reason == SAS_OREJ_RSVD_RETRY)
- hs = DID_SOFT_ERROR; /* retry */
- else
- hs = DID_ERROR;
- break;
- case SAS_PROTO_RESPONSE:
- SAS_DPRINTK("LLDD:%s sent SAS_PROTO_RESP for an SSP "
- "task; please report this\n",
- task->dev->port->ha->sas_ha_name);
- break;
- case SAS_ABORTED_TASK:
- hs = DID_ABORT;
- break;
- case SAM_STAT_CHECK_CONDITION:
- memcpy(sc->sense_buffer, ts->buf,
- min(SCSI_SENSE_BUFFERSIZE, ts->buf_valid_size));
- stat = SAM_STAT_CHECK_CONDITION;
- break;
- default:
- stat = ts->stat;
- break;
- }
- }
- sc->result = (hs << 16) | stat;
- ASSIGN_SAS_TASK(sc, NULL);
- sas_free_task(task);
- }
- static void sas_scsi_task_done(struct sas_task *task)
- {
- struct scsi_cmnd *sc = task->uldd_task;
- struct domain_device *dev = task->dev;
- struct sas_ha_struct *ha = dev->port->ha;
- unsigned long flags;
- spin_lock_irqsave(&dev->done_lock, flags);
- if (test_bit(SAS_HA_FROZEN, &ha->state))
- task = NULL;
- else
- ASSIGN_SAS_TASK(sc, NULL);
- spin_unlock_irqrestore(&dev->done_lock, flags);
- if (unlikely(!task)) {
- /* task will be completed by the error handler */
- SAS_DPRINTK("task done but aborted\n");
- return;
- }
- if (unlikely(!sc)) {
- SAS_DPRINTK("task_done called with non existing SCSI cmnd!\n");
- sas_free_task(task);
- return;
- }
- sas_end_task(sc, task);
- sc->scsi_done(sc);
- }
- static struct sas_task *sas_create_task(struct scsi_cmnd *cmd,
- struct domain_device *dev,
- gfp_t gfp_flags)
- {
- struct sas_task *task = sas_alloc_task(gfp_flags);
- struct scsi_lun lun;
- if (!task)
- return NULL;
- task->uldd_task = cmd;
- ASSIGN_SAS_TASK(cmd, task);
- task->dev = dev;
- task->task_proto = task->dev->tproto; /* BUG_ON(!SSP) */
- task->ssp_task.retry_count = 1;
- int_to_scsilun(cmd->device->lun, &lun);
- memcpy(task->ssp_task.LUN, &lun.scsi_lun, 8);
- task->ssp_task.task_attr = TASK_ATTR_SIMPLE;
- task->ssp_task.cmd = cmd;
- task->scatter = scsi_sglist(cmd);
- task->num_scatter = scsi_sg_count(cmd);
- task->total_xfer_len = scsi_bufflen(cmd);
- task->data_dir = cmd->sc_data_direction;
- task->task_done = sas_scsi_task_done;
- return task;
- }
- int sas_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
- {
- struct sas_internal *i = to_sas_internal(host->transportt);
- struct domain_device *dev = cmd_to_domain_dev(cmd);
- struct sas_task *task;
- int res = 0;
- /* If the device fell off, no sense in issuing commands */
- if (test_bit(SAS_DEV_GONE, &dev->state)) {
- cmd->result = DID_BAD_TARGET << 16;
- goto out_done;
- }
- if (dev_is_sata(dev)) {
- spin_lock_irq(dev->sata_dev.ap->lock);
- res = ata_sas_queuecmd(cmd, dev->sata_dev.ap);
- spin_unlock_irq(dev->sata_dev.ap->lock);
- return res;
- }
- task = sas_create_task(cmd, dev, GFP_ATOMIC);
- if (!task)
- return SCSI_MLQUEUE_HOST_BUSY;
- res = i->dft->lldd_execute_task(task, GFP_ATOMIC);
- if (res)
- goto out_free_task;
- return 0;
- out_free_task:
- SAS_DPRINTK("lldd_execute_task returned: %d\n", res);
- ASSIGN_SAS_TASK(cmd, NULL);
- sas_free_task(task);
- if (res == -SAS_QUEUE_FULL)
- cmd->result = DID_SOFT_ERROR << 16; /* retry */
- else
- cmd->result = DID_ERROR << 16;
- out_done:
- cmd->scsi_done(cmd);
- return 0;
- }
- static void sas_eh_finish_cmd(struct scsi_cmnd *cmd)
- {
- struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(cmd->device->host);
- struct domain_device *dev = cmd_to_domain_dev(cmd);
- struct sas_task *task = TO_SAS_TASK(cmd);
- /* At this point, we only get called following an actual abort
- * of the task, so we should be guaranteed not to be racing with
- * any completions from the LLD. Task is freed after this.
- */
- sas_end_task(cmd, task);
- if (dev_is_sata(dev)) {
- /* defer commands to libata so that libata EH can
- * handle ata qcs correctly
- */
- list_move_tail(&cmd->eh_entry, &sas_ha->eh_ata_q);
- return;
- }
- /* now finish the command and move it on to the error
- * handler done list, this also takes it off the
- * error handler pending list.
- */
- scsi_eh_finish_cmd(cmd, &sas_ha->eh_done_q);
- }
- static void sas_scsi_clear_queue_lu(struct list_head *error_q, struct scsi_cmnd *my_cmd)
- {
- struct scsi_cmnd *cmd, *n;
- list_for_each_entry_safe(cmd, n, error_q, eh_entry) {
- if (cmd->device->sdev_target == my_cmd->device->sdev_target &&
- cmd->device->lun == my_cmd->device->lun)
- sas_eh_finish_cmd(cmd);
- }
- }
- static void sas_scsi_clear_queue_I_T(struct list_head *error_q,
- struct domain_device *dev)
- {
- struct scsi_cmnd *cmd, *n;
- list_for_each_entry_safe(cmd, n, error_q, eh_entry) {
- struct domain_device *x = cmd_to_domain_dev(cmd);
- if (x == dev)
- sas_eh_finish_cmd(cmd);
- }
- }
- static void sas_scsi_clear_queue_port(struct list_head *error_q,
- struct asd_sas_port *port)
- {
- struct scsi_cmnd *cmd, *n;
- list_for_each_entry_safe(cmd, n, error_q, eh_entry) {
- struct domain_device *dev = cmd_to_domain_dev(cmd);
- struct asd_sas_port *x = dev->port;
- if (x == port)
- sas_eh_finish_cmd(cmd);
- }
- }
- enum task_disposition {
- TASK_IS_DONE,
- TASK_IS_ABORTED,
- TASK_IS_AT_LU,
- TASK_IS_NOT_AT_LU,
- TASK_ABORT_FAILED,
- };
- static enum task_disposition sas_scsi_find_task(struct sas_task *task)
- {
- unsigned long flags;
- int i, res;
- struct sas_internal *si =
- to_sas_internal(task->dev->port->ha->core.shost->transportt);
- for (i = 0; i < 5; i++) {
- SAS_DPRINTK("%s: aborting task 0x%p\n", __func__, task);
- res = si->dft->lldd_abort_task(task);
- spin_lock_irqsave(&task->task_state_lock, flags);
- if (task->task_state_flags & SAS_TASK_STATE_DONE) {
- spin_unlock_irqrestore(&task->task_state_lock, flags);
- SAS_DPRINTK("%s: task 0x%p is done\n", __func__,
- task);
- return TASK_IS_DONE;
- }
- spin_unlock_irqrestore(&task->task_state_lock, flags);
- if (res == TMF_RESP_FUNC_COMPLETE) {
- SAS_DPRINTK("%s: task 0x%p is aborted\n",
- __func__, task);
- return TASK_IS_ABORTED;
- } else if (si->dft->lldd_query_task) {
- SAS_DPRINTK("%s: querying task 0x%p\n",
- __func__, task);
- res = si->dft->lldd_query_task(task);
- switch (res) {
- case TMF_RESP_FUNC_SUCC:
- SAS_DPRINTK("%s: task 0x%p at LU\n",
- __func__, task);
- return TASK_IS_AT_LU;
- case TMF_RESP_FUNC_COMPLETE:
- SAS_DPRINTK("%s: task 0x%p not at LU\n",
- __func__, task);
- return TASK_IS_NOT_AT_LU;
- case TMF_RESP_FUNC_FAILED:
- SAS_DPRINTK("%s: task 0x%p failed to abort\n",
- __func__, task);
- return TASK_ABORT_FAILED;
- }
- }
- }
- return res;
- }
- static int sas_recover_lu(struct domain_device *dev, struct scsi_cmnd *cmd)
- {
- int res = TMF_RESP_FUNC_FAILED;
- struct scsi_lun lun;
- struct sas_internal *i =
- to_sas_internal(dev->port->ha->core.shost->transportt);
- int_to_scsilun(cmd->device->lun, &lun);
- SAS_DPRINTK("eh: device %llx LUN %llx has the task\n",
- SAS_ADDR(dev->sas_addr),
- cmd->device->lun);
- if (i->dft->lldd_abort_task_set)
- res = i->dft->lldd_abort_task_set(dev, lun.scsi_lun);
- if (res == TMF_RESP_FUNC_FAILED) {
- if (i->dft->lldd_clear_task_set)
- res = i->dft->lldd_clear_task_set(dev, lun.scsi_lun);
- }
- if (res == TMF_RESP_FUNC_FAILED) {
- if (i->dft->lldd_lu_reset)
- res = i->dft->lldd_lu_reset(dev, lun.scsi_lun);
- }
- return res;
- }
- static int sas_recover_I_T(struct domain_device *dev)
- {
- int res = TMF_RESP_FUNC_FAILED;
- struct sas_internal *i =
- to_sas_internal(dev->port->ha->core.shost->transportt);
- SAS_DPRINTK("I_T nexus reset for dev %016llx\n",
- SAS_ADDR(dev->sas_addr));
- if (i->dft->lldd_I_T_nexus_reset)
- res = i->dft->lldd_I_T_nexus_reset(dev);
- return res;
- }
- /* take a reference on the last known good phy for this device */
- struct sas_phy *sas_get_local_phy(struct domain_device *dev)
- {
- struct sas_ha_struct *ha = dev->port->ha;
- struct sas_phy *phy;
- unsigned long flags;
- /* a published domain device always has a valid phy, it may be
- * stale, but it is never NULL
- */
- BUG_ON(!dev->phy);
- spin_lock_irqsave(&ha->phy_port_lock, flags);
- phy = dev->phy;
- get_device(&phy->dev);
- spin_unlock_irqrestore(&ha->phy_port_lock, flags);
- return phy;
- }
- EXPORT_SYMBOL_GPL(sas_get_local_phy);
- static void sas_wait_eh(struct domain_device *dev)
- {
- struct sas_ha_struct *ha = dev->port->ha;
- DEFINE_WAIT(wait);
- if (dev_is_sata(dev)) {
- ata_port_wait_eh(dev->sata_dev.ap);
- return;
- }
- retry:
- spin_lock_irq(&ha->lock);
- while (test_bit(SAS_DEV_EH_PENDING, &dev->state)) {
- prepare_to_wait(&ha->eh_wait_q, &wait, TASK_UNINTERRUPTIBLE);
- spin_unlock_irq(&ha->lock);
- schedule();
- spin_lock_irq(&ha->lock);
- }
- finish_wait(&ha->eh_wait_q, &wait);
- spin_unlock_irq(&ha->lock);
- /* make sure SCSI EH is complete */
- if (scsi_host_in_recovery(ha->core.shost)) {
- msleep(10);
- goto retry;
- }
- }
- EXPORT_SYMBOL(sas_wait_eh);
- static int sas_queue_reset(struct domain_device *dev, int reset_type,
- u64 lun, int wait)
- {
- struct sas_ha_struct *ha = dev->port->ha;
- int scheduled = 0, tries = 100;
- /* ata: promote lun reset to bus reset */
- if (dev_is_sata(dev)) {
- sas_ata_schedule_reset(dev);
- if (wait)
- sas_ata_wait_eh(dev);
- return SUCCESS;
- }
- while (!scheduled && tries--) {
- spin_lock_irq(&ha->lock);
- if (!test_bit(SAS_DEV_EH_PENDING, &dev->state) &&
- !test_bit(reset_type, &dev->state)) {
- scheduled = 1;
- ha->eh_active++;
- list_add_tail(&dev->ssp_dev.eh_list_node, &ha->eh_dev_q);
- set_bit(SAS_DEV_EH_PENDING, &dev->state);
- set_bit(reset_type, &dev->state);
- int_to_scsilun(lun, &dev->ssp_dev.reset_lun);
- scsi_schedule_eh(ha->core.shost);
- }
- spin_unlock_irq(&ha->lock);
- if (wait)
- sas_wait_eh(dev);
- if (scheduled)
- return SUCCESS;
- }
- SAS_DPRINTK("%s reset of %s failed\n",
- reset_type == SAS_DEV_LU_RESET ? "LUN" : "Bus",
- dev_name(&dev->rphy->dev));
- return FAILED;
- }
- int sas_eh_abort_handler(struct scsi_cmnd *cmd)
- {
- int res;
- struct sas_task *task = TO_SAS_TASK(cmd);
- struct Scsi_Host *host = cmd->device->host;
- struct sas_internal *i = to_sas_internal(host->transportt);
- if (current != host->ehandler)
- return FAILED;
- if (!i->dft->lldd_abort_task)
- return FAILED;
- res = i->dft->lldd_abort_task(task);
- if (res == TMF_RESP_FUNC_SUCC || res == TMF_RESP_FUNC_COMPLETE)
- return SUCCESS;
- return FAILED;
- }
- EXPORT_SYMBOL_GPL(sas_eh_abort_handler);
- /* Attempt to send a LUN reset message to a device */
- int sas_eh_device_reset_handler(struct scsi_cmnd *cmd)
- {
- int res;
- struct scsi_lun lun;
- struct Scsi_Host *host = cmd->device->host;
- struct domain_device *dev = cmd_to_domain_dev(cmd);
- struct sas_internal *i = to_sas_internal(host->transportt);
- if (current != host->ehandler)
- return sas_queue_reset(dev, SAS_DEV_LU_RESET, cmd->device->lun, 0);
- int_to_scsilun(cmd->device->lun, &lun);
- if (!i->dft->lldd_lu_reset)
- return FAILED;
- res = i->dft->lldd_lu_reset(dev, lun.scsi_lun);
- if (res == TMF_RESP_FUNC_SUCC || res == TMF_RESP_FUNC_COMPLETE)
- return SUCCESS;
- return FAILED;
- }
- int sas_eh_bus_reset_handler(struct scsi_cmnd *cmd)
- {
- int res;
- struct Scsi_Host *host = cmd->device->host;
- struct domain_device *dev = cmd_to_domain_dev(cmd);
- struct sas_internal *i = to_sas_internal(host->transportt);
- if (current != host->ehandler)
- return sas_queue_reset(dev, SAS_DEV_RESET, 0, 0);
- if (!i->dft->lldd_I_T_nexus_reset)
- return FAILED;
- res = i->dft->lldd_I_T_nexus_reset(dev);
- if (res == TMF_RESP_FUNC_SUCC || res == TMF_RESP_FUNC_COMPLETE ||
- res == -ENODEV)
- return SUCCESS;
- return FAILED;
- }
- /* Try to reset a device */
- static int try_to_reset_cmd_device(struct scsi_cmnd *cmd)
- {
- int res;
- struct Scsi_Host *shost = cmd->device->host;
- if (!shost->hostt->eh_device_reset_handler)
- goto try_bus_reset;
- res = shost->hostt->eh_device_reset_handler(cmd);
- if (res == SUCCESS)
- return res;
- try_bus_reset:
- if (shost->hostt->eh_bus_reset_handler)
- return shost->hostt->eh_bus_reset_handler(cmd);
- return FAILED;
- }
- static void sas_eh_handle_sas_errors(struct Scsi_Host *shost, struct list_head *work_q)
- {
- struct scsi_cmnd *cmd, *n;
- enum task_disposition res = TASK_IS_DONE;
- int tmf_resp, need_reset;
- struct sas_internal *i = to_sas_internal(shost->transportt);
- unsigned long flags;
- struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
- LIST_HEAD(done);
- /* clean out any commands that won the completion vs eh race */
- list_for_each_entry_safe(cmd, n, work_q, eh_entry) {
- struct domain_device *dev = cmd_to_domain_dev(cmd);
- struct sas_task *task;
- spin_lock_irqsave(&dev->done_lock, flags);
- /* by this point the lldd has either observed
- * SAS_HA_FROZEN and is leaving the task alone, or has
- * won the race with eh and decided to complete it
- */
- task = TO_SAS_TASK(cmd);
- spin_unlock_irqrestore(&dev->done_lock, flags);
- if (!task)
- list_move_tail(&cmd->eh_entry, &done);
- }
- Again:
- list_for_each_entry_safe(cmd, n, work_q, eh_entry) {
- struct sas_task *task = TO_SAS_TASK(cmd);
- list_del_init(&cmd->eh_entry);
- spin_lock_irqsave(&task->task_state_lock, flags);
- need_reset = task->task_state_flags & SAS_TASK_NEED_DEV_RESET;
- spin_unlock_irqrestore(&task->task_state_lock, flags);
- if (need_reset) {
- SAS_DPRINTK("%s: task 0x%p requests reset\n",
- __func__, task);
- goto reset;
- }
- SAS_DPRINTK("trying to find task 0x%p\n", task);
- res = sas_scsi_find_task(task);
- cmd->eh_eflags = 0;
- switch (res) {
- case TASK_IS_DONE:
- SAS_DPRINTK("%s: task 0x%p is done\n", __func__,
- task);
- sas_eh_finish_cmd(cmd);
- continue;
- case TASK_IS_ABORTED:
- SAS_DPRINTK("%s: task 0x%p is aborted\n",
- __func__, task);
- sas_eh_finish_cmd(cmd);
- continue;
- case TASK_IS_AT_LU:
- SAS_DPRINTK("task 0x%p is at LU: lu recover\n", task);
- reset:
- tmf_resp = sas_recover_lu(task->dev, cmd);
- if (tmf_resp == TMF_RESP_FUNC_COMPLETE) {
- SAS_DPRINTK("dev %016llx LU %llx is "
- "recovered\n",
- SAS_ADDR(task->dev),
- cmd->device->lun);
- sas_eh_finish_cmd(cmd);
- sas_scsi_clear_queue_lu(work_q, cmd);
- goto Again;
- }
- /* fallthrough */
- case TASK_IS_NOT_AT_LU:
- case TASK_ABORT_FAILED:
- SAS_DPRINTK("task 0x%p is not at LU: I_T recover\n",
- task);
- tmf_resp = sas_recover_I_T(task->dev);
- if (tmf_resp == TMF_RESP_FUNC_COMPLETE ||
- tmf_resp == -ENODEV) {
- struct domain_device *dev = task->dev;
- SAS_DPRINTK("I_T %016llx recovered\n",
- SAS_ADDR(task->dev->sas_addr));
- sas_eh_finish_cmd(cmd);
- sas_scsi_clear_queue_I_T(work_q, dev);
- goto Again;
- }
- /* Hammer time :-) */
- try_to_reset_cmd_device(cmd);
- if (i->dft->lldd_clear_nexus_port) {
- struct asd_sas_port *port = task->dev->port;
- SAS_DPRINTK("clearing nexus for port:%d\n",
- port->id);
- res = i->dft->lldd_clear_nexus_port(port);
- if (res == TMF_RESP_FUNC_COMPLETE) {
- SAS_DPRINTK("clear nexus port:%d "
- "succeeded\n", port->id);
- sas_eh_finish_cmd(cmd);
- sas_scsi_clear_queue_port(work_q,
- port);
- goto Again;
- }
- }
- if (i->dft->lldd_clear_nexus_ha) {
- SAS_DPRINTK("clear nexus ha\n");
- res = i->dft->lldd_clear_nexus_ha(ha);
- if (res == TMF_RESP_FUNC_COMPLETE) {
- SAS_DPRINTK("clear nexus ha "
- "succeeded\n");
- sas_eh_finish_cmd(cmd);
- goto clear_q;
- }
- }
- /* If we are here -- this means that no amount
- * of effort could recover from errors. Quite
- * possibly the HA just disappeared.
- */
- SAS_DPRINTK("error from device %llx, LUN %llx "
- "couldn't be recovered in any way\n",
- SAS_ADDR(task->dev->sas_addr),
- cmd->device->lun);
- sas_eh_finish_cmd(cmd);
- goto clear_q;
- }
- }
- out:
- list_splice_tail(&done, work_q);
- list_splice_tail_init(&ha->eh_ata_q, work_q);
- return;
- clear_q:
- SAS_DPRINTK("--- Exit %s -- clear_q\n", __func__);
- list_for_each_entry_safe(cmd, n, work_q, eh_entry)
- sas_eh_finish_cmd(cmd);
- goto out;
- }
- static void sas_eh_handle_resets(struct Scsi_Host *shost)
- {
- struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
- struct sas_internal *i = to_sas_internal(shost->transportt);
- /* handle directed resets to sas devices */
- spin_lock_irq(&ha->lock);
- while (!list_empty(&ha->eh_dev_q)) {
- struct domain_device *dev;
- struct ssp_device *ssp;
- ssp = list_entry(ha->eh_dev_q.next, typeof(*ssp), eh_list_node);
- list_del_init(&ssp->eh_list_node);
- dev = container_of(ssp, typeof(*dev), ssp_dev);
- kref_get(&dev->kref);
- WARN_ONCE(dev_is_sata(dev), "ssp reset to ata device?\n");
- spin_unlock_irq(&ha->lock);
- if (test_and_clear_bit(SAS_DEV_LU_RESET, &dev->state))
- i->dft->lldd_lu_reset(dev, ssp->reset_lun.scsi_lun);
- if (test_and_clear_bit(SAS_DEV_RESET, &dev->state))
- i->dft->lldd_I_T_nexus_reset(dev);
- sas_put_device(dev);
- spin_lock_irq(&ha->lock);
- clear_bit(SAS_DEV_EH_PENDING, &dev->state);
- ha->eh_active--;
- }
- spin_unlock_irq(&ha->lock);
- }
- void sas_scsi_recover_host(struct Scsi_Host *shost)
- {
- struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
- LIST_HEAD(eh_work_q);
- int tries = 0;
- bool retry;
- retry:
- tries++;
- retry = true;
- spin_lock_irq(shost->host_lock);
- list_splice_init(&shost->eh_cmd_q, &eh_work_q);
- spin_unlock_irq(shost->host_lock);
- SAS_DPRINTK("Enter %s busy: %d failed: %d\n",
- __func__, atomic_read(&shost->host_busy), shost->host_failed);
- /*
- * Deal with commands that still have SAS tasks (i.e. they didn't
- * complete via the normal sas_task completion mechanism),
- * SAS_HA_FROZEN gives eh dominion over all sas_task completion.
- */
- set_bit(SAS_HA_FROZEN, &ha->state);
- sas_eh_handle_sas_errors(shost, &eh_work_q);
- clear_bit(SAS_HA_FROZEN, &ha->state);
- if (list_empty(&eh_work_q))
- goto out;
- /*
- * Now deal with SCSI commands that completed ok but have a an error
- * code (and hopefully sense data) attached. This is roughly what
- * scsi_unjam_host does, but we skip scsi_eh_abort_cmds because any
- * command we see here has no sas_task and is thus unknown to the HA.
- */
- sas_ata_eh(shost, &eh_work_q, &ha->eh_done_q);
- if (!scsi_eh_get_sense(&eh_work_q, &ha->eh_done_q))
- scsi_eh_ready_devs(shost, &eh_work_q, &ha->eh_done_q);
- out:
- sas_eh_handle_resets(shost);
- /* now link into libata eh --- if we have any ata devices */
- sas_ata_strategy_handler(shost);
- scsi_eh_flush_done_q(&ha->eh_done_q);
- /* check if any new eh work was scheduled during the last run */
- spin_lock_irq(&ha->lock);
- if (ha->eh_active == 0) {
- shost->host_eh_scheduled = 0;
- retry = false;
- }
- spin_unlock_irq(&ha->lock);
- if (retry)
- goto retry;
- SAS_DPRINTK("--- Exit %s: busy: %d failed: %d tries: %d\n",
- __func__, atomic_read(&shost->host_busy),
- shost->host_failed, tries);
- }
- enum blk_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *cmd)
- {
- scmd_dbg(cmd, "command %p timed out\n", cmd);
- return BLK_EH_NOT_HANDLED;
- }
- int sas_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
- {
- struct domain_device *dev = sdev_to_domain_dev(sdev);
- if (dev_is_sata(dev))
- return ata_sas_scsi_ioctl(dev->sata_dev.ap, sdev, cmd, arg);
- return -EINVAL;
- }
- struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy)
- {
- struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent);
- struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
- struct domain_device *found_dev = NULL;
- int i;
- unsigned long flags;
- spin_lock_irqsave(&ha->phy_port_lock, flags);
- for (i = 0; i < ha->num_phys; i++) {
- struct asd_sas_port *port = ha->sas_port[i];
- struct domain_device *dev;
- spin_lock(&port->dev_list_lock);
- list_for_each_entry(dev, &port->dev_list, dev_list_node) {
- if (rphy == dev->rphy) {
- found_dev = dev;
- spin_unlock(&port->dev_list_lock);
- goto found;
- }
- }
- spin_unlock(&port->dev_list_lock);
- }
- found:
- spin_unlock_irqrestore(&ha->phy_port_lock, flags);
- return found_dev;
- }
- int sas_target_alloc(struct scsi_target *starget)
- {
- struct sas_rphy *rphy = dev_to_rphy(starget->dev.parent);
- struct domain_device *found_dev = sas_find_dev_by_rphy(rphy);
- if (!found_dev)
- return -ENODEV;
- kref_get(&found_dev->kref);
- starget->hostdata = found_dev;
- return 0;
- }
- #define SAS_DEF_QD 256
- int sas_slave_configure(struct scsi_device *scsi_dev)
- {
- struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
- struct sas_ha_struct *sas_ha;
- BUG_ON(dev->rphy->identify.device_type != SAS_END_DEVICE);
- if (dev_is_sata(dev)) {
- ata_sas_slave_configure(scsi_dev, dev->sata_dev.ap);
- return 0;
- }
- sas_ha = dev->port->ha;
- sas_read_port_mode_page(scsi_dev);
- if (scsi_dev->tagged_supported) {
- scsi_change_queue_depth(scsi_dev, SAS_DEF_QD);
- } else {
- SAS_DPRINTK("device %llx, LUN %llx doesn't support "
- "TCQ\n", SAS_ADDR(dev->sas_addr),
- scsi_dev->lun);
- scsi_change_queue_depth(scsi_dev, 1);
- }
- scsi_dev->allow_restart = 1;
- return 0;
- }
- int sas_change_queue_depth(struct scsi_device *sdev, int depth)
- {
- struct domain_device *dev = sdev_to_domain_dev(sdev);
- if (dev_is_sata(dev))
- return __ata_change_queue_depth(dev->sata_dev.ap, sdev, depth);
- if (!sdev->tagged_supported)
- depth = 1;
- return scsi_change_queue_depth(sdev, depth);
- }
- int sas_bios_param(struct scsi_device *scsi_dev,
- struct block_device *bdev,
- sector_t capacity, int *hsc)
- {
- hsc[0] = 255;
- hsc[1] = 63;
- sector_div(capacity, 255*63);
- hsc[2] = capacity;
- return 0;
- }
- /*
- * Tell an upper layer that it needs to initiate an abort for a given task.
- * This should only ever be called by an LLDD.
- */
- void sas_task_abort(struct sas_task *task)
- {
- struct scsi_cmnd *sc = task->uldd_task;
- /* Escape for libsas internal commands */
- if (!sc) {
- struct sas_task_slow *slow = task->slow_task;
- if (!slow)
- return;
- if (!del_timer(&slow->timer))
- return;
- slow->timer.function(slow->timer.data);
- return;
- }
- if (dev_is_sata(task->dev)) {
- sas_ata_task_abort(task);
- } else {
- struct request_queue *q = sc->device->request_queue;
- unsigned long flags;
- spin_lock_irqsave(q->queue_lock, flags);
- blk_abort_request(sc->request);
- spin_unlock_irqrestore(q->queue_lock, flags);
- }
- }
- void sas_target_destroy(struct scsi_target *starget)
- {
- struct domain_device *found_dev = starget->hostdata;
- if (!found_dev)
- return;
- starget->hostdata = NULL;
- sas_put_device(found_dev);
- }
- static void sas_parse_addr(u8 *sas_addr, const char *p)
- {
- int i;
- for (i = 0; i < SAS_ADDR_SIZE; i++) {
- u8 h, l;
- if (!*p)
- break;
- h = isdigit(*p) ? *p-'0' : toupper(*p)-'A'+10;
- p++;
- l = isdigit(*p) ? *p-'0' : toupper(*p)-'A'+10;
- p++;
- sas_addr[i] = (h<<4) | l;
- }
- }
- #define SAS_STRING_ADDR_SIZE 16
- int sas_request_addr(struct Scsi_Host *shost, u8 *addr)
- {
- int res;
- const struct firmware *fw;
- res = request_firmware(&fw, "sas_addr", &shost->shost_gendev);
- if (res)
- return res;
- if (fw->size < SAS_STRING_ADDR_SIZE) {
- res = -ENODEV;
- goto out;
- }
- sas_parse_addr(addr, fw->data);
- out:
- release_firmware(fw);
- return res;
- }
- EXPORT_SYMBOL_GPL(sas_request_addr);
- EXPORT_SYMBOL_GPL(sas_queuecommand);
- EXPORT_SYMBOL_GPL(sas_target_alloc);
- EXPORT_SYMBOL_GPL(sas_slave_configure);
- EXPORT_SYMBOL_GPL(sas_change_queue_depth);
- EXPORT_SYMBOL_GPL(sas_bios_param);
- EXPORT_SYMBOL_GPL(sas_task_abort);
- EXPORT_SYMBOL_GPL(sas_phy_reset);
- EXPORT_SYMBOL_GPL(sas_eh_device_reset_handler);
- EXPORT_SYMBOL_GPL(sas_eh_bus_reset_handler);
- EXPORT_SYMBOL_GPL(sas_target_destroy);
- EXPORT_SYMBOL_GPL(sas_ioctl);
|