123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153 |
- /*
- * PCI interface driver for DW SPI Core
- *
- * Copyright (c) 2009, 2014 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- */
- #include <linux/interrupt.h>
- #include <linux/pci.h>
- #include <linux/slab.h>
- #include <linux/spi/spi.h>
- #include <linux/module.h>
- #include "spi-dw.h"
- #define DRIVER_NAME "dw_spi_pci"
- struct spi_pci_desc {
- int (*setup)(struct dw_spi *);
- u16 num_cs;
- u16 bus_num;
- };
- static struct spi_pci_desc spi_pci_mid_desc_1 = {
- .setup = dw_spi_mid_init,
- .num_cs = 5,
- .bus_num = 0,
- };
- static struct spi_pci_desc spi_pci_mid_desc_2 = {
- .setup = dw_spi_mid_init,
- .num_cs = 2,
- .bus_num = 1,
- };
- static int spi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
- {
- struct dw_spi *dws;
- struct spi_pci_desc *desc = (struct spi_pci_desc *)ent->driver_data;
- int pci_bar = 0;
- int ret;
- ret = pcim_enable_device(pdev);
- if (ret)
- return ret;
- dws = devm_kzalloc(&pdev->dev, sizeof(*dws), GFP_KERNEL);
- if (!dws)
- return -ENOMEM;
- /* Get basic io resource and map it */
- dws->paddr = pci_resource_start(pdev, pci_bar);
- ret = pcim_iomap_regions(pdev, 1 << pci_bar, pci_name(pdev));
- if (ret)
- return ret;
- dws->regs = pcim_iomap_table(pdev)[pci_bar];
- dws->irq = pdev->irq;
- /*
- * Specific handling for paltforms, like dma setup,
- * clock rate, FIFO depth.
- */
- if (desc) {
- dws->num_cs = desc->num_cs;
- dws->bus_num = desc->bus_num;
- if (desc->setup) {
- ret = desc->setup(dws);
- if (ret)
- return ret;
- }
- } else {
- return -ENODEV;
- }
- ret = dw_spi_add_host(&pdev->dev, dws);
- if (ret)
- return ret;
- /* PCI hook and SPI hook use the same drv data */
- pci_set_drvdata(pdev, dws);
- dev_info(&pdev->dev, "found PCI SPI controller(ID: %04x:%04x)\n",
- pdev->vendor, pdev->device);
- return 0;
- }
- static void spi_pci_remove(struct pci_dev *pdev)
- {
- struct dw_spi *dws = pci_get_drvdata(pdev);
- dw_spi_remove_host(dws);
- }
- #ifdef CONFIG_PM_SLEEP
- static int spi_suspend(struct device *dev)
- {
- struct pci_dev *pdev = to_pci_dev(dev);
- struct dw_spi *dws = pci_get_drvdata(pdev);
- return dw_spi_suspend_host(dws);
- }
- static int spi_resume(struct device *dev)
- {
- struct pci_dev *pdev = to_pci_dev(dev);
- struct dw_spi *dws = pci_get_drvdata(pdev);
- return dw_spi_resume_host(dws);
- }
- #endif
- static SIMPLE_DEV_PM_OPS(dw_spi_pm_ops, spi_suspend, spi_resume);
- static const struct pci_device_id pci_ids[] = {
- /* Intel MID platform SPI controller 0 */
- /*
- * The access to the device 8086:0801 is disabled by HW, since it's
- * exclusively used by SCU to communicate with MSIC.
- */
- /* Intel MID platform SPI controller 1 */
- { PCI_VDEVICE(INTEL, 0x0800), (kernel_ulong_t)&spi_pci_mid_desc_1},
- /* Intel MID platform SPI controller 2 */
- { PCI_VDEVICE(INTEL, 0x0812), (kernel_ulong_t)&spi_pci_mid_desc_2},
- {},
- };
- static struct pci_driver dw_spi_driver = {
- .name = DRIVER_NAME,
- .id_table = pci_ids,
- .probe = spi_pci_probe,
- .remove = spi_pci_remove,
- .driver = {
- .pm = &dw_spi_pm_ops,
- },
- };
- module_pci_driver(dw_spi_driver);
- MODULE_AUTHOR("Feng Tang <feng.tang@intel.com>");
- MODULE_DESCRIPTION("PCI interface driver for DW SPI Core");
- MODULE_LICENSE("GPL v2");
|