| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768 |
- #
- # USB/ATM DSL configuration
- #
- menuconfig USB_ATM
- tristate "USB DSL modem support"
- depends on ATM
- select CRC32
- default n
- help
- Say Y here if you want to connect a USB Digital Subscriber Line (DSL)
- modem to your computer's USB port. You will then need to choose your
- modem from the list below.
- To compile this driver as a module, choose M here: the
- module will be called usbatm.
- if USB_ATM
- config USB_SPEEDTOUCH
- tristate "Speedtouch USB support"
- select FW_LOADER
- help
- Say Y here if you have an SpeedTouch USB or SpeedTouch 330
- modem. In order to use your modem you will need to install the
- two parts of the firmware, extracted by the user space tools; see
- <http://www.linux-usb.org/SpeedTouch/> for details.
- To compile this driver as a module, choose M here: the
- module will be called speedtch.
- config USB_CXACRU
- tristate "Conexant AccessRunner USB support"
- select FW_LOADER
- help
- Say Y here if you have an ADSL USB modem based on the Conexant
- AccessRunner chipset. In order to use your modem you will need to
- install the firmware, extracted by the user space tools; see
- <http://accessrunner.sourceforge.net/> for details.
- To compile this driver as a module, choose M here: the
- module will be called cxacru.
- config USB_UEAGLEATM
- tristate "ADI 930 and eagle USB DSL modem"
- select FW_LOADER
- help
- Say Y here if you have an ADSL USB modem based on the ADI 930
- or eagle chipset. In order to use your modem you will need to
- install firmwares and CMV (Command Management Variables); see
- <https://gna.org/projects/ueagleatm/> for details.
- To compile this driver as a module, choose M here: the
- module will be called ueagle-atm.
- config USB_XUSBATM
- tristate "Other USB DSL modem support"
- help
- Say Y here if you have a DSL USB modem not explicitly supported by
- another USB DSL drivers. In order to use your modem you will need to
- pass the vendor ID, product ID, and endpoint numbers for transmission
- and reception as module parameters. You may need to initialize
- the modem using a user space utility (a firmware loader for example).
- To compile this driver as a module, choose M here: the
- module will be called xusbatm.
- endif # USB_ATM
|
