123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377 |
- /*
- * NOP USB transceiver for all USB transceiver which are either built-in
- * into USB IP or which are mostly autonomous.
- *
- * Copyright (C) 2009 Texas Instruments Inc
- * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Current status:
- * This provides a "nop" transceiver for PHYs which are
- * autonomous such as isp1504, isp1707, etc.
- */
- #include <linux/module.h>
- #include <linux/platform_device.h>
- #include <linux/dma-mapping.h>
- #include <linux/usb/gadget.h>
- #include <linux/usb/otg.h>
- #include <linux/usb/usb_phy_generic.h>
- #include <linux/slab.h>
- #include <linux/clk.h>
- #include <linux/regulator/consumer.h>
- #include <linux/of.h>
- #include <linux/of_gpio.h>
- #include <linux/gpio.h>
- #include <linux/delay.h>
- #include "phy-generic.h"
- #define VBUS_IRQ_FLAGS \
- (IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | \
- IRQF_ONESHOT)
- struct platform_device *usb_phy_generic_register(void)
- {
- return platform_device_register_simple("usb_phy_generic",
- PLATFORM_DEVID_AUTO, NULL, 0);
- }
- EXPORT_SYMBOL_GPL(usb_phy_generic_register);
- void usb_phy_generic_unregister(struct platform_device *pdev)
- {
- platform_device_unregister(pdev);
- }
- EXPORT_SYMBOL_GPL(usb_phy_generic_unregister);
- static int nop_set_suspend(struct usb_phy *x, int suspend)
- {
- return 0;
- }
- static void nop_reset(struct usb_phy_generic *nop)
- {
- if (!nop->gpiod_reset)
- return;
- gpiod_set_value(nop->gpiod_reset, 1);
- usleep_range(10000, 20000);
- gpiod_set_value(nop->gpiod_reset, 0);
- }
- /* interface to regulator framework */
- static void nop_set_vbus_draw(struct usb_phy_generic *nop, unsigned mA)
- {
- struct regulator *vbus_draw = nop->vbus_draw;
- int enabled;
- int ret;
- if (!vbus_draw)
- return;
- enabled = nop->vbus_draw_enabled;
- if (mA) {
- regulator_set_current_limit(vbus_draw, 0, 1000 * mA);
- if (!enabled) {
- ret = regulator_enable(vbus_draw);
- if (ret < 0)
- return;
- nop->vbus_draw_enabled = 1;
- }
- } else {
- if (enabled) {
- ret = regulator_disable(vbus_draw);
- if (ret < 0)
- return;
- nop->vbus_draw_enabled = 0;
- }
- }
- nop->mA = mA;
- }
- static irqreturn_t nop_gpio_vbus_thread(int irq, void *data)
- {
- struct usb_phy_generic *nop = data;
- struct usb_otg *otg = nop->phy.otg;
- int vbus, status;
- vbus = gpiod_get_value(nop->gpiod_vbus);
- if ((vbus ^ nop->vbus) == 0)
- return IRQ_HANDLED;
- nop->vbus = vbus;
- if (vbus) {
- status = USB_EVENT_VBUS;
- otg->state = OTG_STATE_B_PERIPHERAL;
- nop->phy.last_event = status;
- usb_gadget_vbus_connect(otg->gadget);
- /* drawing a "unit load" is *always* OK, except for OTG */
- nop_set_vbus_draw(nop, 100);
- atomic_notifier_call_chain(&nop->phy.notifier, status,
- otg->gadget);
- } else {
- nop_set_vbus_draw(nop, 0);
- usb_gadget_vbus_disconnect(otg->gadget);
- status = USB_EVENT_NONE;
- otg->state = OTG_STATE_B_IDLE;
- nop->phy.last_event = status;
- atomic_notifier_call_chain(&nop->phy.notifier, status,
- otg->gadget);
- }
- return IRQ_HANDLED;
- }
- int usb_gen_phy_init(struct usb_phy *phy)
- {
- struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
- if (!IS_ERR(nop->vcc)) {
- if (regulator_enable(nop->vcc))
- dev_err(phy->dev, "Failed to enable power\n");
- }
- if (!IS_ERR(nop->clk))
- clk_prepare_enable(nop->clk);
- nop_reset(nop);
- return 0;
- }
- EXPORT_SYMBOL_GPL(usb_gen_phy_init);
- void usb_gen_phy_shutdown(struct usb_phy *phy)
- {
- struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
- gpiod_set_value(nop->gpiod_reset, 1);
- if (!IS_ERR(nop->clk))
- clk_disable_unprepare(nop->clk);
- if (!IS_ERR(nop->vcc)) {
- if (regulator_disable(nop->vcc))
- dev_err(phy->dev, "Failed to disable power\n");
- }
- }
- EXPORT_SYMBOL_GPL(usb_gen_phy_shutdown);
- static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
- {
- if (!otg)
- return -ENODEV;
- if (!gadget) {
- otg->gadget = NULL;
- return -ENODEV;
- }
- otg->gadget = gadget;
- otg->state = OTG_STATE_B_IDLE;
- return 0;
- }
- static int nop_set_host(struct usb_otg *otg, struct usb_bus *host)
- {
- if (!otg)
- return -ENODEV;
- if (!host) {
- otg->host = NULL;
- return -ENODEV;
- }
- otg->host = host;
- return 0;
- }
- int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
- struct usb_phy_generic_platform_data *pdata)
- {
- enum usb_phy_type type = USB_PHY_TYPE_USB2;
- int err = 0;
- u32 clk_rate = 0;
- bool needs_vcc = false;
- if (dev->of_node) {
- struct device_node *node = dev->of_node;
- if (of_property_read_u32(node, "clock-frequency", &clk_rate))
- clk_rate = 0;
- needs_vcc = of_property_read_bool(node, "vcc-supply");
- nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset",
- GPIOD_ASIS);
- err = PTR_ERR_OR_ZERO(nop->gpiod_reset);
- if (!err) {
- nop->gpiod_vbus = devm_gpiod_get_optional(dev,
- "vbus-detect",
- GPIOD_ASIS);
- err = PTR_ERR_OR_ZERO(nop->gpiod_vbus);
- }
- } else if (pdata) {
- type = pdata->type;
- clk_rate = pdata->clk_rate;
- needs_vcc = pdata->needs_vcc;
- if (gpio_is_valid(pdata->gpio_reset)) {
- err = devm_gpio_request_one(dev, pdata->gpio_reset,
- GPIOF_ACTIVE_LOW,
- dev_name(dev));
- if (!err)
- nop->gpiod_reset =
- gpio_to_desc(pdata->gpio_reset);
- }
- nop->gpiod_vbus = pdata->gpiod_vbus;
- }
- if (err == -EPROBE_DEFER)
- return -EPROBE_DEFER;
- if (err) {
- dev_err(dev, "Error requesting RESET or VBUS GPIO\n");
- return err;
- }
- if (nop->gpiod_reset)
- gpiod_direction_output(nop->gpiod_reset, 1);
- nop->phy.otg = devm_kzalloc(dev, sizeof(*nop->phy.otg),
- GFP_KERNEL);
- if (!nop->phy.otg)
- return -ENOMEM;
- nop->clk = devm_clk_get(dev, "main_clk");
- if (IS_ERR(nop->clk)) {
- dev_dbg(dev, "Can't get phy clock: %ld\n",
- PTR_ERR(nop->clk));
- }
- if (!IS_ERR(nop->clk) && clk_rate) {
- err = clk_set_rate(nop->clk, clk_rate);
- if (err) {
- dev_err(dev, "Error setting clock rate\n");
- return err;
- }
- }
- nop->vcc = devm_regulator_get(dev, "vcc");
- if (IS_ERR(nop->vcc)) {
- dev_dbg(dev, "Error getting vcc regulator: %ld\n",
- PTR_ERR(nop->vcc));
- if (needs_vcc)
- return -EPROBE_DEFER;
- }
- nop->dev = dev;
- nop->phy.dev = nop->dev;
- nop->phy.label = "nop-xceiv";
- nop->phy.set_suspend = nop_set_suspend;
- nop->phy.type = type;
- nop->phy.otg->state = OTG_STATE_UNDEFINED;
- nop->phy.otg->usb_phy = &nop->phy;
- nop->phy.otg->set_host = nop_set_host;
- nop->phy.otg->set_peripheral = nop_set_peripheral;
- return 0;
- }
- EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy);
- static int usb_phy_generic_probe(struct platform_device *pdev)
- {
- struct device *dev = &pdev->dev;
- struct usb_phy_generic *nop;
- int err;
- nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL);
- if (!nop)
- return -ENOMEM;
- err = usb_phy_gen_create_phy(dev, nop, dev_get_platdata(&pdev->dev));
- if (err)
- return err;
- if (nop->gpiod_vbus) {
- err = devm_request_threaded_irq(&pdev->dev,
- gpiod_to_irq(nop->gpiod_vbus),
- NULL, nop_gpio_vbus_thread,
- VBUS_IRQ_FLAGS, "vbus_detect",
- nop);
- if (err) {
- dev_err(&pdev->dev, "can't request irq %i, err: %d\n",
- gpiod_to_irq(nop->gpiod_vbus), err);
- return err;
- }
- }
- nop->phy.init = usb_gen_phy_init;
- nop->phy.shutdown = usb_gen_phy_shutdown;
- err = usb_add_phy_dev(&nop->phy);
- if (err) {
- dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
- err);
- return err;
- }
- platform_set_drvdata(pdev, nop);
- return 0;
- }
- static int usb_phy_generic_remove(struct platform_device *pdev)
- {
- struct usb_phy_generic *nop = platform_get_drvdata(pdev);
- usb_remove_phy(&nop->phy);
- return 0;
- }
- static const struct of_device_id nop_xceiv_dt_ids[] = {
- { .compatible = "usb-nop-xceiv" },
- { }
- };
- MODULE_DEVICE_TABLE(of, nop_xceiv_dt_ids);
- static struct platform_driver usb_phy_generic_driver = {
- .probe = usb_phy_generic_probe,
- .remove = usb_phy_generic_remove,
- .driver = {
- .name = "usb_phy_generic",
- .of_match_table = nop_xceiv_dt_ids,
- },
- };
- static int __init usb_phy_generic_init(void)
- {
- return platform_driver_register(&usb_phy_generic_driver);
- }
- subsys_initcall(usb_phy_generic_init);
- static void __exit usb_phy_generic_exit(void)
- {
- platform_driver_unregister(&usb_phy_generic_driver);
- }
- module_exit(usb_phy_generic_exit);
- MODULE_ALIAS("platform:usb_phy_generic");
- MODULE_AUTHOR("Texas Instruments Inc");
- MODULE_DESCRIPTION("NOP USB Transceiver driver");
- MODULE_LICENSE("GPL");
|