123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237 |
- /*
- * w1-gpio - GPIO w1 bus master driver
- *
- * Copyright (C) 2007 Ville Syrjala <syrjala@sci.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- */
- #include <linux/init.h>
- #include <linux/module.h>
- #include <linux/platform_device.h>
- #include <linux/slab.h>
- #include <linux/w1-gpio.h>
- #include <linux/gpio.h>
- #include <linux/of_platform.h>
- #include <linux/of_gpio.h>
- #include <linux/err.h>
- #include <linux/of.h>
- #include <linux/delay.h>
- #include "../w1.h"
- #include "../w1_int.h"
- static u8 w1_gpio_set_pullup(void *data, int delay)
- {
- struct w1_gpio_platform_data *pdata = data;
- if (delay) {
- pdata->pullup_duration = delay;
- } else {
- if (pdata->pullup_duration) {
- gpio_direction_output(pdata->pin, 1);
- msleep(pdata->pullup_duration);
- gpio_direction_input(pdata->pin);
- }
- pdata->pullup_duration = 0;
- }
- return 0;
- }
- static void w1_gpio_write_bit_dir(void *data, u8 bit)
- {
- struct w1_gpio_platform_data *pdata = data;
- if (bit)
- gpio_direction_input(pdata->pin);
- else
- gpio_direction_output(pdata->pin, 0);
- }
- static void w1_gpio_write_bit_val(void *data, u8 bit)
- {
- struct w1_gpio_platform_data *pdata = data;
- gpio_set_value(pdata->pin, bit);
- }
- static u8 w1_gpio_read_bit(void *data)
- {
- struct w1_gpio_platform_data *pdata = data;
- return gpio_get_value(pdata->pin) ? 1 : 0;
- }
- #if defined(CONFIG_OF)
- static const struct of_device_id w1_gpio_dt_ids[] = {
- { .compatible = "w1-gpio" },
- {}
- };
- MODULE_DEVICE_TABLE(of, w1_gpio_dt_ids);
- #endif
- static int w1_gpio_probe_dt(struct platform_device *pdev)
- {
- struct w1_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev);
- struct device_node *np = pdev->dev.of_node;
- int gpio;
- pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- return -ENOMEM;
- if (of_get_property(np, "linux,open-drain", NULL))
- pdata->is_open_drain = 1;
- gpio = of_get_gpio(np, 0);
- if (gpio < 0) {
- if (gpio != -EPROBE_DEFER)
- dev_err(&pdev->dev,
- "Failed to parse gpio property for data pin (%d)\n",
- gpio);
- return gpio;
- }
- pdata->pin = gpio;
- gpio = of_get_gpio(np, 1);
- if (gpio == -EPROBE_DEFER)
- return gpio;
- /* ignore other errors as the pullup gpio is optional */
- pdata->ext_pullup_enable_pin = gpio;
- pdev->dev.platform_data = pdata;
- return 0;
- }
- static int w1_gpio_probe(struct platform_device *pdev)
- {
- struct w1_bus_master *master;
- struct w1_gpio_platform_data *pdata;
- int err;
- if (of_have_populated_dt()) {
- err = w1_gpio_probe_dt(pdev);
- if (err < 0)
- return err;
- }
- pdata = dev_get_platdata(&pdev->dev);
- if (!pdata) {
- dev_err(&pdev->dev, "No configuration data\n");
- return -ENXIO;
- }
- master = devm_kzalloc(&pdev->dev, sizeof(struct w1_bus_master),
- GFP_KERNEL);
- if (!master) {
- dev_err(&pdev->dev, "Out of memory\n");
- return -ENOMEM;
- }
- err = devm_gpio_request(&pdev->dev, pdata->pin, "w1");
- if (err) {
- dev_err(&pdev->dev, "gpio_request (pin) failed\n");
- return err;
- }
- if (gpio_is_valid(pdata->ext_pullup_enable_pin)) {
- err = devm_gpio_request_one(&pdev->dev,
- pdata->ext_pullup_enable_pin, GPIOF_INIT_LOW,
- "w1 pullup");
- if (err < 0) {
- dev_err(&pdev->dev, "gpio_request_one "
- "(ext_pullup_enable_pin) failed\n");
- return err;
- }
- }
- master->data = pdata;
- master->read_bit = w1_gpio_read_bit;
- if (pdata->is_open_drain) {
- gpio_direction_output(pdata->pin, 1);
- master->write_bit = w1_gpio_write_bit_val;
- } else {
- gpio_direction_input(pdata->pin);
- master->write_bit = w1_gpio_write_bit_dir;
- master->set_pullup = w1_gpio_set_pullup;
- }
- err = w1_add_master_device(master);
- if (err) {
- dev_err(&pdev->dev, "w1_add_master device failed\n");
- return err;
- }
- if (pdata->enable_external_pullup)
- pdata->enable_external_pullup(1);
- if (gpio_is_valid(pdata->ext_pullup_enable_pin))
- gpio_set_value(pdata->ext_pullup_enable_pin, 1);
- platform_set_drvdata(pdev, master);
- return 0;
- }
- static int w1_gpio_remove(struct platform_device *pdev)
- {
- struct w1_bus_master *master = platform_get_drvdata(pdev);
- struct w1_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev);
- if (pdata->enable_external_pullup)
- pdata->enable_external_pullup(0);
- if (gpio_is_valid(pdata->ext_pullup_enable_pin))
- gpio_set_value(pdata->ext_pullup_enable_pin, 0);
- w1_remove_master_device(master);
- return 0;
- }
- static int __maybe_unused w1_gpio_suspend(struct device *dev)
- {
- struct w1_gpio_platform_data *pdata = dev_get_platdata(dev);
- if (pdata->enable_external_pullup)
- pdata->enable_external_pullup(0);
- return 0;
- }
- static int __maybe_unused w1_gpio_resume(struct device *dev)
- {
- struct w1_gpio_platform_data *pdata = dev_get_platdata(dev);
- if (pdata->enable_external_pullup)
- pdata->enable_external_pullup(1);
- return 0;
- }
- static SIMPLE_DEV_PM_OPS(w1_gpio_pm_ops, w1_gpio_suspend, w1_gpio_resume);
- static struct platform_driver w1_gpio_driver = {
- .driver = {
- .name = "w1-gpio",
- .pm = &w1_gpio_pm_ops,
- .of_match_table = of_match_ptr(w1_gpio_dt_ids),
- },
- .probe = w1_gpio_probe,
- .remove = w1_gpio_remove,
- };
- module_platform_driver(w1_gpio_driver);
- MODULE_DESCRIPTION("GPIO w1 bus master driver");
- MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
- MODULE_LICENSE("GPL");
|