123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234 |
- /*
- * drivers/char/watchdog/pnx4008_wdt.c
- *
- * Watchdog driver for PNX4008 board
- *
- * Authors: Dmitry Chigirev <source@mvista.com>,
- * Vitaly Wool <vitalywool@gmail.com>
- * Based on sa1100 driver,
- * Copyright (C) 2000 Oleg Drokin <green@crimea.edu>
- *
- * 2005-2006 (c) MontaVista Software, Inc.
- *
- * (C) 2012 Wolfram Sang, Pengutronix
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
- #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
- #include <linux/module.h>
- #include <linux/moduleparam.h>
- #include <linux/types.h>
- #include <linux/kernel.h>
- #include <linux/watchdog.h>
- #include <linux/platform_device.h>
- #include <linux/clk.h>
- #include <linux/spinlock.h>
- #include <linux/io.h>
- #include <linux/slab.h>
- #include <linux/err.h>
- #include <linux/of.h>
- #include <mach/hardware.h>
- /* WatchDog Timer - Chapter 23 Page 207 */
- #define DEFAULT_HEARTBEAT 19
- #define MAX_HEARTBEAT 60
- /* Watchdog timer register set definition */
- #define WDTIM_INT(p) ((p) + 0x0)
- #define WDTIM_CTRL(p) ((p) + 0x4)
- #define WDTIM_COUNTER(p) ((p) + 0x8)
- #define WDTIM_MCTRL(p) ((p) + 0xC)
- #define WDTIM_MATCH0(p) ((p) + 0x10)
- #define WDTIM_EMR(p) ((p) + 0x14)
- #define WDTIM_PULSE(p) ((p) + 0x18)
- #define WDTIM_RES(p) ((p) + 0x1C)
- /* WDTIM_INT bit definitions */
- #define MATCH_INT 1
- /* WDTIM_CTRL bit definitions */
- #define COUNT_ENAB 1
- #define RESET_COUNT (1 << 1)
- #define DEBUG_EN (1 << 2)
- /* WDTIM_MCTRL bit definitions */
- #define MR0_INT 1
- #undef RESET_COUNT0
- #define RESET_COUNT0 (1 << 2)
- #define STOP_COUNT0 (1 << 2)
- #define M_RES1 (1 << 3)
- #define M_RES2 (1 << 4)
- #define RESFRC1 (1 << 5)
- #define RESFRC2 (1 << 6)
- /* WDTIM_EMR bit definitions */
- #define EXT_MATCH0 1
- #define MATCH_OUTPUT_HIGH (2 << 4) /*a MATCH_CTRL setting */
- /* WDTIM_RES bit definitions */
- #define WDOG_RESET 1 /* read only */
- #define WDOG_COUNTER_RATE 13000000 /*the counter clock is 13 MHz fixed */
- static bool nowayout = WATCHDOG_NOWAYOUT;
- static unsigned int heartbeat = DEFAULT_HEARTBEAT;
- static DEFINE_SPINLOCK(io_lock);
- static void __iomem *wdt_base;
- static struct clk *wdt_clk;
- static int pnx4008_wdt_start(struct watchdog_device *wdd)
- {
- spin_lock(&io_lock);
- /* stop counter, initiate counter reset */
- writel(RESET_COUNT, WDTIM_CTRL(wdt_base));
- /*wait for reset to complete. 100% guarantee event */
- while (readl(WDTIM_COUNTER(wdt_base)))
- cpu_relax();
- /* internal and external reset, stop after that */
- writel(M_RES2 | STOP_COUNT0 | RESET_COUNT0, WDTIM_MCTRL(wdt_base));
- /* configure match output */
- writel(MATCH_OUTPUT_HIGH, WDTIM_EMR(wdt_base));
- /* clear interrupt, just in case */
- writel(MATCH_INT, WDTIM_INT(wdt_base));
- /* the longest pulse period 65541/(13*10^6) seconds ~ 5 ms. */
- writel(0xFFFF, WDTIM_PULSE(wdt_base));
- writel(wdd->timeout * WDOG_COUNTER_RATE, WDTIM_MATCH0(wdt_base));
- /*enable counter, stop when debugger active */
- writel(COUNT_ENAB | DEBUG_EN, WDTIM_CTRL(wdt_base));
- spin_unlock(&io_lock);
- return 0;
- }
- static int pnx4008_wdt_stop(struct watchdog_device *wdd)
- {
- spin_lock(&io_lock);
- writel(0, WDTIM_CTRL(wdt_base)); /*stop counter */
- spin_unlock(&io_lock);
- return 0;
- }
- static int pnx4008_wdt_set_timeout(struct watchdog_device *wdd,
- unsigned int new_timeout)
- {
- wdd->timeout = new_timeout;
- return 0;
- }
- static const struct watchdog_info pnx4008_wdt_ident = {
- .options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE |
- WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
- .identity = "PNX4008 Watchdog",
- };
- static const struct watchdog_ops pnx4008_wdt_ops = {
- .owner = THIS_MODULE,
- .start = pnx4008_wdt_start,
- .stop = pnx4008_wdt_stop,
- .set_timeout = pnx4008_wdt_set_timeout,
- };
- static struct watchdog_device pnx4008_wdd = {
- .info = &pnx4008_wdt_ident,
- .ops = &pnx4008_wdt_ops,
- .timeout = DEFAULT_HEARTBEAT,
- .min_timeout = 1,
- .max_timeout = MAX_HEARTBEAT,
- };
- static int pnx4008_wdt_probe(struct platform_device *pdev)
- {
- struct resource *r;
- int ret = 0;
- watchdog_init_timeout(&pnx4008_wdd, heartbeat, &pdev->dev);
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- wdt_base = devm_ioremap_resource(&pdev->dev, r);
- if (IS_ERR(wdt_base))
- return PTR_ERR(wdt_base);
- wdt_clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(wdt_clk))
- return PTR_ERR(wdt_clk);
- ret = clk_prepare_enable(wdt_clk);
- if (ret)
- return ret;
- pnx4008_wdd.bootstatus = (readl(WDTIM_RES(wdt_base)) & WDOG_RESET) ?
- WDIOF_CARDRESET : 0;
- pnx4008_wdd.parent = &pdev->dev;
- watchdog_set_nowayout(&pnx4008_wdd, nowayout);
- pnx4008_wdt_stop(&pnx4008_wdd); /* disable for now */
- ret = watchdog_register_device(&pnx4008_wdd);
- if (ret < 0) {
- dev_err(&pdev->dev, "cannot register watchdog device\n");
- goto disable_clk;
- }
- dev_info(&pdev->dev, "PNX4008 Watchdog Timer: heartbeat %d sec\n",
- pnx4008_wdd.timeout);
- return 0;
- disable_clk:
- clk_disable_unprepare(wdt_clk);
- return ret;
- }
- static int pnx4008_wdt_remove(struct platform_device *pdev)
- {
- watchdog_unregister_device(&pnx4008_wdd);
- clk_disable_unprepare(wdt_clk);
- return 0;
- }
- #ifdef CONFIG_OF
- static const struct of_device_id pnx4008_wdt_match[] = {
- { .compatible = "nxp,pnx4008-wdt" },
- { }
- };
- MODULE_DEVICE_TABLE(of, pnx4008_wdt_match);
- #endif
- static struct platform_driver platform_wdt_driver = {
- .driver = {
- .name = "pnx4008-watchdog",
- .of_match_table = of_match_ptr(pnx4008_wdt_match),
- },
- .probe = pnx4008_wdt_probe,
- .remove = pnx4008_wdt_remove,
- };
- module_platform_driver(platform_wdt_driver);
- MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
- MODULE_AUTHOR("Wolfram Sang <kernel@pengutronix.de>");
- MODULE_DESCRIPTION("PNX4008 Watchdog Driver");
- module_param(heartbeat, uint, 0);
- MODULE_PARM_DESC(heartbeat,
- "Watchdog heartbeat period in seconds from 1 to "
- __MODULE_STRING(MAX_HEARTBEAT) ", default "
- __MODULE_STRING(DEFAULT_HEARTBEAT));
- module_param(nowayout, bool, 0);
- MODULE_PARM_DESC(nowayout,
- "Set to 1 to keep watchdog running after device release");
- MODULE_LICENSE("GPL");
- MODULE_ALIAS("platform:pnx4008-watchdog");
|