123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195 |
- /*
- * Watchdog driver for the SA11x0/PXA2xx
- *
- * (c) Copyright 2000 Oleg Drokin <green@crimea.edu>
- * Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Neither Oleg Drokin nor iXcelerator.com admit liability nor provide
- * warranty for any of this software. This material is provided
- * "AS-IS" and at no charge.
- *
- * (c) Copyright 2000 Oleg Drokin <green@crimea.edu>
- *
- * 27/11/2000 Initial release
- */
- #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
- #include <linux/module.h>
- #include <linux/moduleparam.h>
- #include <linux/types.h>
- #include <linux/kernel.h>
- #include <linux/fs.h>
- #include <linux/miscdevice.h>
- #include <linux/watchdog.h>
- #include <linux/init.h>
- #include <linux/io.h>
- #include <linux/bitops.h>
- #include <linux/uaccess.h>
- #include <linux/timex.h>
- #ifdef CONFIG_ARCH_PXA
- #include <mach/regs-ost.h>
- #endif
- #include <mach/reset.h>
- #include <mach/hardware.h>
- static unsigned long oscr_freq;
- static unsigned long sa1100wdt_users;
- static unsigned int pre_margin;
- static int boot_status;
- /*
- * Allow only one person to hold it open
- */
- static int sa1100dog_open(struct inode *inode, struct file *file)
- {
- if (test_and_set_bit(1, &sa1100wdt_users))
- return -EBUSY;
- /* Activate SA1100 Watchdog timer */
- writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
- writel_relaxed(OSSR_M3, OSSR);
- writel_relaxed(OWER_WME, OWER);
- writel_relaxed(readl_relaxed(OIER) | OIER_E3, OIER);
- return nonseekable_open(inode, file);
- }
- /*
- * The watchdog cannot be disabled.
- *
- * Previous comments suggested that turning off the interrupt by
- * clearing OIER[E3] would prevent the watchdog timing out but this
- * does not appear to be true (at least on the PXA255).
- */
- static int sa1100dog_release(struct inode *inode, struct file *file)
- {
- pr_crit("Device closed - timer will not stop\n");
- clear_bit(1, &sa1100wdt_users);
- return 0;
- }
- static ssize_t sa1100dog_write(struct file *file, const char __user *data,
- size_t len, loff_t *ppos)
- {
- if (len)
- /* Refresh OSMR3 timer. */
- writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
- return len;
- }
- static const struct watchdog_info ident = {
- .options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT
- | WDIOF_KEEPALIVEPING,
- .identity = "SA1100/PXA255 Watchdog",
- .firmware_version = 1,
- };
- static long sa1100dog_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
- {
- int ret = -ENOTTY;
- int time;
- void __user *argp = (void __user *)arg;
- int __user *p = argp;
- switch (cmd) {
- case WDIOC_GETSUPPORT:
- ret = copy_to_user(argp, &ident,
- sizeof(ident)) ? -EFAULT : 0;
- break;
- case WDIOC_GETSTATUS:
- ret = put_user(0, p);
- break;
- case WDIOC_GETBOOTSTATUS:
- ret = put_user(boot_status, p);
- break;
- case WDIOC_KEEPALIVE:
- writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
- ret = 0;
- break;
- case WDIOC_SETTIMEOUT:
- ret = get_user(time, p);
- if (ret)
- break;
- if (time <= 0 || (oscr_freq * (long long)time >= 0xffffffff)) {
- ret = -EINVAL;
- break;
- }
- pre_margin = oscr_freq * time;
- writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
- /*fall through*/
- case WDIOC_GETTIMEOUT:
- ret = put_user(pre_margin / oscr_freq, p);
- break;
- }
- return ret;
- }
- static const struct file_operations sa1100dog_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .write = sa1100dog_write,
- .unlocked_ioctl = sa1100dog_ioctl,
- .open = sa1100dog_open,
- .release = sa1100dog_release,
- };
- static struct miscdevice sa1100dog_miscdev = {
- .minor = WATCHDOG_MINOR,
- .name = "watchdog",
- .fops = &sa1100dog_fops,
- };
- static int margin __initdata = 60; /* (secs) Default is 1 minute */
- static int __init sa1100dog_init(void)
- {
- int ret;
- oscr_freq = get_clock_tick_rate();
- /*
- * Read the reset status, and save it for later. If
- * we suspend, RCSR will be cleared, and the watchdog
- * reset reason will be lost.
- */
- boot_status = (reset_status & RESET_STATUS_WATCHDOG) ?
- WDIOF_CARDRESET : 0;
- pre_margin = oscr_freq * margin;
- ret = misc_register(&sa1100dog_miscdev);
- if (ret == 0)
- pr_info("SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n",
- margin);
- return ret;
- }
- static void __exit sa1100dog_exit(void)
- {
- misc_deregister(&sa1100dog_miscdev);
- }
- module_init(sa1100dog_init);
- module_exit(sa1100dog_exit);
- MODULE_AUTHOR("Oleg Drokin <green@crimea.edu>");
- MODULE_DESCRIPTION("SA1100/PXA2xx Watchdog");
- module_param(margin, int, 0);
- MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)");
- MODULE_LICENSE("GPL");
|