123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128 |
- /*
- * ADF4350/ADF4351 SPI PLL driver
- *
- * Copyright 2012-2013 Analog Devices Inc.
- *
- * Licensed under the GPL-2.
- */
- #ifndef IIO_PLL_ADF4350_H_
- #define IIO_PLL_ADF4350_H_
- /* Registers */
- #define ADF4350_REG0 0
- #define ADF4350_REG1 1
- #define ADF4350_REG2 2
- #define ADF4350_REG3 3
- #define ADF4350_REG4 4
- #define ADF4350_REG5 5
- /* REG0 Bit Definitions */
- #define ADF4350_REG0_FRACT(x) (((x) & 0xFFF) << 3)
- #define ADF4350_REG0_INT(x) (((x) & 0xFFFF) << 15)
- /* REG1 Bit Definitions */
- #define ADF4350_REG1_MOD(x) (((x) & 0xFFF) << 3)
- #define ADF4350_REG1_PHASE(x) (((x) & 0xFFF) << 15)
- #define ADF4350_REG1_PRESCALER (1 << 27)
- /* REG2 Bit Definitions */
- #define ADF4350_REG2_COUNTER_RESET_EN (1 << 3)
- #define ADF4350_REG2_CP_THREESTATE_EN (1 << 4)
- #define ADF4350_REG2_POWER_DOWN_EN (1 << 5)
- #define ADF4350_REG2_PD_POLARITY_POS (1 << 6)
- #define ADF4350_REG2_LDP_6ns (1 << 7)
- #define ADF4350_REG2_LDP_10ns (0 << 7)
- #define ADF4350_REG2_LDF_FRACT_N (0 << 8)
- #define ADF4350_REG2_LDF_INT_N (1 << 8)
- #define ADF4350_REG2_CHARGE_PUMP_CURR_uA(x) (((((x)-312) / 312) & 0xF) << 9)
- #define ADF4350_REG2_DOUBLE_BUFF_EN (1 << 13)
- #define ADF4350_REG2_10BIT_R_CNT(x) ((x) << 14)
- #define ADF4350_REG2_RDIV2_EN (1 << 24)
- #define ADF4350_REG2_RMULT2_EN (1 << 25)
- #define ADF4350_REG2_MUXOUT(x) ((x) << 26)
- #define ADF4350_REG2_NOISE_MODE(x) (((unsigned)(x)) << 29)
- #define ADF4350_MUXOUT_THREESTATE 0
- #define ADF4350_MUXOUT_DVDD 1
- #define ADF4350_MUXOUT_GND 2
- #define ADF4350_MUXOUT_R_DIV_OUT 3
- #define ADF4350_MUXOUT_N_DIV_OUT 4
- #define ADF4350_MUXOUT_ANALOG_LOCK_DETECT 5
- #define ADF4350_MUXOUT_DIGITAL_LOCK_DETECT 6
- /* REG3 Bit Definitions */
- #define ADF4350_REG3_12BIT_CLKDIV(x) ((x) << 3)
- #define ADF4350_REG3_12BIT_CLKDIV_MODE(x) ((x) << 16)
- #define ADF4350_REG3_12BIT_CSR_EN (1 << 18)
- #define ADF4351_REG3_CHARGE_CANCELLATION_EN (1 << 21)
- #define ADF4351_REG3_ANTI_BACKLASH_3ns_EN (1 << 22)
- #define ADF4351_REG3_BAND_SEL_CLOCK_MODE_HIGH (1 << 23)
- /* REG4 Bit Definitions */
- #define ADF4350_REG4_OUTPUT_PWR(x) ((x) << 3)
- #define ADF4350_REG4_RF_OUT_EN (1 << 5)
- #define ADF4350_REG4_AUX_OUTPUT_PWR(x) ((x) << 6)
- #define ADF4350_REG4_AUX_OUTPUT_EN (1 << 8)
- #define ADF4350_REG4_AUX_OUTPUT_FUND (1 << 9)
- #define ADF4350_REG4_AUX_OUTPUT_DIV (0 << 9)
- #define ADF4350_REG4_MUTE_TILL_LOCK_EN (1 << 10)
- #define ADF4350_REG4_VCO_PWRDOWN_EN (1 << 11)
- #define ADF4350_REG4_8BIT_BAND_SEL_CLKDIV(x) ((x) << 12)
- #define ADF4350_REG4_RF_DIV_SEL(x) ((x) << 20)
- #define ADF4350_REG4_FEEDBACK_DIVIDED (0 << 23)
- #define ADF4350_REG4_FEEDBACK_FUND (1 << 23)
- /* REG5 Bit Definitions */
- #define ADF4350_REG5_LD_PIN_MODE_LOW (0 << 22)
- #define ADF4350_REG5_LD_PIN_MODE_DIGITAL (1 << 22)
- #define ADF4350_REG5_LD_PIN_MODE_HIGH (3 << 22)
- /* Specifications */
- #define ADF4350_MAX_OUT_FREQ 4400000000ULL /* Hz */
- #define ADF4350_MIN_OUT_FREQ 137500000 /* Hz */
- #define ADF4351_MIN_OUT_FREQ 34375000 /* Hz */
- #define ADF4350_MIN_VCO_FREQ 2200000000ULL /* Hz */
- #define ADF4350_MAX_FREQ_45_PRESC 3000000000ULL /* Hz */
- #define ADF4350_MAX_FREQ_PFD 32000000 /* Hz */
- #define ADF4350_MAX_BANDSEL_CLK 125000 /* Hz */
- #define ADF4350_MAX_FREQ_REFIN 250000000 /* Hz */
- #define ADF4350_MAX_MODULUS 4095
- #define ADF4350_MAX_R_CNT 1023
- /**
- * struct adf4350_platform_data - platform specific information
- * @name: Optional device name.
- * @clkin: REFin frequency in Hz.
- * @channel_spacing: Channel spacing in Hz (influences MODULUS).
- * @power_up_frequency: Optional, If set in Hz the PLL tunes to the desired
- * frequency on probe.
- * @ref_div_factor: Optional, if set the driver skips dynamic calculation
- * and uses this default value instead.
- * @ref_doubler_en: Enables reference doubler.
- * @ref_div2_en: Enables reference divider.
- * @r2_user_settings: User defined settings for ADF4350/1 REGISTER_2.
- * @r3_user_settings: User defined settings for ADF4350/1 REGISTER_3.
- * @r4_user_settings: User defined settings for ADF4350/1 REGISTER_4.
- * @gpio_lock_detect: Optional, if set with a valid GPIO number,
- * pll lock state is tested upon read.
- * If not used - set to -1.
- */
- struct adf4350_platform_data {
- char name[32];
- unsigned long clkin;
- unsigned long channel_spacing;
- unsigned long long power_up_frequency;
- unsigned short ref_div_factor; /* 10-bit R counter */
- bool ref_doubler_en;
- bool ref_div2_en;
- unsigned r2_user_settings;
- unsigned r3_user_settings;
- unsigned r4_user_settings;
- int gpio_lock_detect;
- };
- #endif /* IIO_PLL_ADF4350_H_ */
|