htc-egpio.h 1.7 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657
  1. /*
  2. * HTC simple EGPIO irq and gpio extender
  3. */
  4. #ifndef __HTC_EGPIO_H__
  5. #define __HTC_EGPIO_H__
  6. #include <linux/gpio.h>
  7. /* Descriptive values for all-in or all-out htc_egpio_chip descriptors. */
  8. #define HTC_EGPIO_OUTPUT (~0)
  9. #define HTC_EGPIO_INPUT 0
  10. /**
  11. * struct htc_egpio_chip - descriptor to create gpio_chip for register range
  12. * @reg_start: index of first register
  13. * @gpio_base: gpio number of first pin in this register range
  14. * @num_gpios: number of gpios in this register range, max BITS_PER_LONG
  15. * (number of registers = DIV_ROUND_UP(num_gpios, reg_width))
  16. * @direction: bitfield, '0' = input, '1' = output,
  17. */
  18. struct htc_egpio_chip {
  19. int reg_start;
  20. int gpio_base;
  21. int num_gpios;
  22. unsigned long direction;
  23. unsigned long initial_values;
  24. };
  25. /**
  26. * struct htc_egpio_platform_data - description provided by the arch
  27. * @irq_base: beginning of available IRQs (eg, IRQ_BOARD_START)
  28. * @num_irqs: number of irqs
  29. * @reg_width: number of bits per register, either 8 or 16 bit
  30. * @bus_width: alignment of the registers, either 16 or 32 bit
  31. * @invert_acks: set if chip requires writing '0' to ack an irq, instead of '1'
  32. * @ack_register: location of the irq/ack register
  33. * @chip: pointer to array of htc_egpio_chip descriptors
  34. * @num_chips: number of egpio chip descriptors
  35. */
  36. struct htc_egpio_platform_data {
  37. int bus_width;
  38. int reg_width;
  39. int irq_base;
  40. int num_irqs;
  41. int invert_acks;
  42. int ack_register;
  43. struct htc_egpio_chip *chip;
  44. int num_chips;
  45. };
  46. /* Determine the wakeup irq, to be called during early resume */
  47. extern int htc_egpio_get_wakeup_irq(struct device *dev);
  48. #endif