CooCenter-System-kernel/include/linux/mfd/syscon/atmel-smc.h

/*
 * Atmel SMC (Static Memory Controller) register offsets and bit definitions.
 *
 * Copyright (C) 2014 Atmel
 * Copyright (C) 2014 Free Electrons
 *
 * Author: Boris Brezillon <boris.brezillon@free-electrons.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#ifndef _LINUX_MFD_SYSCON_ATMEL_SMC_H_
#define _LINUX_MFD_SYSCON_ATMEL_SMC_H_

#include <linux/kernel.h>
#include <linux/regmap.h>

#define AT91SAM9_SMC_GENERIC		0x00
#define AT91SAM9_SMC_GENERIC_BLK_SZ	0x10

#define SAMA5_SMC_GENERIC		0x600
#define SAMA5_SMC_GENERIC_BLK_SZ	0x14

#define AT91SAM9_SMC_SETUP(o)		((o) + 0x00)
#define AT91SAM9_SMC_NWESETUP(x)	(x)
#define AT91SAM9_SMC_NCS_WRSETUP(x)	((x) << 8)
#define AT91SAM9_SMC_NRDSETUP(x)	((x) << 16)
#define AT91SAM9_SMC_NCS_NRDSETUP(x)	((x) << 24)

#define AT91SAM9_SMC_PULSE(o)		((o) + 0x04)
#define AT91SAM9_SMC_NWEPULSE(x)	(x)
#define AT91SAM9_SMC_NCS_WRPULSE(x)	((x) << 8)
#define AT91SAM9_SMC_NRDPULSE(x)	((x) << 16)
#define AT91SAM9_SMC_NCS_NRDPULSE(x)	((x) << 24)

#define AT91SAM9_SMC_CYCLE(o)		((o) + 0x08)
#define AT91SAM9_SMC_NWECYCLE(x)	(x)
#define AT91SAM9_SMC_NRDCYCLE(x)	((x) << 16)

#define AT91SAM9_SMC_MODE(o)		((o) + 0x0c)
#define SAMA5_SMC_MODE(o)		((o) + 0x10)
#define AT91_SMC_READMODE		BIT(0)
#define AT91_SMC_READMODE_NCS		(0 << 0)
#define AT91_SMC_READMODE_NRD		(1 << 0)
#define AT91_SMC_WRITEMODE		BIT(1)
#define AT91_SMC_WRITEMODE_NCS		(0 << 1)
#define AT91_SMC_WRITEMODE_NWE		(1 << 1)
#define AT91_SMC_EXNWMODE		GENMASK(5, 4)
#define AT91_SMC_EXNWMODE_DISABLE	(0 << 4)
#define AT91_SMC_EXNWMODE_FROZEN	(2 << 4)
#define AT91_SMC_EXNWMODE_READY		(3 << 4)
#define AT91_SMC_BAT			BIT(8)
#define AT91_SMC_BAT_SELECT		(0 << 8)
#define AT91_SMC_BAT_WRITE		(1 << 8)
#define AT91_SMC_DBW			GENMASK(13, 12)
#define AT91_SMC_DBW_8			(0 << 12)
#define AT91_SMC_DBW_16			(1 << 12)
#define AT91_SMC_DBW_32			(2 << 12)
#define AT91_SMC_TDF			GENMASK(19, 16)
#define AT91_SMC_TDF_(x)		((((x) - 1) << 16) & AT91_SMC_TDF)
#define AT91_SMC_TDF_MAX		16
#define AT91_SMC_TDFMODE_OPTIMIZED	BIT(20)
#define AT91_SMC_PMEN			BIT(24)
#define AT91_SMC_PS			GENMASK(29, 28)
#define AT91_SMC_PS_4			(0 << 28)
#define AT91_SMC_PS_8			(1 << 28)
#define AT91_SMC_PS_16			(2 << 28)
#define AT91_SMC_PS_32			(3 << 28)


/*
 * This function converts a setup timing expressed in nanoseconds into an
 * encoded value that can be written in the SMC_SETUP register.
 *
 * The following formula is described in atmel datasheets (section
 * "SMC Setup Register"):
 *
 * setup length = (128* SETUP[5] + SETUP[4:0])
 *
 * where setup length is the timing expressed in cycles.
 */
static inline u32 at91sam9_smc_setup_ns_to_cycles(unsigned int clk_rate,
						  u32 timing_ns)
{
	u32 clk_period = DIV_ROUND_UP(NSEC_PER_SEC, clk_rate);
	u32 coded_cycles = 0;
	u32 cycles;

	cycles = DIV_ROUND_UP(timing_ns, clk_period);
	if (cycles / 32) {
		coded_cycles |= 1 << 5;
		if (cycles < 128)
			cycles = 0;
	}

	coded_cycles |= cycles % 32;

	return coded_cycles;
}

/*
 * This function converts a pulse timing expressed in nanoseconds into an
 * encoded value that can be written in the SMC_PULSE register.
 *
 * The following formula is described in atmel datasheets (section
 * "SMC Pulse Register"):
 *
 * pulse length = (256* PULSE[6] + PULSE[5:0])
 *
 * where pulse length is the timing expressed in cycles.
 */
static inline u32 at91sam9_smc_pulse_ns_to_cycles(unsigned int clk_rate,
						  u32 timing_ns)
{
	u32 clk_period = DIV_ROUND_UP(NSEC_PER_SEC, clk_rate);
	u32 coded_cycles = 0;
	u32 cycles;

	cycles = DIV_ROUND_UP(timing_ns, clk_period);
	if (cycles / 64) {
		coded_cycles |= 1 << 6;
		if (cycles < 256)
			cycles = 0;
	}

	coded_cycles |= cycles % 64;

	return coded_cycles;
}

/*
 * This function converts a cycle timing expressed in nanoseconds into an
 * encoded value that can be written in the SMC_CYCLE register.
 *
 * The following formula is described in atmel datasheets (section
 * "SMC Cycle Register"):
 *
 * cycle length = (CYCLE[8:7]*256 + CYCLE[6:0])
 *
 * where cycle length is the timing expressed in cycles.
 */
static inline u32 at91sam9_smc_cycle_ns_to_cycles(unsigned int clk_rate,
						  u32 timing_ns)
{
	u32 clk_period = DIV_ROUND_UP(NSEC_PER_SEC, clk_rate);
	u32 coded_cycles = 0;
	u32 cycles;

	cycles = DIV_ROUND_UP(timing_ns, clk_period);
	if (cycles / 128) {
		coded_cycles = cycles / 256;
		cycles %= 256;
		if (cycles >= 128) {
			coded_cycles++;
			cycles = 0;
		}

		if (coded_cycles > 0x3) {
			coded_cycles = 0x3;
			cycles = 0x7f;
		}

		coded_cycles <<= 7;
	}

	coded_cycles |= cycles % 128;

	return coded_cycles;
}

#endif /* _LINUX_MFD_SYSCON_ATMEL_SMC_H_ */