| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081 |
- /*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * Author: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
- #ifndef CW1200_PLAT_H_INCLUDED
- #define CW1200_PLAT_H_INCLUDED
- struct cw1200_platform_data_spi {
- u8 spi_bits_per_word; /* REQUIRED */
- u16 ref_clk; /* REQUIRED (in KHz) */
- /* All others are optional */
- bool have_5ghz;
- int reset; /* GPIO to RSTn signal (0 disables) */
- int powerup; /* GPIO to POWERUP signal (0 disables) */
- int (*power_ctrl)(const struct cw1200_platform_data_spi *pdata,
- bool enable); /* Control 3v3 / 1v8 supply */
- int (*clk_ctrl)(const struct cw1200_platform_data_spi *pdata,
- bool enable); /* Control CLK32K */
- const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */
- const char *sdd_file; /* if NULL, will use default for detected hw type */
- };
- struct cw1200_platform_data_sdio {
- u16 ref_clk; /* REQUIRED (in KHz) */
- /* All others are optional */
- bool have_5ghz;
- bool no_nptb; /* SDIO hardware does not support non-power-of-2-blocksizes */
- int reset; /* GPIO to RSTn signal (0 disables) */
- int powerup; /* GPIO to POWERUP signal (0 disables) */
- int irq; /* IRQ line or 0 to use SDIO IRQ */
- int (*power_ctrl)(const struct cw1200_platform_data_sdio *pdata,
- bool enable); /* Control 3v3 / 1v8 supply */
- int (*clk_ctrl)(const struct cw1200_platform_data_sdio *pdata,
- bool enable); /* Control CLK32K */
- const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */
- const char *sdd_file; /* if NULL, will use default for detected hw type */
- };
- /* An example of SPI support in your board setup file:
- static struct cw1200_platform_data_spi cw1200_platform_data = {
- .ref_clk = 38400,
- .spi_bits_per_word = 16,
- .reset = GPIO_RF_RESET,
- .powerup = GPIO_RF_POWERUP,
- .macaddr = wifi_mac_addr,
- .sdd_file = "sdd_sagrad_1091_1098.bin",
- };
- static struct spi_board_info myboard_spi_devices[] __initdata = {
- {
- .modalias = "cw1200_wlan_spi",
- .max_speed_hz = 52000000,
- .bus_num = 0,
- .irq = WIFI_IRQ,
- .platform_data = &cw1200_platform_data,
- .chip_select = 0,
- },
- };
- */
- /* An example of SDIO support in your board setup file:
- static struct cw1200_platform_data_sdio my_cw1200_platform_data = {
- .ref_clk = 38400,
- .have_5ghz = false,
- .sdd_file = "sdd_myplatform.bin",
- };
- cw1200_sdio_set_platform_data(&my_cw1200_platform_data);
- */
- void __init cw1200_sdio_set_platform_data(struct cw1200_platform_data_sdio *pdata);
- #endif /* CW1200_PLAT_H_INCLUDED */
|
