123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141 |
- #ifndef _UAPI__LINUX_MROUTE6_H
- #define _UAPI__LINUX_MROUTE6_H
- #include <linux/types.h>
- #include <linux/sockios.h>
- #include <linux/in6.h> /* For struct sockaddr_in6. */
- /*
- * Based on the MROUTING 3.5 defines primarily to keep
- * source compatibility with BSD.
- *
- * See the pim6sd code for the original history.
- *
- * Protocol Independent Multicast (PIM) data structures included
- * Carlos Picoto (cap@di.fc.ul.pt)
- *
- */
- #define MRT6_BASE 200
- #define MRT6_INIT (MRT6_BASE) /* Activate the kernel mroute code */
- #define MRT6_DONE (MRT6_BASE+1) /* Shutdown the kernel mroute */
- #define MRT6_ADD_MIF (MRT6_BASE+2) /* Add a virtual interface */
- #define MRT6_DEL_MIF (MRT6_BASE+3) /* Delete a virtual interface */
- #define MRT6_ADD_MFC (MRT6_BASE+4) /* Add a multicast forwarding entry */
- #define MRT6_DEL_MFC (MRT6_BASE+5) /* Delete a multicast forwarding entry */
- #define MRT6_VERSION (MRT6_BASE+6) /* Get the kernel multicast version */
- #define MRT6_ASSERT (MRT6_BASE+7) /* Activate PIM assert mode */
- #define MRT6_PIM (MRT6_BASE+8) /* enable PIM code */
- #define MRT6_TABLE (MRT6_BASE+9) /* Specify mroute table ID */
- #define MRT6_ADD_MFC_PROXY (MRT6_BASE+10) /* Add a (*,*|G) mfc entry */
- #define MRT6_DEL_MFC_PROXY (MRT6_BASE+11) /* Del a (*,*|G) mfc entry */
- #define MRT6_MAX (MRT6_BASE+11)
- #define SIOCGETMIFCNT_IN6 SIOCPROTOPRIVATE /* IP protocol privates */
- #define SIOCGETSGCNT_IN6 (SIOCPROTOPRIVATE+1)
- #define SIOCGETRPF (SIOCPROTOPRIVATE+2)
- #define MAXMIFS 32
- typedef unsigned long mifbitmap_t; /* User mode code depends on this lot */
- typedef unsigned short mifi_t;
- #define ALL_MIFS ((mifi_t)(-1))
- #ifndef IF_SETSIZE
- #define IF_SETSIZE 256
- #endif
- typedef __u32 if_mask;
- #define NIFBITS (sizeof(if_mask) * 8) /* bits per mask */
- #if !defined(__KERNEL__)
- #if !defined(DIV_ROUND_UP)
- #define DIV_ROUND_UP(x,y) (((x) + ((y) - 1)) / (y))
- #endif
- #endif
- typedef struct if_set {
- if_mask ifs_bits[DIV_ROUND_UP(IF_SETSIZE, NIFBITS)];
- } if_set;
- #define IF_SET(n, p) ((p)->ifs_bits[(n)/NIFBITS] |= (1 << ((n) % NIFBITS)))
- #define IF_CLR(n, p) ((p)->ifs_bits[(n)/NIFBITS] &= ~(1 << ((n) % NIFBITS)))
- #define IF_ISSET(n, p) ((p)->ifs_bits[(n)/NIFBITS] & (1 << ((n) % NIFBITS)))
- #define IF_COPY(f, t) bcopy(f, t, sizeof(*(f)))
- #define IF_ZERO(p) bzero(p, sizeof(*(p)))
- /*
- * Passed by mrouted for an MRT_ADD_MIF - again we use the
- * mrouted 3.6 structures for compatibility
- */
- struct mif6ctl {
- mifi_t mif6c_mifi; /* Index of MIF */
- unsigned char mif6c_flags; /* MIFF_ flags */
- unsigned char vifc_threshold; /* ttl limit */
- __u16 mif6c_pifi; /* the index of the physical IF */
- unsigned int vifc_rate_limit; /* Rate limiter values (NI) */
- };
- #define MIFF_REGISTER 0x1 /* register vif */
- /*
- * Cache manipulation structures for mrouted and PIMd
- */
- struct mf6cctl {
- struct sockaddr_in6 mf6cc_origin; /* Origin of mcast */
- struct sockaddr_in6 mf6cc_mcastgrp; /* Group in question */
- mifi_t mf6cc_parent; /* Where it arrived */
- struct if_set mf6cc_ifset; /* Where it is going */
- };
- /*
- * Group count retrieval for pim6sd
- */
- struct sioc_sg_req6 {
- struct sockaddr_in6 src;
- struct sockaddr_in6 grp;
- unsigned long pktcnt;
- unsigned long bytecnt;
- unsigned long wrong_if;
- };
- /*
- * To get vif packet counts
- */
- struct sioc_mif_req6 {
- mifi_t mifi; /* Which iface */
- unsigned long icount; /* In packets */
- unsigned long ocount; /* Out packets */
- unsigned long ibytes; /* In bytes */
- unsigned long obytes; /* Out bytes */
- };
- /*
- * That's all usermode folks
- */
- /*
- * Structure used to communicate from kernel to multicast router.
- * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{}
- * used for IPv4 implementation). This is because this structure will be passed via an
- * IPv6 raw socket, on which an application will only receiver the payload i.e the data after
- * the IPv6 header and all the extension headers. (See section 3 of RFC 3542)
- */
- struct mrt6msg {
- #define MRT6MSG_NOCACHE 1
- #define MRT6MSG_WRONGMIF 2
- #define MRT6MSG_WHOLEPKT 3 /* used for use level encap */
- __u8 im6_mbz; /* must be zero */
- __u8 im6_msgtype; /* what type of message */
- __u16 im6_mif; /* mif rec'd on */
- __u32 im6_pad; /* padding for 64 bit arch */
- struct in6_addr im6_src, im6_dst;
- };
- #endif /* _UAPI__LINUX_MROUTE6_H */
|