amdtp-stream.h 8.0 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258
  1. #ifndef SOUND_FIREWIRE_AMDTP_H_INCLUDED
  2. #define SOUND_FIREWIRE_AMDTP_H_INCLUDED
  3. #include <linux/err.h>
  4. #include <linux/interrupt.h>
  5. #include <linux/mutex.h>
  6. #include <linux/sched.h>
  7. #include <sound/asound.h>
  8. #include "packets-buffer.h"
  9. /**
  10. * enum cip_flags - describes details of the streaming protocol
  11. * @CIP_NONBLOCKING: In non-blocking mode, each packet contains
  12. * sample_rate/8000 samples, with rounding up or down to adjust
  13. * for clock skew and left-over fractional samples. This should
  14. * be used if supported by the device.
  15. * @CIP_BLOCKING: In blocking mode, each packet contains either zero or
  16. * SYT_INTERVAL samples, with these two types alternating so that
  17. * the overall sample rate comes out right.
  18. * @CIP_SYNC_TO_DEVICE: In sync to device mode, time stamp in out packets is
  19. * generated by in packets. Defaultly this driver generates timestamp.
  20. * @CIP_EMPTY_WITH_TAG0: Only for in-stream. Empty in-packets have TAG0.
  21. * @CIP_DBC_IS_END_EVENT: Only for in-stream. The value of dbc in an in-packet
  22. * corresponds to the end of event in the packet. Out of IEC 61883.
  23. * @CIP_WRONG_DBS: Only for in-stream. The value of dbs is wrong in in-packets.
  24. * The value of data_block_quadlets is used instead of reported value.
  25. * @CIP_SKIP_DBC_ZERO_CHECK: Only for in-stream. Packets with zero in dbc is
  26. * skipped for detecting discontinuity.
  27. * @CIP_SKIP_INIT_DBC_CHECK: Only for in-stream. The value of dbc in first
  28. * packet is not continuous from an initial value.
  29. * @CIP_EMPTY_HAS_WRONG_DBC: Only for in-stream. The value of dbc in empty
  30. * packet is wrong but the others are correct.
  31. * @CIP_JUMBO_PAYLOAD: Only for in-stream. The number of data blocks in an
  32. * packet is larger than IEC 61883-6 defines. Current implementation
  33. * allows 5 times as large as IEC 61883-6 defines.
  34. */
  35. enum cip_flags {
  36. CIP_NONBLOCKING = 0x00,
  37. CIP_BLOCKING = 0x01,
  38. CIP_SYNC_TO_DEVICE = 0x02,
  39. CIP_EMPTY_WITH_TAG0 = 0x04,
  40. CIP_DBC_IS_END_EVENT = 0x08,
  41. CIP_WRONG_DBS = 0x10,
  42. CIP_SKIP_DBC_ZERO_CHECK = 0x20,
  43. CIP_SKIP_INIT_DBC_CHECK = 0x40,
  44. CIP_EMPTY_HAS_WRONG_DBC = 0x80,
  45. CIP_JUMBO_PAYLOAD = 0x100,
  46. };
  47. /**
  48. * enum cip_sfc - supported Sampling Frequency Codes (SFCs)
  49. * @CIP_SFC_32000: 32,000 data blocks
  50. * @CIP_SFC_44100: 44,100 data blocks
  51. * @CIP_SFC_48000: 48,000 data blocks
  52. * @CIP_SFC_88200: 88,200 data blocks
  53. * @CIP_SFC_96000: 96,000 data blocks
  54. * @CIP_SFC_176400: 176,400 data blocks
  55. * @CIP_SFC_192000: 192,000 data blocks
  56. * @CIP_SFC_COUNT: the number of supported SFCs
  57. *
  58. * These values are used to show nominal Sampling Frequency Code in
  59. * Format Dependent Field (FDF) of AMDTP packet header. In IEC 61883-6:2002,
  60. * this code means the number of events per second. Actually the code
  61. * represents the number of data blocks transferred per second in an AMDTP
  62. * stream.
  63. *
  64. * In IEC 61883-6:2005, some extensions were added to support more types of
  65. * data such as 'One Bit LInear Audio', therefore the meaning of SFC became
  66. * different depending on the types.
  67. *
  68. * Currently our implementation is compatible with IEC 61883-6:2002.
  69. */
  70. enum cip_sfc {
  71. CIP_SFC_32000 = 0,
  72. CIP_SFC_44100 = 1,
  73. CIP_SFC_48000 = 2,
  74. CIP_SFC_88200 = 3,
  75. CIP_SFC_96000 = 4,
  76. CIP_SFC_176400 = 5,
  77. CIP_SFC_192000 = 6,
  78. CIP_SFC_COUNT
  79. };
  80. struct fw_unit;
  81. struct fw_iso_context;
  82. struct snd_pcm_substream;
  83. struct snd_pcm_runtime;
  84. enum amdtp_stream_direction {
  85. AMDTP_OUT_STREAM = 0,
  86. AMDTP_IN_STREAM
  87. };
  88. struct amdtp_stream;
  89. typedef unsigned int (*amdtp_stream_process_data_blocks_t)(
  90. struct amdtp_stream *s,
  91. __be32 *buffer,
  92. unsigned int data_blocks,
  93. unsigned int *syt);
  94. struct amdtp_stream {
  95. struct fw_unit *unit;
  96. enum cip_flags flags;
  97. enum amdtp_stream_direction direction;
  98. struct mutex mutex;
  99. /* For packet processing. */
  100. struct fw_iso_context *context;
  101. struct iso_packets_buffer buffer;
  102. int packet_index;
  103. /* For CIP headers. */
  104. unsigned int source_node_id_field;
  105. unsigned int data_block_quadlets;
  106. unsigned int data_block_counter;
  107. unsigned int fmt;
  108. unsigned int fdf;
  109. /* quirk: fixed interval of dbc between previos/current packets. */
  110. unsigned int tx_dbc_interval;
  111. /* quirk: indicate the value of dbc field in a first packet. */
  112. unsigned int tx_first_dbc;
  113. /* Internal flags. */
  114. enum cip_sfc sfc;
  115. unsigned int syt_interval;
  116. unsigned int transfer_delay;
  117. unsigned int data_block_state;
  118. unsigned int last_syt_offset;
  119. unsigned int syt_offset_state;
  120. /* For a PCM substream processing. */
  121. struct snd_pcm_substream *pcm;
  122. struct tasklet_struct period_tasklet;
  123. unsigned int pcm_buffer_pointer;
  124. unsigned int pcm_period_pointer;
  125. bool pointer_flush;
  126. /* To wait for first packet. */
  127. bool callbacked;
  128. wait_queue_head_t callback_wait;
  129. struct amdtp_stream *sync_slave;
  130. /* For backends to process data blocks. */
  131. void *protocol;
  132. amdtp_stream_process_data_blocks_t process_data_blocks;
  133. };
  134. int amdtp_stream_init(struct amdtp_stream *s, struct fw_unit *unit,
  135. enum amdtp_stream_direction dir, enum cip_flags flags,
  136. unsigned int fmt,
  137. amdtp_stream_process_data_blocks_t process_data_blocks,
  138. unsigned int protocol_size);
  139. void amdtp_stream_destroy(struct amdtp_stream *s);
  140. int amdtp_stream_set_parameters(struct amdtp_stream *s, unsigned int rate,
  141. unsigned int data_block_quadlets);
  142. unsigned int amdtp_stream_get_max_payload(struct amdtp_stream *s);
  143. int amdtp_stream_start(struct amdtp_stream *s, int channel, int speed);
  144. void amdtp_stream_update(struct amdtp_stream *s);
  145. void amdtp_stream_stop(struct amdtp_stream *s);
  146. int amdtp_stream_add_pcm_hw_constraints(struct amdtp_stream *s,
  147. struct snd_pcm_runtime *runtime);
  148. void amdtp_stream_pcm_prepare(struct amdtp_stream *s);
  149. unsigned long amdtp_stream_pcm_pointer(struct amdtp_stream *s);
  150. void amdtp_stream_pcm_abort(struct amdtp_stream *s);
  151. extern const unsigned int amdtp_syt_intervals[CIP_SFC_COUNT];
  152. extern const unsigned int amdtp_rate_table[CIP_SFC_COUNT];
  153. /**
  154. * amdtp_stream_running - check stream is running or not
  155. * @s: the AMDTP stream
  156. *
  157. * If this function returns true, the stream is running.
  158. */
  159. static inline bool amdtp_stream_running(struct amdtp_stream *s)
  160. {
  161. return !IS_ERR(s->context);
  162. }
  163. /**
  164. * amdtp_streaming_error - check for streaming error
  165. * @s: the AMDTP stream
  166. *
  167. * If this function returns true, the stream's packet queue has stopped due to
  168. * an asynchronous error.
  169. */
  170. static inline bool amdtp_streaming_error(struct amdtp_stream *s)
  171. {
  172. return s->packet_index < 0;
  173. }
  174. /**
  175. * amdtp_stream_pcm_running - check PCM substream is running or not
  176. * @s: the AMDTP stream
  177. *
  178. * If this function returns true, PCM substream in the AMDTP stream is running.
  179. */
  180. static inline bool amdtp_stream_pcm_running(struct amdtp_stream *s)
  181. {
  182. return !!s->pcm;
  183. }
  184. /**
  185. * amdtp_stream_pcm_trigger - start/stop playback from a PCM device
  186. * @s: the AMDTP stream
  187. * @pcm: the PCM device to be started, or %NULL to stop the current device
  188. *
  189. * Call this function on a running isochronous stream to enable the actual
  190. * transmission of PCM data. This function should be called from the PCM
  191. * device's .trigger callback.
  192. */
  193. static inline void amdtp_stream_pcm_trigger(struct amdtp_stream *s,
  194. struct snd_pcm_substream *pcm)
  195. {
  196. ACCESS_ONCE(s->pcm) = pcm;
  197. }
  198. static inline bool cip_sfc_is_base_44100(enum cip_sfc sfc)
  199. {
  200. return sfc & 1;
  201. }
  202. static inline void amdtp_stream_set_sync(enum cip_flags sync_mode,
  203. struct amdtp_stream *master,
  204. struct amdtp_stream *slave)
  205. {
  206. if (sync_mode == CIP_SYNC_TO_DEVICE) {
  207. master->flags |= CIP_SYNC_TO_DEVICE;
  208. slave->flags |= CIP_SYNC_TO_DEVICE;
  209. master->sync_slave = slave;
  210. } else {
  211. master->flags &= ~CIP_SYNC_TO_DEVICE;
  212. slave->flags &= ~CIP_SYNC_TO_DEVICE;
  213. master->sync_slave = NULL;
  214. }
  215. slave->sync_slave = NULL;
  216. }
  217. /**
  218. * amdtp_stream_wait_callback - sleep till callbacked or timeout
  219. * @s: the AMDTP stream
  220. * @timeout: msec till timeout
  221. *
  222. * If this function return false, the AMDTP stream should be stopped.
  223. */
  224. static inline bool amdtp_stream_wait_callback(struct amdtp_stream *s,
  225. unsigned int timeout)
  226. {
  227. return wait_event_timeout(s->callback_wait,
  228. s->callbacked == true,
  229. msecs_to_jiffies(timeout)) > 0;
  230. }
  231. #endif