1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162 |
- /*
- * bebob_yamaha.c - a part of driver for BeBoB based devices
- *
- * Copyright (c) 2013-2014 Takashi Sakamoto
- *
- * Licensed under the terms of the GNU General Public License, version 2.
- */
- #include "./bebob.h"
- /*
- * NOTE:
- * Yamaha GO44 is not designed to be used as stand-alone mixer. So any streams
- * must be accompanied. If changing the state, a LED on the device starts to
- * blink and its sync status is false. In this state, the device sounds nothing
- * even if streaming. To start streaming at the current sampling rate is only
- * way to revocer this state. GO46 is better for stand-alone mixer.
- *
- * Both of them have a capability to change its sampling rate up to 192.0kHz.
- * At 192.0kHz, the device reports 4 PCM-in, 1 MIDI-in, 6 PCM-out, 1 MIDI-out.
- * But Yamaha's driver reduce 2 PCM-in, 1 MIDI-in, 2 PCM-out, 1 MIDI-out to use
- * 'Extended Stream Format Information Command - Single Request' in 'Additional
- * AVC commands' defined by BridgeCo.
- * This ALSA driver don't do this because a bit tiresome. Then isochronous
- * streaming with many asynchronous transactions brings sounds with noises.
- * Unfortunately current 'ffado-mixer' generated many asynchronous transaction
- * to observe device's state, mainly check cmp connection and signal format. I
- * reccomend users to close ffado-mixer at 192.0kHz if mixer is needless.
- */
- static enum snd_bebob_clock_type clk_src_types[] = {
- SND_BEBOB_CLOCK_TYPE_INTERNAL,
- SND_BEBOB_CLOCK_TYPE_EXTERNAL, /* S/PDIF */
- };
- static int
- clk_src_get(struct snd_bebob *bebob, unsigned int *id)
- {
- int err;
- err = avc_audio_get_selector(bebob->unit, 0, 4, id);
- if (err < 0)
- return err;
- if (*id >= ARRAY_SIZE(clk_src_types))
- return -EIO;
- return 0;
- }
- static const struct snd_bebob_clock_spec clock_spec = {
- .num = ARRAY_SIZE(clk_src_types),
- .types = clk_src_types,
- .get = &clk_src_get,
- };
- static const struct snd_bebob_rate_spec rate_spec = {
- .get = &snd_bebob_stream_get_rate,
- .set = &snd_bebob_stream_set_rate,
- };
- const struct snd_bebob_spec yamaha_go_spec = {
- .clock = &clock_spec,
- .rate = &rate_spec,
- .meter = NULL
- };
|