| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394 |
- * Clock bindings for Freescale i.MX28
- Required properties:
- - compatible: Should be "fsl,imx28-clkctrl"
- - reg: Address and length of the register set
- - #clock-cells: Should be <1>
- The clock consumer should specify the desired clock by having the clock
- ID in its "clocks" phandle cell. The following is a full list of i.MX28
- clocks and IDs.
- Clock ID
- ------------------
- ref_xtal 0
- pll0 1
- pll1 2
- pll2 3
- ref_cpu 4
- ref_emi 5
- ref_io0 6
- ref_io1 7
- ref_pix 8
- ref_hsadc 9
- ref_gpmi 10
- saif0_sel 11
- saif1_sel 12
- gpmi_sel 13
- ssp0_sel 14
- ssp1_sel 15
- ssp2_sel 16
- ssp3_sel 17
- emi_sel 18
- etm_sel 19
- lcdif_sel 20
- cpu 21
- ptp_sel 22
- cpu_pll 23
- cpu_xtal 24
- hbus 25
- xbus 26
- ssp0_div 27
- ssp1_div 28
- ssp2_div 29
- ssp3_div 30
- gpmi_div 31
- emi_pll 32
- emi_xtal 33
- lcdif_div 34
- etm_div 35
- ptp 36
- saif0_div 37
- saif1_div 38
- clk32k_div 39
- rtc 40
- lradc 41
- spdif_div 42
- clk32k 43
- pwm 44
- uart 45
- ssp0 46
- ssp1 47
- ssp2 48
- ssp3 49
- gpmi 50
- spdif 51
- emi 52
- saif0 53
- saif1 54
- lcdif 55
- etm 56
- fec 57
- can0 58
- can1 59
- usb0 60
- usb1 61
- usb0_phy 62
- usb1_phy 63
- enet_out 64
- Examples:
- clks: clkctrl@80040000 {
- compatible = "fsl,imx28-clkctrl";
- reg = <0x80040000 0x2000>;
- #clock-cells = <1>;
- };
- auart0: serial@8006a000 {
- compatible = "fsl,imx28-auart", "fsl,imx23-auart";
- reg = <0x8006a000 0x2000>;
- interrupts = <112 70 71>;
- clocks = <&clks 45>;
- status = "disabled";
- };
|
